EP1M350F780C7ES - 486-I/O Mercury FPGA | Intel
부품 번호: EP1M350F780C7ES ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
EP1M350F780C7ES 개요
An FPGA, or Field Programmable Gate Array, is a semiconductor device containing programmable logic, routing resources, memory, and configurable I/O. Its hierarchy extends from configurable logic blocks to programmable logic devices, integrated circuits, and programmable digital hardware. Unlike a fixed-function ASIC, an FPGA can be configured after manufacturing. FPGAs are widely used for communication interfaces, digital signal processing, protocol bridging, test equipment, and embedded control because designers can modify functionality without respinning application-specific silicon.
Key verified characteristics include 486 user I/O pins, 780 total package pins, a 1.8 V supply voltage, CMOS logic, and a commercial operating-temperature range of 0 C to 85 C. The device family description also states that any 8 channels can operate at 1.25 Gbps, while the other 10 channels must operate at 1.0 Gbps or less. These figures make the device relevant to high-throughput serial links and systems combining several fast channels with slower peripheral or memory interfaces.
The Mercury architecture integrates programmable logic with high-speed transceivers and clock-data recovery. Clock-data recovery extracts clock information from incoming serial data, allowing the FPGA to receive high-speed streams without transmitting a separate clock. The combined programmable fabric, transceiver resources, and 486 user I/O enable a system to implement packet processing, stream aggregation, format conversion, and control logic in one device. Exact logic-element count, transceiver count, embedded-memory capacity, and timing grades are not present in the verified web data and therefore require datasheet verification.
Typical applications include communication-interface equipment, digital signal processing, embedded protocol conversion, test and measurement hardware, and high-speed data aggregation. The 780-BGA package is appropriate for dense, high-pin-count systems, but it requires controlled impedance, careful power distribution, and thermal-aware PCB design. The 486 user I/O count provides broad connection flexibility, while the transceiver capability supports applications where serial throughput and deterministic data capture are important.
Designers should verify the complete pinout, bank voltage rules, transceiver reference-clock requirements, configuration interface, decoupling network, and supported I/O standards against the manufacturer datasheet before layout release. The verified data does not establish the exact transceiver count, logic-element count, package dimensions, thermal resistance, or compliance status. No safe operating-area chart is applicable because this is a digital FPGA, not a power semiconductor.
This page consolidates the verified electrical, package, temperature, and sourcing information for EP1M350F780C7ES with clearly marked data gaps, application guidance, and drop-in-analysis boundaries. Distributor inventory and pricing require direct confirmation because the retrieved data contains no XAIPART price schedule and one distributor stock statement was updated on February 25, 2026.
드롭인 대체품: EP1M350F780C7ES — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1M350F780C7ES (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Family, Architecture, Configuration Interface.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1M350F780C7
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$162 / 개
데이터시트 보기 →EP1M350F780C5ES
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$142 / 개
데이터시트 보기 →EP1M350F780C6
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$905 / 개
데이터시트 보기 →EP1M350F780C6N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$219.4 / 개
데이터시트 보기 →EP1M350B780C7
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$92 / 개
데이터시트 보기 →EP1M350F780C7ES 최대 정격 & 전기적 특성
| Product Type | Field Programmable Gate Array (FPGA) |
| Logic Family | CMOS |
| User I/O Count | 486 pins |
| Total Package Pins | 780 pins |
| Package Type | FINE LINE BGA-780 |
| Package Category | 780-BBGA |
| 공급 전압 | 1.8 V |
| Maximum Stated Transceiver Data Rate | 1.25 Gbps |
| Channels Supported at 1.25 Gbps | 8 channels |
| Remaining Channel Limit | 10 channels at 1.0 Gbps or less |
| 동작 온도 | 0 C to 85 C |
| Clock Data Recovery | Supported |
| High-Speed Transceivers | Integrated |
| 실장 유형 | Surface Mount |
| RoHS 상태 | unknown |
| REACH Status | unknown |
EP1M350F780C7ES 780-bbga 핀 구성 가이드
EP1M350F780C7ES(780-bbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1M350F780C7ES.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1M350F780C7ES 적합 용도: 6 애플리케이션s: High-Speed Communication Interface, Digital Signal Processing Platform, Embedded Protocol Bridge, Test and Measurement Instrument, Industrial Control and Automation, High-Density Data Aggregation.
