EPM5128LC-1 - 128-Macrocell MAX 5000 CPLD | Altera | 5V 68-Pin PLCC
부품 번호: EPM5128LC-1 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $15.75 | $157.50 |
| 100 | $12.4 | $1,240.00 |
| 500 | $9.85 | $4,925.00 |
| 1,000 | $8.2 | $8,200.00 |
EPM5128LC-1 개요
A Complex Programmable Logic Device (CPLD) is a non-volatile, electrically programmable logic IC that integrates multiple PAL/GAL-like macrocell arrays onto a single die with a global interconnect matrix. Within the broader hierarchy, the EPM5128LC-1 sits as: CPLD -> programmable logic device -> logic IC -> semiconductor IC. CPLDs are favored over discrete TTL/CMOS glue logic because they offer deterministic timing, lower board area, lower power, and field re-programmability, while remaining far simpler to use than FPGA & CPLD-class SRAM-based FPGAs.
Key features include 128 macrocells, 52 user I/O pins, 7 dedicated input pins, an internal tpd of 30 ns, and an industry-standard 4-pin JTAG (IEEE 1149.1) interface for in-system boundary-scan testing and ISP. The device is offered in the LC package suffix - a windowed ceramic J-lead PLCC that supports UV erasure and re-programming, which makes the LC variant especially valuable for prototyping, design iteration, and low-volume engineering builds.
Typical applications include address decoding for 8/16-bit microprocessor and microcontroller systems, bus-interface glue logic between legacy peripherals, board-level control sequencers, and retrocomputing or industrial controller logic. The wide 5V operating range and CMOS input thresholds make the EPM5128LC-1 compatible with TTL and CMOS logic families used in 1980s-1990s designs. When designing with this device, verify JTAG chain order against other boundary-scan devices and note that Altera legacy MAX 5000 software support requires MAX+PLUS II or Quartus in legacy compatibility mode.
드롭인 대체품: EPM5128LC-1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM5128LC-1 (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Process Technology, Device Type, Package, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM5128LC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
EPM5128JC
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →EPM5128JC-1
✅ 드롭인✓ 재고 있음
$24.95 / 개
데이터시트 보기 →EPM5128JC-2
✅ 드롭인✓ 재고 있음
$21.75 / 개
데이터시트 보기 →EPM5128GM/883B
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.1 / 개
데이터시트 보기 →EPM5128LC-1 최대 정격 & 전기적 특성
| Family | MAX 5000 |
| Logic Elements / Macrocells | 128 macrocells |
| Dedicated Inputs | 7 |
| Bidirectional I/O Pins | 52 |
| Total User I/O | 60 (max) |
| Propagation Delay (tpd) | 30 ns |
| Supply Voltage (VCC) | 5 V (±10%) |
| Process Technology | CMOS EPROM, UV-erasable |
| Programmability | UV-erasable / OTP (windowed package) |
| Package Type | 68-pin J-lead ceramic chip carrier (PLCC windowed) |
| 동작 온도 | 0C to +70C (commercial) |
| JTAG Support | IEEE 1149.1 boundary-scan |
| 실장 유형 | Surface Mount (J-lead PLCC socket compatible) |
EPM5128LC-1 핀 구성
| 핀 1 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 2 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 3 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 4 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 5 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 6 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 7 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 8 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 9 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 10 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 11 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 12 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 13 | GND — Ground |
| 핀 14 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 15 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 16 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 17 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 18 | INPUT — Dedicated input |
| 핀 19 | INPUT — Dedicated input |
| 핀 20 | INPUT — Dedicated input |
| 핀 21 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 22 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 23 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 24 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 25 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 26 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 27 | GND — Ground |
| 핀 28 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 29 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 30 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 31 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 32 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 33 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 34 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 35 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 36 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 37 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 38 | VCC — 5V supply |
| 핀 39 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 40 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 41 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 42 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 43 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 44 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 45 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 46 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 47 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 48 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 49 | GND — Ground |
| 핀 50 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 51 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 52 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 53 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 54 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 55 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 56 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 57 | INPUT — Dedicated input |
| 핀 58 | INPUT — Dedicated input |
| 핀 59 | INPUT — Dedicated input |
| 핀 60 | INPUT — Dedicated input |
| 핀 61 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 62 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 63 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 64 | I/O — Bidirectional I/O pin (macrocell) |
| 핀 65 | TDI — JTAG Test Data In |
| 핀 66 | TMS — JTAG Test Mode Select |
| 핀 67 | TCK — JTAG Test Clock |
| 핀 68 | TDO — JTAG Test Data Out |
일반적인 애플리케이션
EPM5128LC-1 적합 용도: 6 애플리케이션s: Microprocessor Address Decoding, Board-Level Glue Logic Consolidation, Industrial Controller State Machines, Retrocomputing and Hardware Preservation, Test and Measurement JTAG Tap Controllers, Legacy Peripheral Bus Bridges.
