Texas Instruments

DS90CR212MTD - 48-TSSOP LVDS Line Receiver | TI

부품 번호: DS90CR212MTD ✓ 활성
TSSOP-48 Package
MOQ: 1 |

DS90CR212MTD 개요

The Texas Instruments DS90CR212MTD is a quad LVDS line receiver designed for receiving low-voltage differential signals, with four receivers arranged in a 48-pin TSSOP package. The device is associated with 21-bit Channel Link signaling, operates over a commercial temperature range of -10°C to +70°C, and is supplied in a surface-mount rectangular package with gull-wing leads. Its 48-terminal package and balanced differential inputs position it for point-to-point digital links that require a dedicated receiver function.

An LVDS line receiver is an interface IC that detects the voltage difference between two complementary conductors and converts that differential information into a CMOS-compatible logic signal. Within the signal-chain hierarchy, an LVDS receiver belongs to the broader family of differential line receivers, interface ICs, and semiconductor devices. This category is distinct from an LVDS transmitter: the receiver restores valid digital logic at the far end of a cable or board-to-board connection after differential transmission.

The DS90CR212MTD provides four line-receiver channels in one package, reducing component count on multi-channel interface boards. Its rectangular 48-pin TSSOP construction is intended for surface-mount assembly, while the commercial temperature range covers applications operating from -10°C through +70°C. The package body measures 12.5 mm by 6.1 mm according to the product listing, allowing it to be accommodated on boards requiring a higher pin-count interface package rather than a small-outline package.

The DS90CR212MTD is categorized as a specialized interface IC and is specifically described as an LVDS line receiver. Its channel architecture is intended to accept low-amplitude differential signaling, which is commonly used to carry clock or data information over balanced interconnects. The exact signaling rate, input voltage range, supply voltage, output timing, and input impedance must be confirmed from the manufacturer datasheet before a new design relies on those values.

Typical implementation areas include multi-channel digital backplanes, industrial control links, embedded data acquisition, test and measurement systems, and communications equipment that uses balanced interconnects. Consolidating four receivers into one package is particularly useful when a system must terminate or translate several parallel differential signals. Board designers should preserve controlled-impedance routing and provide the decoupling and grounding arrangements recommended for high-speed interface circuits.

The primary layout consideration is the pin density of the 48-terminal TSSOP package. Use the manufacturer pin-description table to assign supply, ground, differential inputs, and logic outputs, and keep unused inputs in their specified termination states. Because no complete pin map is published on the product pages associated with this part, verify each connection against the current Texas Instruments datasheet rather than inferring functions from neighboring pins.

This product record combines package, environmental, interface-classification, and cross-reference information with practical implementation guidance. It also identifies nearby same-package TI line-receiver options for design reviews while clearly separating confirmed attributes from parameters that require datasheet confirmation. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing requirements.

드롭인 대체품: DS90CR212MTD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: DS90CR212MTD (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, Package Type.

Texas Instruments
Product Type: 21-bit Channel Link line driver interface IC
Package: 48-terminal TSSOP
비교 대상: DS90CR212MTD →
Texas Instruments
Product Type: LVDS 18-bit color flat-panel display link receiver
Package: 48-TFSOP, 0.240 inch, 6.10 mm width
Package Type: 48-pin TSSOP
비교 대상: DS90CR212MTD →

DS90CR214MTD

✅ 드롭인
📦 TSSOP-48
Same 48-pin TSSOP line-receiver package; the alternative is listed at 173 Mbps, while the target's data rate requires manufacturer-datasheet confirmation.

📋 참조 대체품 (카탈로그에 없음)

DS90CR562MTD

✅ 드롭인
Texas Instruments
📦 TSSOP-48
LVDS 18-bit color flat-panel display link receiver · 3/21 · 21 · 3 · 4.5 V to 5.5 V · FPD-Link, LVDS · LVDS (Low Voltage Differential Signaling) · 21 bits of CMOS/TTL data

가격 문의

데이터시트 보기 →

DS90CR213MTD

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 TSSOP-48
21-bit Channel Link line driver interface IC · 21 bits · 66 MHz · 5.25 V · EIA-644 / TIA-644 · -10°C to +70°C · Commercial · 48-terminal TSSOP

가격 문의

데이터시트 보기 →

DS90CR212MTD 사양

Product Type LVDS line receiver IC
Receiver Configuration 4 line receivers
Signaling Technology LVDS differential signaling
Associated Interface 21-bit Channel Link
Terminal Count 48 terminals
Package Type TSSOP-48
Package Shape Rectangular
장착 스타일 Surface mount
Terminal Form Gull wing
Body Length 12.5 mm
Body Width 6.1 mm
동작 온도 범위 -10°C to +70°C
Temperature Grade Commercial

DS90CR212MTD rectangular 핀 구성 가이드

DS90CR212MTD(rectangular 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DS90CR212MTD의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DS90CR212MTD.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DS90CR212MTD 적합 용도: 6 애플리케이션s: Multi-Channel LVDS Backplane Interfaces, Industrial Control and Data Acquisition, Test and Measurement Equipment, Embedded Communications Equipment, Digital Signal Backplanes, Instrumentation and Sensor Interconnect Boards.

