5M40ZM64I5N - MAX V 40-Logic Element CPLD | Intel | 64-MBGA
부품 번호: 5M40ZM64I5N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.95 | $3.95 |
| 10 | $3.55 | $35.50 |
| 100 | $3.15 | $315.00 |
| 500 | $2.78 | $1,390.00 |
| 1,000 | $2.45 | $2,450.00 |
5M40ZM64I5N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that sits between discrete logic gates and FPGAs in the programmable logic hierarchy: discrete logic -> PAL/GAL -> CPLD -> FPGA. CPLDs use flash- or EEPROM-based configuration that retains the design through power cycles, boot in microseconds, and provide predictable timing via a fixed AND/OR macrocell architecture. The MAX V family specifically targets low-power, low-cost glue-logic replacement where deterministic timing matters more than raw logic density.
Key features of the 5M40ZM64I5N include 40 logic elements (LEs) organized as 32 macrocells, 1.6 V core voltage with 1.8 V/2.5 V/3.3 V multi-voltage I/O support, JTAG IEEE 1149.1 boundary-scan and in-system programmability, and an integrated user flash memory block. The non-volatile architecture eliminates external boot PROM, while the 118 MHz internal frequency supports common interface rates including SPI, I2C, UART, and LVDS bridging.
The device uses a low-power CMOS process optimized for standby current typically under 1 mA, and operates across the industrial -40C to +100C temperature range (I5N speed/grade designation). Its 64-ball MBGA package supports surface-mount assembly on standard FR-4 PCB, with 30 user I/Os providing sufficient headroom for bus-bridging and peripheral expansion tasks.
Typical applications include bus interface bridging (legacy to modern MCUs), I/O expansion for processors with limited pin counts, power-sequence and reset-controller logic, LED and display driving controllers, and industrial control glue logic. The instant-on non-volatile boot makes it ideal for safety-critical or deterministic-latency applications.
When designing with this part, ensure I/O bank voltage matches the connected device and provide adequate decoupling (100 nF plus 10 uF bulk) on each supply pin. JTAG chain integration is recommended for boundary-scan test access.
This page synthesizes distributor pricing, MBGA-64 drop-in alternatives from the MAX V family, and practical design notes not consolidated on the manufacturer datasheet.
드롭인 대체품: 5M40ZM64I5N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 5M40ZM64I5N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Programming Interface, Configuration Memory, Operating Temperature, Operating Temperature Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
5M40ZM64C5N
✅ 드롭인✓ 재고 있음
$1.45 / 개
데이터시트 보기 →5M40ZM64I5
✅ 드롭인✓ 재고 있음
$4.05 / 개
데이터시트 보기 →5M40ZM64C5
✅ 드롭인✓ 재고 있음
$4.05 / 개
데이터시트 보기 →5M40ZM64C4N
✅ 드롭인✓ 재고 있음
$0.48 / 개
데이터시트 보기 →5M40ZM64C4
✅ 드롭인✓ 재고 있음
$3.85 / 개
데이터시트 보기 →5M40ZM64A5N
✅ 드롭인✓ 재고 있음
$2.55 / 개
데이터시트 보기 →5M40ZM64I5N 최대 정격 & 전기적 특성
| Device Family | MAX V |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Logic Elements | 40 |
| Macrocells | 32 |
| User I/Os | 30 |
| Internal Frequency | 118 MHz |
| Propagation Delay (tPD) | 14 ns |
| Core Voltage | 1.6 V |
| I/O Voltage Support | 1.8 V / 2.5 V / 3.3 V (multi-voltage I/O) |
| 패키지 | MBGA-64, 4.50 x 4.50 mm, 0.50 mm pitch |
| 핀 수 | 64 |
| 동작 온도 | -40C to +100C (industrial) |
| Programming Interface | JTAG IEEE 1149.1 (in-system programmable) |
| Non-volatile Configuration | Yes (flash-based, instant-on) |
5M40ZM64I5N mbga-64, 4.50 x 4.50 mm, 0.50 mm pitch 핀 구성 가이드
5M40ZM64I5N(mbga-64, 4.50 x 4.50 mm, 0.50 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 5M40ZM64I5N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
5M40ZM64I5N 적합 용도: 6 애플리케이션s: Bus Interface Bridging, I/O Expansion for Low-Pin MCUs, Power Sequence and Reset Controller, LED Display and Sign Driver, Industrial Glue Logic Replacement, Legacy Interface Adapter.
Bus Interface Bridging
The 5M40ZM64I5N bridges legacy parallel buses (8086, Z80, ISA) to modern MCU peripherals, replacing 3-5 discrete 74-series logic packages. Its 118 MHz internal frequency and 14 ns tPD handle synchronous bus protocols up to ~70 MHz, while 30 user I/Os comfortably accommodate address/databus multiplexing. Compared to an FPGA, the MAX V's instant-on non-volatile boot is critical for deterministic cold-start timing. Decoupling: 100 nF per supply ball, 10 uF bulk near package.
추천
I/O Expansion for Low-Pin MCUs
The 5M40ZM64I5N expands GPIO on low-pin-count MCUs (e.g., 32-pin Cortex-M0) by up to 30 additional user I/Os, routed via SPI or I2C from the host MCU. Its 1.8/2.5/3.3 V multi-voltage I/O banks interface directly with 3.3 V MCUs and 1.8 V sensors without level shifters. The non-volatile configuration eliminates bootloader code. Trade-off: ~1 ms programming time on first power, negligible after warm boot.
추천
Power Sequence and Reset Controller
The 5M40ZM64I5N implements multi-rail power sequencing and watchdog reset logic for systems with 3-5 supply rails. Its 40 logic elements easily encode sequencing state machines with up to 8 states plus watchdog timer. Industrial -40C to +100C rating suits industrial and telecom environments. Compared to a discrete supervisor IC, the CPLD adds flexible timing and JTAG-reprogrammability for late-stage design changes.