Microprocessor Address Decoding
The EPM5128LC-1 is well suited to 8/16-bit microprocessor address decoding and chip-select generation, where its 128 macrocells comfortably express large AND-OR decode trees for memory and peripheral maps. The 30 ns tpd places the device comfortably between 386/486 and 68000-class CPU clock edges, while 5V TTL-compatible I/O thresholds match the bus transceivers, latches, and peripheral ASICs of the era. Used with companion logic buffers, it can replace 4-6 conventional 22V10 PALs or many discrete 74LS138/139 gates on a single socket. Source: typical MAX 5000 application examples.
추천
Board-Level Glue Logic Consolidation
Designers use the EPM5128LC-1 to consolidate scattered 74LS/74HC glue logic on legacy ISA, VME, and STD-bus cards into a single programmable device. The 52 user I/O pins comfortably absorb address-latch, wait-state, interrupt-priority, and bus-arbiter functions that would otherwise require 8-12 discrete packages. Deterministic 30 ns propagation simplifies worst-case timing closure, while 5V tolerance removes level-shifting concerns when interfacing to legacy peripherals. The UV windowed package supports design iteration during prototyping, and JTAG boundary-scan provides testability for production.
추천
Industrial Controller State Machines
The EPM5128LC-1 fits legacy industrial controllers requiring deterministic Moore/Mealy state machines for sequencer, batch-process, and machine-tool control logic. Its EPROM-based macrocell fabric is non-volatile and immune to configuration corruption in electrically noisy factory environments, unlike SRAM-based FPGAs. The 52 I/O pins can drive relays, opto-isolators, and 24V industrial buses through external buffers, while the commercial 0-70C temperature range matches most indoor control cabinets. Source: Altera MAX 5000 industrial application notes.
추천
Retrocomputing and Hardware Preservation
Retrocomputing hobbyists and museum restoration projects use the EPM5128LC-1 to re-create or replace lost logic boards for vintage computers, arcade systems, and synthesizer hardware where original PALs are unobtainable. Its 128 logic elements comfortably emulate multiple 22V10-style PALs in a single chip, and the UV-erasable window allows the same physical device to be re-targeted as schematics evolve. 5V TTL compatibility and 30 ns delays match the timing margins of 1980s-era designs without surprises.
추천
Test and Measurement JTAG Tap Controllers
The EPM5128LC-1 is used to implement JTAG tap controllers and boundary-scan infrastructure on legacy test fixtures and bed-of-nails in-circuit test (ICT) systems. Its built-in IEEE 1149.1 TAP pins (TDI, TDO, TMS, TCK) and programmable I/O macrocells allow engineers to build custom scan chains that interleave with vendor-specific test access ports. The deterministic 30 ns timing keeps scan-clock alignment tight across multi-device scan paths, and the EPROM non-volatility means test programs survive power cycles in production test cells.
