BSC9132NXE7KNKB - QorIQ Qonverge SoC 2x e500 + 2x StarCore | NXP
부품 번호: BSC9132NXE7KNKB ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268 | $2,680.00 |
| 100 | $245 | $24,500.00 |
| 500 | $220 | $110,000.00 |
| 1,000 | $198 | $198,000.00 |
BSC9132NXE7KNKB 개요
A QorIQ Qonverge SoC is a heterogeneous communications processor that combines general-purpose CPU cores with dedicated DSP cores and hardware accelerators on a single die. The BSC9132 sits in NXP's Qonverge family hierarchy as: Qonverge SoC -> QorIQ communications processor -> multicore SoC -> embedded processor -> semiconductor. By placing the e500 cores and SC3850 DSPs on a coherent interconnect with shared DDR3 controllers, the device eliminates the latency and bandwidth overhead of passing data between physically separate CPU and DSP chips in legacy designs.
Key features include dual e500 cores running up to 1.333 GHz, dual SC3850 StarCore DSP cores at 1 GHz, MAPLE-B2P baseband acceleration for LTE and 3GPHY processing, integrated SEC (security engine) for crypto offload, dual DDR3 memory controllers with ECC support, and an industrial temperature range of -40C to +105C. The 780-FCBGA package provides high I/O density required by parallel memory, SerDes, and Ethernet interfaces.
On the architecture side, the BSC9132 uses a coherent fabric that allows software to schedule baseband tasks on the SC3850 DSPs while simultaneously running control-plane L2/L3 protocols on the e500 cores. The MAPLE-B2P engine offloads turbo decoding, Viterbi decoding, and FFT/iFFT operations, freeing DSP cycles for higher-layer baseband processing. SEC handles IPSec and Kasumi/Snow 3G ciphering at line rate, offloading the CPU cores from crypto overhead in secure backhaul links.
Typical applications include small-cell LTE/3G base stations where MAPLE-B2P accelerates Layer-1 processing on a single chip instead of a multi-board CPU+DSP+ASIC stack, enterprise VoIP gateways requiring concurrent signaling and media processing, smart-grid infrastructure nodes with deterministic DSP workload for power-line monitoring, and military/defense radio systems where the industrial temperature grade and security engine meet ruggedization and secure-comms requirements.
When designing with the BSC9132NXE7KNKB, allocate thermal headroom for sustained 1 GHz operation across four cores; reference the NXP hardware-design checklist for FCBGA PCB stackup, SerDes routing, and DDR3 length-matching tolerances. Note that this part is at End of Life per the NXP product page, so long-life designs should plan for last-time-buy or consider the successor QorIQ Qonverge family parts.
This page synthesizes NXP product-page lifecycle status, distributor pricing snapshots, and curated cross-references to alternative QorIQ SoCs (P2040, P2020, BSC9131) - practical procurement context that is not consolidated in any single source document.
드롭인 대체품: BSC9132NXE7KNKB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: BSC9132NXE7KNKB (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Series, Package, Ethernet, Product Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
BSC9132NSN7KNKB
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$78.28 / 개
데이터시트 보기 →BSC9131NJE1HHHB
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$32.9 / 개
데이터시트 보기 →BSC9132NXE7MMC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
BSC9132NXE7KNKB 최대 정격 & 전기적 특성
| Architecture | PowerPC e500 + StarCore SC3850 |
| Number of Cores | 2x e500 + 2x SC3850 |
| e500 Core Frequency | Up to 1.333 GHz |
| StarCore DSP Frequency | 1 GHz |
| 데이터 버스 폭 | 32-bit |
| Accelerator | MAPLE-B2P baseband engine |
| Memory Controller | DDR3 with ECC |
| Security Engine | SEC (IPSec, Kasumi/Snow 3G) |
| 패키지 | 780-FCBGA (23x23 mm) |
| 동작 온도 | -40C to +105C (Industrial) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant (per NXP product page) |
BSC9132NXE7KNKB 780-fcbga (23x23 mm) 핀 구성 가이드
BSC9132NXE7KNKB(780-fcbga (23x23 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: BSC9132NXE7KNKB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
BSC9132NXE7KNKB 적합 용도: 6 애플리케이션s: Small-Cell LTE/3G Base Station, Enterprise VoIP Gateway, Smart Grid Infrastructure Node, Military / Defense Radio System, Industrial IoT Gateway with Edge Analytics, Network Security Appliance.