High-Speed Communication Interface
EP1M350F780C7ES fits communication-interface equipment that needs programmable logic alongside high-speed serial channels. The verified device data identifies integrated high-speed transceivers, clock-data recovery, 486 user I/O, and support for 1.25 Gbps on any 8 channels. A designer can use the FPGA to implement protocol framing, channel aggregation, buffering, error monitoring, and control while preserving a large general-purpose I/O budget. The 780-pin FINE LINE BGA package supports dense board integration, but exact lane placement, reference-clock requirements, and transceiver electrical limits must be taken from the manufacturer datasheet. Because the verified data does not state the total transceiver count or full timing numbers, the part is best selected after confirming those resources against the intended link topology.
추천
Digital Signal Processing Platform
EP1M350F780C7ES can serve as the programmable processing and I/O hub in a digital signal processing platform. Its 486 user I/O pins allow sensor, converter, memory, and control interfaces to be consolidated around configurable logic, while the integrated transceiver resources support high-rate data movement when required. The verified 1.8 V supply and CMOS implementation make it appropriate for a board designed around a low-voltage digital power tree. The device can implement filters, packet handling, stream conversion, timing logic, and data-format adaptation, but exact DSP resources and performance are not included in the supplied data. Engineers should confirm logic-element capacity, embedded-memory limits, clocking architecture, and supported development-tool flow before committing the FPGA to a signal-processing design.
추천
Embedded Protocol Bridge
EP1M350F780C7ES is well suited to embedded protocol bridging because programmable logic can translate streams between different interfaces and protocols. The 486 user I/O count provides flexibility for parallel buses, status signals, clocks, and control paths, while the high-speed transceiver capability can carry serialized traffic. A practical implementation could receive a serial stream, perform buffering and packet processing, and expose converted data to a host processor or peripheral subsystem. The verified data states that any 8 channels can support 1.25 Gbps and the other 10 channels must operate at 1.0 Gbps or less. Those limits help bound the link architecture, but protocol support, lane configuration, and timing closure still require exact datasheet and tool validation.
추천
Test and Measurement Instrument
EP1M350F780C7ES can be used in test and measurement hardware that needs simultaneous capture, generation, formatting, and analysis of digital data. The 486 user I/O pins allow the FPGA to connect to measurement front ends, timing circuits, memory devices, and host interfaces, while the integrated clock-data recovery supports serialized acquisition paths. Its programmable fabric can implement counters, trigger logic, protocol decoding, correlation, and data packing around the acquisition system. The verified 780-pin BGA package is compact relative to the number of connections, but the 0 C to 85 C operating range and the unspecified thermal resistance must be considered during chassis and airflow design. Exact I/O standards, logic resources, and measurement timing performance are not available in the verified web data.
추천
Industrial Control and Automation
EP1M350F780C7ES is appropriate for industrial control equipment that combines deterministic logic with many external connections. The 486 user I/O count can accommodate encoders, actuator controls, status inputs, communication interfaces, and timing signals, while the FPGA fabric can implement state machines, synchronization, and real-time protocol handling. The integrated high-speed transceivers and clock-data recovery are useful when the controller must exchange high-rate data with another subsystem. The commercial 0 C to 85 C operating range supports typical indoor industrial environments, but environmental qualification, vibration, conformal coating, and extended-temperature requirements must be assessed separately. Exact package pinout, bank voltage restrictions, and configuration details are required before designing the industrial controller.