🌐

Multi-Channel LVDS Backplane Interfaces

The DS90CR212MTD fits multi-channel LVDS backplane interfaces because it combines four line-receiver functions in one 48-pin TSSOP package. The balanced inputs are intended to recover digital information from differential interconnects, allowing several related clock or data channels to be received through a single component. Its commercial rating of -10°C to +70°C supports equipment deployed in controlled commercial environments. The board must preserve signal integrity with short, impedance-controlled routes, solid ground references, and clean return paths. Before layout release, verify the receiver-channel allocation and every power, ground, and signal pin in the manufacturer datasheet.

🏭

Industrial Control and Data Acquisition

The DS90CR212MTD can support industrial control and data-acquisition boards that distribute several low-voltage differential signals between instrument and controller sections. Its four-receiver arrangement reduces the number of separate receiver packages needed on a multi-node measurement interface. The commercial temperature range of -10°C to +70°C matches many indoor production and test environments, although extended-temperature installations require a suitably rated alternative. Keep analog and digital return currents separated, use the recommended supply bypassing, and validate differential thresholds and output timing against the final cable and grounding configuration.

🖥️

Test and Measurement Equipment

The DS90CR212MTD is appropriate for test and measurement equipment that must receive multiple differential clock, trigger, or control signals from an external fixture. Consolidating four receiver functions into a 48-TSSOP device can simplify routing on densely populated instrument boards while preserving a consistent differential-signaling architecture. Its 12.5 mm by 6.1 mm listed body dimensions require adequate placement and fan-out space within the measurement system. Use short return paths and controlled-impedance interconnects to limit reflections, and confirm receiver latency and output timing before using the device in precision timing paths.

📡

Embedded Communications Equipment

The DS90CR212MTD suits embedded communications equipment requiring balanced receive interfaces for panel links, inter-board connections, or peripheral synchronization. Four LVDS receiver channels in one 48-pin TSSOP package can support compact multi-lane equipment without assigning a separate receiver package to every pair. Its surface-mount gull-wing construction supports automated assembly, while the -10°C to +70°C operating range suits controlled indoor systems. Place input and supply decoupling near the device, preserve the differential pair geometry, and confirm input termination requirements from the manufacturer datasheet for the specific data rate.

🖥️

Digital Signal Backplanes

The DS90CR212MTD can be evaluated for digital signal backplanes where several differential channels arrive from a connector, mezzanine card, or neighboring processing module. The quad line-receiver configuration supports scalable channel grouping, and the 48-pin TSSOP package provides a defined multi-pin interface footprint. Board-level signal integrity is critical because unequal routing, poor plane transitions, or shared return-current paths can degrade differential signaling. Maintain continuous reference planes, avoid stubs, use matched escape routing from the connector, and confirm the device's propagation-delay and output-timing limits before defining system timing margins.

🔧

Instrumentation and Sensor Interconnect Boards

The DS90CR212MTD may be used in instrumentation and sensor-interconnect boards that combine low-level differential signaling with digital control traffic. The receiver's four-channel architecture can consolidate several input pairs while leaving the system with a regular, compact package arrangement. The commercial temperature specification supports typical laboratory and indoor control equipment, but enclosure temperature excursions must remain within -10°C to +70°C. Use careful partitioning between sensitive input routing and switching circuitry, provide local decoupling, and verify all input termination and enable states in the manufacturer datasheet before production release.