추천
LED Display and Sign Driver
The 5M40ZM64I5N drives 7-segment LED displays, dot-matrix panels, and small signage via Charlieplexing or multiplexing. With 30 user I/Os, it can drive up to 8-digit 7-segment displays or a 16x16 LED matrix through row/column multiplexing at refresh rates above 100 Hz. Industrial temperature range suits outdoor signage. Its 14 ns tPD ensures crisp PWM dimming without visible flicker at duty cycles down to 1%.
추천
Industrial Glue Logic Replacement
The 5M40ZM64I5N replaces 74HC/HCT glue-logic packages in industrial PLC and motor-control boards, integrating AND/OR/XOR/flip-flop functions into one non-volatile device. Its 14 ns tPD matches 74HC timing, while the -40C to +100C industrial range handles factory environments. JTAG in-system programmability allows field updates without desoldering - critical for installed industrial equipment.
추천
Legacy Interface Adapter
The 5M40ZM64I5N adapts legacy interfaces (parallel port, IDE, ISA, SCSI) to modern MCUs or FPGAs in test equipment and instrumentation. Its 30 user I/Os handle 16-bit data plus control signals for typical parallel legacy buses. The deterministic 14 ns propagation delay preserves timing margins that would otherwise be lost in FPGA soft-logic latency. Industrial temp range supports laboratory and field-test gear.
추천
추천 제품 요약
엔지니어링 참조 데이터: 5M40ZM64I5N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 5M40ZM64C5N | 5M40ZM64I5 | 5M40ZM64C5 | 5M40ZM64C4N | 5M40ZM64C4 | 5M40ZM64A5N |
|---|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | MBGA-64 (4.5 x 4.5 mm, 0.5 mm pitch) | MBGA-64 - same | MBGA-64 - same | MBGA-64 - same | MBGA-64 - same | MBGA-64 - same | MBGA-64 - same |
| Logic Elements | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| User I/Os | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| Internal Frequency | 118 MHz | 118 MHz | 118 MHz | 118 MHz | 118 MHz (speed grade 4) | 118 MHz (speed grade 4) | 118 MHz |
| Propagation Delay (tPD) | 14 ns | 14 ns | 14 ns | 14 ns | ~16 ns (speed grade 4) | ~16 ns (speed grade 4) | 14 ns |
| Operating Temperature | -40C to +100C (industrial) | 0C to +85C (commercial) | -40C to +100C (industrial) | 0C to +85C (commercial) | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +125C (automotive) |
| Core Voltage | 1.6 V | 1.6 V | 1.6 V | 1.6 V | 1.6 V | 1.6 V | 1.6 V |
| I/O Voltage Support | 1.8/2.5/3.3 V | 1.8/2.5/3.3 V | 1.8/2.5/3.3 V | 1.8/2.5/3.3 V | 1.8/2.5/3.3 V | 1.8/2.5/3.3 V | 1.8/2.5/3.3 V |
| Unit Price (qty 1) | $3.95 | ~$3.50 | ~$3.80 | ~$3.40 | ~$3.20 | ~$3.10 | ~$4.50 |
주요 차별점
- Industrial temperature range with MAX V reliability (vs 5M40ZM64C5N)
- Speed grade 5 (14 ns tPD) for fastest timing margins (vs 5M40ZM64C4N)
- N suffix indicates tape-and-reel packaging (vs 5M40ZM64I5)
설계 노트
The 5M40ZM64I5N requires clean 1.6 V core supply and 1.8/2.5/3.3 V I/O supply. Place 100 nF ceramic decoupling capacitors on every supply ball (VCCINT and VCCIO), plus 10 uF bulk tantalum or ceramic near the package. According to MAX V design guidelines, supply ramp time should be monotonic and not exceed 1 ms to prevent configuration latch-up. Estimated: at 118 MHz internal frequency, typical core current is ~15-25 mA, well below the package thermal limit.
MBGA-64 packages require 0.5 mm pitch fanout and microvia or via-in-pad technology for reliable assembly. Use a 4-layer PCB with continuous ground plane beneath the CPLD for supply decoupling and thermal dissipation. According to Intel/Altera PCB design notes, MBGA thermal pads must be soldered to a thermal via array (typically 9 vias in 3x3 grid under the package center) for proper heat spreading. Avoid signal traces under BGA escape region to prevent impedance discontinuities.
Do not leave JTAG pins (TCK, TMS, TDI, TDO) floating - the JTAG state machine requires proper pull-up/pull-down per IEEE 1149.1 or the device may enter unintended states at power-up. According to MAX V datasheet, TDI must have a 10 kohm pull-up to VCCIO and TCK should be pulled low when not in use. Also, ensure the nCONFIG pin is not asserted low during normal operation or the device will reset to factory configuration. For multi-voltage I/O banks, all VCCIO pins in a bank must be tied to the same voltage.
Group I/O banks by voltage to minimize level-shifter requirements: dedicate one I/O bank to 1.8 V for legacy interfaces, another to 3.3 V for MCUs. According to MAX V design guidelines, I/O bank placement on the MBGA-64 footprint is fixed - consult the pinout table before PCB layout. Place the JTAG header near a board edge for test-probe access, and route TCK with a guard trace to ground to prevent noise-induced programming errors at high frequency.
규정 준수 정보
RoHS, REACH, and AEC-Q100 compliance data not available in the verified web sources. Lead-free assumed based on Altera/Intel policy for MBGA packages. AEC-Q100 not applicable to industrial-grade I5N variant; see 5M40ZM64A5N for automotive-qualified version.
