DS90CR212MTD - 48-TSSOP LVDS Line Receiver | TI
MPN: DS90CR212MTD ✓ فعالDS90CR212MTD جائزہ
An LVDS line receiver is an interface IC that detects the voltage difference between two complementary conductors and converts that differential information into a CMOS-compatible logic signal. Within the signal-chain hierarchy, an LVDS receiver belongs to the broader family of differential line receivers, interface ICs, and semiconductor devices. This category is distinct from an LVDS transmitter: the receiver restores valid digital logic at the far end of a cable or board-to-board connection after differential transmission.
The DS90CR212MTD provides four line-receiver channels in one package, reducing component count on multi-channel interface boards. Its rectangular 48-pin TSSOP construction is intended for surface-mount assembly, while the commercial temperature range covers applications operating from -10°C through +70°C. The package body measures 12.5 mm by 6.1 mm according to the product listing, allowing it to be accommodated on boards requiring a higher pin-count interface package rather than a small-outline package.
The DS90CR212MTD is categorized as a specialized interface IC and is specifically described as an LVDS line receiver. Its channel architecture is intended to accept low-amplitude differential signaling, which is commonly used to carry clock or data information over balanced interconnects. The exact signaling rate, input voltage range, supply voltage, output timing, and input impedance must be confirmed from the manufacturer datasheet before a new design relies on those values.
Typical implementation areas include multi-channel digital backplanes, industrial control links, embedded data acquisition, test and measurement systems, and communications equipment that uses balanced interconnects. Consolidating four receivers into one package is particularly useful when a system must terminate or translate several parallel differential signals. Board designers should preserve controlled-impedance routing and provide the decoupling and grounding arrangements recommended for high-speed interface circuits.
The primary layout consideration is the pin density of the 48-terminal TSSOP package. Use the manufacturer pin-description table to assign supply, ground, differential inputs, and logic outputs, and keep unused inputs in their specified termination states. Because no complete pin map is published on the product pages associated with this part, verify each connection against the current Texas Instruments datasheet rather than inferring functions from neighboring pins.
This product record combines package, environmental, interface-classification, and cross-reference information with practical implementation guidance. It also identifies nearby same-package TI line-receiver options for design reviews while clearly separating confirmed attributes from parameters that require datasheet confirmation. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing requirements.
کے لیے ڈراپ اِن متبادل DS90CR212MTD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں DS90CR212MTD (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Product Type, Package, Package Type.
DS90CR214MTD
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
DS90CR562MTD
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DS90CR213MTD
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →DS90CR212MTD تفصیلات
| Product Type | LVDS line receiver IC |
| Receiver Configuration | 4 line receivers |
| Signaling Technology | LVDS differential signaling |
| Associated Interface | 21-bit Channel Link |
| Terminal Count | 48 terminals |
| Package Type | TSSOP-48 |
| Package Shape | Rectangular |
| ماؤنٹنگ اسٹائل | Surface mount |
| Terminal Form | Gull wing |
| Body Length | 12.5 mm |
| Body Width | 6.1 mm |
| آپریٹنگ درجہ حرارت رینج | -10°C to +70°C |
| Temperature Grade | Commercial |
DS90CR212MTD rectangular پن کنفیگریشن گائیڈ
DS90CR212MTD (rectangular پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں DS90CR212MTD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
DS90CR212MTD کے لیے موزوں ہے 6 ایپلیکیشنs: Multi-Channel LVDS Backplane Interfaces, Industrial Control and Data Acquisition, Test and Measurement Equipment, Embedded Communications Equipment, Digital Signal Backplanes, Instrumentation and Sensor Interconnect Boards.
Multi-Channel LVDS Backplane Interfaces
The DS90CR212MTD fits multi-channel LVDS backplane interfaces because it combines four line-receiver functions in one 48-pin TSSOP package. The balanced inputs are intended to recover digital information from differential interconnects, allowing several related clock or data channels to be received through a single component. Its commercial rating of -10°C to +70°C supports equipment deployed in controlled commercial environments. The board must preserve signal integrity with short, impedance-controlled routes, solid ground references, and clean return paths. Before layout release, verify the receiver-channel allocation and every power, ground, and signal pin in the manufacturer datasheet.
تجویز کردہ
Industrial Control and Data Acquisition
The DS90CR212MTD can support industrial control and data-acquisition boards that distribute several low-voltage differential signals between instrument and controller sections. Its four-receiver arrangement reduces the number of separate receiver packages needed on a multi-node measurement interface. The commercial temperature range of -10°C to +70°C matches many indoor production and test environments, although extended-temperature installations require a suitably rated alternative. Keep analog and digital return currents separated, use the recommended supply bypassing, and validate differential thresholds and output timing against the final cable and grounding configuration.