What is the DS90CR212MTD?
The DS90CR212MTD is a Texas Instruments quad LVDS line receiver IC in a 48-pin TSSOP package. It is listed as a specialized interface device associated with 21-bit Channel Link signaling. According to the Texas Instruments product and distributor listings, the device provides four line-receiver functions, uses a rectangular surface-mount package, and is intended for balanced differential-signal reception in digital communication systems.
What package is used by the DS90CR212MTD?
The DS90CR212MTD uses a 48-pin rectangular TSSOP package with gull-wing leads for surface mounting. Its listed body dimensions are 12.5 mm long and 6.1 mm wide. The product listing identifies 48 terminals, making the enclosure substantially denser than a 24-pin TSSOP. Confirm the land pattern, pin-one orientation, and exposed-pad requirements against the current manufacturer datasheet before fabrication.
What is the operating temperature range of DS90CR212MTD?
The DS90CR212MTD has a stated operating temperature range of -10°C to +70°C and is classified as commercial grade. This rating covers general commercial equipment environments but does not establish suitability for industrial extended-temperature, automotive, or military systems. Those categories require a device with the corresponding temperature grade and qualification, so confirm the complete environmental specification before using the part outside its stated range.
Where can I download the DS90CR212MTD datasheet PDF?
The manufacturer datasheet should be obtained through Texas Instruments' product documentation for the DS90CR212 family. The verified product pages identify DS90CR212MTD as a 48-TSSOP line receiver but do not expose a stable direct PDF link in their listing text. Use the exact family and full orderable MPN when locating the document, then verify the pin table, electrical characteristics, recommended application circuit, and package drawing before releasing a PCB design.
Where can I find the DS90CR212MTD pinout?
The DS90CR212MTD pinout is defined by the pin-description table in the manufacturer datasheet for the 48-terminal TSSOP package. The accessible product listings confirm the package and terminal count but do not publish a complete numbered pin map. Do not infer signal assignments from the 48-pin outline; verify power, ground, differential input pairs, output pins, and any reserved terminals against the datasheet revision applicable to your production release.
Is DS90CR212MTD in stock?
Current stock and delivery status should be requested through the Request a Quote form on this page. The verified distributor listing describes the exact MPN as available for ordering, but it does not provide a dependable stock quantity or a fixed lead-time commitment. For production planning, request the current on-hand quantity, scheduled delivery date, minimum order quantity, and traceability information for the exact 48-TSSOP orderable MPN.
What is the price of DS90CR212MTD?
The current commercial price for DS90CR212MTD is handled through the Request a Quote form on this page. No qualifying quantity-break table with explicit prices was available for the exact MPN, so this record does not publish a potentially stale price. The quote request should confirm unit pricing, volume breaks, extended order quantities, date code, lot traceability, and the Texas Instruments manufacturer part number being supplied.
What is the lead time for DS90CR212MTD?
The current lead time for DS90CR212MTD should be confirmed through the Request a Quote form on this page. The distributor listing indicates that the exact part is offered for ordering, but it does not state a guaranteed production lead time. Ask for the factory lead time separately from any distributor handling time, and specify whether your schedule permits factory packing, partial reels, or another traceable delivery configuration.
Where to buy DS90CR212MTD online?
Use the Request a Quote form on this page to request DS90CR212MTD from XAIPART with the quantity and packaging needed for your build. The form is the appropriate route for current commercial terms because the product record contains no explicit quantity-break pricing for the exact 48-TSSOP MPN. Include your target date code, acceptable delivery window, inspection requirements, and whether each order must retain the original manufacturer labeling and packing.
What are the key specifications of DS90CR212MTD that engineers should know?
The confirmed engineering attributes of DS90CR212MTD are its quad line-receiver configuration, LVDS differential signaling, 48-terminal rectangular TSSOP package, surface-mount gull-wing leads, commercial temperature grade, and -10°C to +70°C operating range. Its listed body dimensions are 12.5 mm by 6.1 mm. Supply voltage, maximum data rate, input impedance, differential input limits, and propagation delay must be taken from the manufacturer datasheet before circuit sizing or timing analysis.
DS90CR212MTD vs DS90CR214MTD - which is better for a 48-TSSOP interface design?
DS90CR214MTD is the closer documented alternative because the cross-reference listing describes it as a 48-pin TSSOP line receiver rated at 173 Mbps with a 0.45 V signal description. DS90CR212MTD is confirmed as a four-channel LVDS line receiver in the same 48-TSSOP package, but its own data rate is not stated in the accessible product listings. Choose only after comparing the full electrical and pin tables.
What is the difference between DS90CR212MTD and DS90CR562MTD?
The cross-reference listing describes DS90CR562MTD as an 18-bit FPD line receiver in a 48-pin TSSOP package, while DS90CR212MTD is associated with 21-bit Channel Link signaling and also uses 48-pin TSSOP. The documented signaling difference is three bits between 21-bit Channel Link and the 18-bit FPD description. Package similarity alone does not establish pin compatibility, so verify input topology, supply levels, logic outputs, and timing before substitution.
When should I choose DS90CR212MTD over DS90CR214MTD?
Choose DS90CR212MTD when the design specifically calls for a four-channel LVDS receiver in a 48-TSSOP package and its verified electrical characteristics meet the interface requirements. DS90CR214MTD is a relevant same-package comparison because its listing identifies 173 Mbps operation. The deciding factors should be receiver-channel requirements, data rate, supply voltage, input thresholds, output timing, and exact pin assignments rather than package dimensions alone.
Can DS90CR214MTD replace DS90CR212MTD?
DS90CR214MTD is a candidate for evaluation because it is also identified as a 48-pin TSSOP line receiver, but it is not automatically a qualified drop-in replacement. The accessible cross-reference data gives a 173 Mbps rating for DS90CR214MTD without providing the complete target pin and electrical tables. Confirm channel count, data rate, supply voltage, differential thresholds, output timing, and every pin function before treating the substitution as drop-in.
What is the best drop-in replacement for DS90CR212MTD?
No fully verified drop-in replacement is established by the available cross-reference information. DS90CR214MTD and DS90CR562MTD are same-package TI candidates, while DS90CR213MTD is a related family member, but each requires a complete datasheet and pinout comparison before substitution. Treat these as engineering-review candidates rather than automatic replacements, and use the Request a Quote form to discuss availability of the exact target MPN.