Small-Cell LTE/3G Base Station
The BSC9132NXE7KNKB's dual e500 cores at 1.333 GHz and dual SC3850 DSP cores at 1 GHz run the L2/L3 stack and physical-layer baseband on a single coherent die. The MAPLE-B2P accelerator offloads turbo/Viterbi decoding and FFTs, freeing DSP cycles for higher-layer processing and meeting 3GPP release timing budgets. The integrated SEC engine handles IPSec and Kasumi/Snow3G for encrypted backhaul at line rate, eliminating an external crypto chip. Dual DDR3 controllers with ECC feed both core clusters from one shared memory pool, simplifying PCB layout versus legacy CPU+DSP+ASIC stacks.
추천
Enterprise VoIP Gateway
VoIP gateways need concurrent signaling (SIP/H.323 on e500 cores) and media processing (G.729, Opus, echo cancellation on SC3850 DSPs). The BSC9132NXE7KNKB's heterogeneous core mix lets VoIP software partition cleanly without inter-chip messaging overhead. Industrial -40C to +105C operation covers outdoor enterprise demarcation cabinets. SEC engine accelerates SRTP/TLS media encryption without taxing DSP cycles, preserving channel density. The 780-FCBGA's high I/O density exposes enough Ethernet MACs and TDM interfaces for multi-port T1/E1-to-SIP gateways in a single board design.
추천
Smart Grid Infrastructure Node
Smart-grid control nodes run IEC 61850 stack, time-sensitive networking, and DSP-based power-line signal analysis on the same platform. The BSC9132NXE7KNKB's industrial temperature grade and ECC-protected DDR3 controllers deliver the deterministic behavior required for substation-grade equipment. Dual e500 cores execute the SCADA/protocol stack while SC3850 DSPs run power-line modulation, fault-detection DSP, and metering math concurrently. MAPLE-B2P accelerates Reed-Solomon and convolutional coding used in narrowband PLC. RoHS compliance and long-life NXP product-line maturity make it acceptable for utility-grade deployments with 15-20 year support requirements.
추천
Military / Defense Radio System
Defense radio platforms require a ruggedized SoC with secure crypto, deterministic DSP, and a wide operating-temperature range. The BSC9132NXE7KNKB meets all three: -40C to +105C operation for vehicle-mounted and forward-deployed equipment, SEC engine for Type-1-class crypto offload, and SC3850 DSPs running tactical waveforms (SINCGARS, HAVE QUICK) alongside e500 cores handling routing and Link 16 stack. MAPLE-B2P accelerates forward-error-correction required for low-SNR tactical links. The 780-FCBGA is qualified for harsh-environment shock and vibration per JEDEC BGA standards when assembled with underfill.
추천
Industrial IoT Gateway with Edge Analytics
Edge analytics gateways need both protocol translation (Modbus, OPC-UA, MQTT on e500) and on-board DSP analytics (vibration spectral analysis, anomaly detection on SC3850). The BSC9132NXE7KNKB covers both in a single SoC, reducing bill-of-materials. Industrial temperature range and ECC memory support factory-floor deployments. Dual Gigabit Ethernet MACs with integrated switching simplify daisy-chain industrial topologies. Long product-cycle maturity (NXP QorIQ) suits IIoT vendors needing 10+ years of supply continuity, though the EOL status of this specific part means new IIoT designs should consider LS-series successors.