تجویز کردہ
Test and Measurement Equipment
The DS90CR212MTD is appropriate for test and measurement equipment that must receive multiple differential clock, trigger, or control signals from an external fixture. Consolidating four receiver functions into a 48-TSSOP device can simplify routing on densely populated instrument boards while preserving a consistent differential-signaling architecture. Its 12.5 mm by 6.1 mm listed body dimensions require adequate placement and fan-out space within the measurement system. Use short return paths and controlled-impedance interconnects to limit reflections, and confirm receiver latency and output timing before using the device in precision timing paths.
تجویز کردہ
Embedded Communications Equipment
The DS90CR212MTD suits embedded communications equipment requiring balanced receive interfaces for panel links, inter-board connections, or peripheral synchronization. Four LVDS receiver channels in one 48-pin TSSOP package can support compact multi-lane equipment without assigning a separate receiver package to every pair. Its surface-mount gull-wing construction supports automated assembly, while the -10°C to +70°C operating range suits controlled indoor systems. Place input and supply decoupling near the device, preserve the differential pair geometry, and confirm input termination requirements from the manufacturer datasheet for the specific data rate.
تجویز کردہ
Digital Signal Backplanes
The DS90CR212MTD can be evaluated for digital signal backplanes where several differential channels arrive from a connector, mezzanine card, or neighboring processing module. The quad line-receiver configuration supports scalable channel grouping, and the 48-pin TSSOP package provides a defined multi-pin interface footprint. Board-level signal integrity is critical because unequal routing, poor plane transitions, or shared return-current paths can degrade differential signaling. Maintain continuous reference planes, avoid stubs, use matched escape routing from the connector, and confirm the device's propagation-delay and output-timing limits before defining system timing margins.
تجویز کردہ
Instrumentation and Sensor Interconnect Boards
The DS90CR212MTD may be used in instrumentation and sensor-interconnect boards that combine low-level differential signaling with digital control traffic. The receiver's four-channel architecture can consolidate several input pairs while leaving the system with a regular, compact package arrangement. The commercial temperature specification supports typical laboratory and indoor control equipment, but enclosure temperature excursions must remain within -10°C to +70°C. Use careful partitioning between sensitive input routing and switching circuitry, provide local decoupling, and verify all input termination and enable states in the manufacturer datasheet before production release.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا DS90CR212MTD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | DS90CR214MTD | DS90CR562MTD | DS90CR213MTD |
|---|---|---|---|---|
| Package | TSSOP-48 | TSSOP-48 - same package class | TSSOP-48 - same package class | TSSOP-48 - same package class |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
اہم امتیازی خصوصیات
- Four receiver functions in one 48-pin package (بمقابلہDS90CR214MTD)
- Distinct 21-bit Channel Link association (بمقابلہDS90CR562MTD)
- Confirmed commercial environmental classification (بمقابلہDS90CR213MTD)
ڈیزائن نوٹس
Use the manufacturer's 48-pin TSSOP land pattern and maintain a continuous ground plane beneath the device. Route each differential pair as a tightly coupled pair with matched length where source-to-sink timing matters, and avoid introducing stubs through test pads or layer transitions. Place input and supply bypass components close to their associated pins to minimize loop area and preserve the differential signal's return path.
Do not infer the pin functions from the 48-terminal outline. Obtain the current manufacturer pin-description table and mark every input, output, supply, ground, and reserved terminal directly on the PCB schematic and fabrication data. Pay particular attention to unused receiver inputs, which may require a defined termination state to avoid floating nodes or unintended noise coupling.
Validate the receiver thresholds, input impedance, and timing margin against the actual cable, connector, and PCB channel. Because the accessible product listing does not state the target's maximum data rate or propagation delay, use manufacturer timing data rather than the 173 Mbps figure associated with DS90CR214MTD. Add source-series damping or receiver-side termination only when supported by the complete interface specification.
A matching 48-TSSOP outline does not by itself prove drop-in compatibility. Before replacing DS90CR212MTD with DS90CR214MTD, DS90CR562MTD, or DS90CR213MTD, compare supply voltage, differential input thresholds, receiver-channel count, logic output levels, timing, and every pin assignment. Pay particular attention to the documented 21-bit Channel Link versus 18-bit FPD distinction.
تعمیل کی معلومات
The accessible product and distributor listings do not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for the exact MPN. AEC-Q100 qualification is not indicated for this commercial-grade interface IC.