엔지니어링 참조 데이터: DS90CR212MTD — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose DS90CR212MTD when the design calls for four LVDS line-receiver functions in a 48-pin TSSOP package and the required channel arrangement is associated with 21-bit Channel Link signaling. Its confirmed commercial range of -10°C to +70°C suits controlled indoor equipment. Evaluate DS90CR214MTD when its documented 173 Mbps rate matches the link, but verify the target's rate and every electrical parameter before substitution. Consider DS90CR562MTD only after checking its documented 18-bit FPD architecture against the 21-bit Channel Link requirement. DS90CR213MTD is a related family candidate, but its channel count, timing, and pin map require confirmation. Because same-package construction does not guarantee pin-to-pin compatibility, use the complete manufacturer datasheet for the final choice, especially for supply voltage, input thresholds, propagation delay, and unused-pin states.

대체품과의 비교

파라미터 이 제품 DS90CR214MTD DS90CR562MTD DS90CR213MTD
Package TSSOP-48 TSSOP-48 - same package class TSSOP-48 - same package class TSSOP-48 - same package class
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments

주요 차별점

  • Four receiver functions in one 48-pin package (vs DS90CR214MTD)
  • Distinct 21-bit Channel Link association (vs DS90CR562MTD)
  • Confirmed commercial environmental classification (vs DS90CR213MTD)

설계 노트

Use the manufacturer's 48-pin TSSOP land pattern and maintain a continuous ground plane beneath the device. Route each differential pair as a tightly coupled pair with matched length where source-to-sink timing matters, and avoid introducing stubs through test pads or layer transitions. Place input and supply bypass components close to their associated pins to minimize loop area and preserve the differential signal's return path.

Do not infer the pin functions from the 48-terminal outline. Obtain the current manufacturer pin-description table and mark every input, output, supply, ground, and reserved terminal directly on the PCB schematic and fabrication data. Pay particular attention to unused receiver inputs, which may require a defined termination state to avoid floating nodes or unintended noise coupling.

Validate the receiver thresholds, input impedance, and timing margin against the actual cable, connector, and PCB channel. Because the accessible product listing does not state the target's maximum data rate or propagation delay, use manufacturer timing data rather than the 173 Mbps figure associated with DS90CR214MTD. Add source-series damping or receiver-side termination only when supported by the complete interface specification.

A matching 48-TSSOP outline does not by itself prove drop-in compatibility. Before replacing DS90CR212MTD with DS90CR214MTD, DS90CR562MTD, or DS90CR213MTD, compare supply voltage, differential input thresholds, receiver-channel count, logic output levels, timing, and every pin assignment. Pay particular attention to the documented 21-bit Channel Link versus 18-bit FPD distinction.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The accessible product and distributor listings do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for the exact MPN. AEC-Q100 qualification is not indicated for this commercial-grade interface IC.

관련 검색

DS90CR212MTD datasheet DS90CR212MTD pinout DS90CR212MTD datasheet pdf DS90CR212MTD specifications DS90CR212MTD price DS90CR212MTD stock DS90CR212MTD equivalent DS90CR212MTD replacement DS90CR212MTD vs DS90CR214MTD DS90CR212MTD TSSOP-48 Texas Instruments DS90CR212MTD DS90CR212MTD LVDS line receiver

관련 부품 & 용어

Texas Instruments DS90CR212MTD DS90CR214MTD DS90CR562MTD DS90CR213MTD LVDS line receiver differential receiver interface IC semiconductor 21-bit Channel Link 18-bit FPD TSSOP-48 TSSOP package family surface-mount technology gull-wing lead quad line receiver differential signaling propagation delay input impedance commercial temperature grade industrial control test and measurement digital backplane
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기