추천
Network Security Appliance
Mid-range UTM/firewall appliances benefit from the BSC9132NXE7KNKB's SEC engine for wire-speed IPSec/SSL offload while e500 cores run the firewall/IPS policy engine. Dual DDR3 controllers feed encryption pipelines without bandwidth bottlenecks. The integrated design reduces attack surface versus multi-chip designs and simplifies FIPS/CC certification. The 780-FCBGA's thermal envelope handles sustained encryption workloads. Industrial temperature support enables deployment in non-datacenter environments. For new designs, evaluate Layerscape LS1046A which adds 10GbE and modern crypto accelerators but requires software revalidation.
추천
추천 제품 요약
엔지니어링 참조 데이터: BSC9132NXE7KNKB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | BSC9132NSN7KNKB | BSC9131NJE1HHHB | BSC9132NXE7MMC |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCBGA (23x23) | 780-FCBGA (23x23) | 780-FCBGA (23x23) | 780-FCBGA (23x23) |
| e500 Core Count | 2 | 2 | 1 | 2 |
| StarCore DSP Count | 2 (SC3850) | 2 (SC3850) | 1 | 2 (SC3850) |
| MAPLE Accelerator | MAPLE-B2P | MAPLE-B2P | MAPLE-B | MAPLE-B2P |
| Memory Controller | Dual DDR3 with ECC | Dual DDR3 with ECC | Single DDR3 with ECC | Dual DDR3 with ECC |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Lifecycle Status | End of Life | End of Life | End of Life | End of Life |
주요 차별점
- Heterogeneous CPU+DSP fabric in one coherent die (vs P2040NSE7HLC)
- Higher e500 frequency bin than the NSN sibling (vs BSC9132NSN7KNKB)
- Dual-channel DDR3 with ECC shared by CPUs and DSPs (vs BSC9131NJE1HHHB)
설계 노트
Estimated: with two e500 cores at 1.333 GHz plus two SC3850 DSPs at 1 GHz all running benchmark workloads, the BSC9132NXE7KNKB can draw 8-12 W. Reference the NXP hardware design guide for the 780-FCBGA thermal model and provide a minimum 4-layer PCB with unbroken ground plane under the package, plus thermal vias to inner copper layers. Without active airflow at 85C ambient, derate clock frequency via dynamic frequency scaling. The exposed die side of FCBGA requires underfill when used in high-shock industrial environments.
The 780-FCBGA package demands a high-density PCB stackup with matched-length SerDes lanes and DDR3 traces per the JEDEC specification. Use the NXP BSC9132 hardware design checklist to lock down via-in-pad geometry, microvia aspect ratios, and reference-plane stitching for the DDR3 byte lanes. Pin 1 location, ball map, and keep-out zones must be imported from the IBIS and BSDL files before schematic capture. Power-rail decoupling requires bulk, mid, and high-frequency ceramic capacitors distributed under the package per the reference schematic.
SerDes lanes on the BSC9132NXE7KNKB are tuned for 0.1 to 0.15 dB/inch loss at the target baud rate; route them on optimized stripline/microstrip layers with continuous reference planes and avoid crossing plane splits. The dual DDR3 controllers have separate byte-lane groups with strict length matching; route each byte lane to within 5 ps of its siblings. Ethernet MACs require magnetics on each port and a chassis ground stitch within 25 mm of the connector. JTAG and TRACE signals must be accessible for production board test.
Do not confuse the BSC9132NXE7KNKB speed code - NXE in the part suffix indicates 1.333 GHz for the e500 cores; choose the NSN variant if your firmware does not need full speed and you want lower power and thermal output. Boot mode configuration is sampled on POR and determines boot source (NOR, NAND, SPI, SD, eMMC); misconfiguration is the most common cause of dead-on-arrival boards. BSP selection must match silicon revision - early revisions have errata that affect SEC and SerDes, addressed in later mask sets.
규정 준수 정보
RoHS compliant per NXP QorIQ product family compliance statement. Industrial temperature grade only; AEC-Q100 automotive qualification not available. Conflict-mineral statement available from NXP corporate compliance.