추천
High-Density Data Aggregation
EP1M350F780C7ES can aggregate multiple data sources into a higher-level processing or storage subsystem. The device family data states that any 8 channels can operate at 1.25 Gbps, while the other 10 channels must operate at 1.0 Gbps or less. This structure is useful for systems that combine several fast serial streams with lower-rate interfaces and then perform packetization, filtering, buffering, or time-domain processing in programmable logic. The 780-pin BGA package and 486 user I/O provide connection density for multi-channel boards. Successful implementation depends on careful channel assignment, reference-clock design, signal-integrity analysis, and confirmation of the exact number and capabilities of transceiver channels. Those parameters are not fully specified in the retrieved source.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1M350F780C7ES — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1M350F780C7 | EP1M350F780C5ES | EP1M350F780C6 | EP1M350F780C6N | EP1M350B780C7 |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 780-pin FINE LINE BGA | 780-pin FINE LINE BGA | 780-pin BGA | 780-pin BGA | 780-pin BGA | 780-pin BGA |
| Product Type | FPGA | FPGA | FPGA | FPGA | FPGA | FPGA |
주요 차별점
- Integrated high-speed serial capability (vs EP1M350B780C7)
- High user-I/O density (vs EP1M350F780C7)
- Verified channel-rate envelope (vs EP1M350F780C5ES)
- Commercial temperature range (vs EP1M350F780C6N)
설계 노트
Treat EP1M350F780C7ES as a fine-pitch 780-pin BGA design rather than a conventional perimeter-I/O FPGA. The verified source identifies FINE LINE BGA-780 but does not provide ball dimensions, pitch, stack-up recommendations, or escape geometry. Use the manufacturer package drawing as the controlling document, preserve a continuous reference plane, and calculate escape routing and via capacity from the exact land pattern. Do not begin production layout from a generic 780-BGA symbol.
The verified device entry specifies a 1.8 V supply, but a complete FPGA power design requires more than one rail and controlled sequencing. Confirm core, I/O-bank, transceiver, auxiliary, and configuration-rail limits from the datasheet before selecting regulators. Place local decoupling adjacent to the relevant power-entry and transceiver areas, minimize shared impedance, and verify startup and shutdown sequencing. The supplied data does not include regulator-current values, current transients, or power-consumption limits, so those values must not be inferred.
The transceiver feature set makes channel placement and reference-clock quality central to reliable operation. The verified data states that any 8 channels can support 1.25 Gbps and the other 10 channels must operate at 1.0 Gbps or less. Route high-speed pairs over an uninterrupted reference plane with controlled impedance, minimize stubs and layer changes, and follow the datasheet rules for differential-pair spacing and connector breaks. Confirm the actual lane count, transmitter and receiver limits, clock requirements, and allowable channel loss before freezing the design.
FPGA junction temperature depends on configuration activity, logic utilization, toggle rates, transceiver traffic, supply voltage, airflow, and board construction. The verified source gives a 0 C to 85 C operating range but does not provide thermal resistance, power limits, or airflow requirements. Estimate power only after selecting a representative configuration, then verify it with the manufacturer power-estimation workflow and bench measurements. Keep the BGA and surrounding voltage-regulator area free of unintended thermal bottlenecks and provide an airflow strategy appropriate to the final system.
Do not infer interchangeability from the EP1M350 family name, a 780-pin package description, or a similar speed suffix. The exact ordering code can affect speed grade, temperature grade, transceiver options, configuration, or other device characteristics that are not present in the retrieved data. Before using a same-family part, compare the complete manufacturer ordering table, pin mapping, voltage limits, package drawing, transceiver resources, development-tool support, and required bitstream or license compatibility. If any item differs, treat the candidate as a new design rather than a drop-in replacement.
규정 준수 정보
The verified source data does not provide RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 information. No compliance claim is inferred from the FPGA category or Intel brand.