추천
Legacy Peripheral Bus Bridges
The EPM5128LC-1 serves as a bus-bridge glue layer between legacy peripherals (such as SCSI, GPIB, parallel ATA, or VMEbus mezzanines) and modern host controllers. Its 52 user I/O lines are sufficient to implement FIFO flag logic, address decoding, and timing-state generation for 8/16-bit bus protocols, while 5V I/O tolerance allows direct interface to 1990s-era peripherals without level translation. JTAG support simplifies in-system bring-up of custom bridge firmware.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM5128LC-1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM5128LC | EPM5128JC | EPM5128JC-1 | EPM5128JC-2 | EPM5128GM/883B |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel FPGA) | Altera (Intel FPGA) - same | Altera (Intel FPGA) - same | Altera (Intel FPGA) - same | Altera (Intel FPGA) - same | Altera (Intel FPGA) - same |
| Package | 68-pin J-lead ceramic chip carrier (PLCC windowed) | 68-pin J-lead ceramic PLCC (windowed) - same | 68-pin J-lead PLCC (plastic, OTP) - same footprint | 68-pin J-lead PLCC (plastic, OTP) - same footprint | 68-pin J-lead PLCC (plastic, OTP) - same footprint | 68-pin ceramic DIP (different package, requires PCB rework) |
| Macrocells | 128 | 128 | 128 | 128 | 128 | 128 |
| Bidirectional I/O | 52 | 52 | 52 | 52 | 52 | 52 |
| Dedicated Inputs | 7 | 7 | 7 | 7 | 7 | 7 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Speed Grade (tpd) | 30 ns (-1) | Default speed grade | Default speed grade | 30 ns (-1) | (-2) speed grade | Default speed grade |
| Programmability | UV-erasable (windowed) | UV-erasable (windowed) | OTP (no UV window) | OTP (no UV window) | OTP (no UV window) | UV-erasable or OTP (ceramic) |
| Operating Temperature | 0C to +70C (commercial) | 0C to +70C | 0C to +70C | 0C to +70C | 0C to +70C | -55C to +125C (MIL-STD-883) |
주요 차별점
- UV-erasable windowed ceramic package enables design iteration (vs EPM5128JC)
- Specified -1 speed grade for deterministic 30 ns timing closure (vs EPM5128LC)
- Commercial temperature range suited to indoor industrial control (vs EPM5128GM/883B)
설계 노트
The EPM5128LC-1 is obsolete and no longer orderable through authorized channels. Designers using it for new designs risk long-term supply disruption; consider migrating to MAX II/MAX V/MAX 10 CPLDs or Xilinx XC9500XL equivalents for new projects. Always source from brokers with full date-code and lot-trace documentation, and verify ESD handling procedures for UV-windowed ceramic packages which can be sensitive to static discharge during erase cycles. Source: Altera MAX 5000 family datasheet and Octopart lifecycle data 2026-09-12.
The 68-pin J-lead PLCC windowed ceramic package requires a through-hole PLCC socket (e.g., 68-pin PGA-style or surface-mount adapter) on the PCB. Decouple VCC (pin 38) with a 100 nF ceramic capacitor placed within 5 mm of the supply pin and a bulk 10 µF tantalum on the same net. GND pins (13, 27, 49) should connect to a low-impedance ground plane; multiple GND pins reduce lead inductance. Keep JTAG trace lengths under 100 mm to preserve signal integrity on TMS, TCK, TDI, and TDO.
MAX 5000 outputs have TTL-compatible drive strength (~24 mA IOL/IOH). For high-speed buses, avoid running I/O traces parallel to clock signals and provide a ground return path within 3x the trace-spacing rule. JTAG chain integrity depends on TCK duty cycle; if the device sits in a chain with faster JTAG devices, place the EPM5128LC-1 close to the TDO driver and avoid stub traces. Estimated: with 30 ns tpd and 52 outputs, simultaneous-switching output (SSO) noise on a shared ground plane may add up to 0.5 ns additional propagation delay.
규정 준수 정보
EPM5128LC-1 is a legacy Altera (now Intel FPGA) part from the 1990s MAX 5000 family. Compliance data was not present in the verified web data; markers set to unknown. The lead-containing windowed ceramic package is non-RoHS by modern definitions. For new designs requiring RoHS/REACH, choose a modern MAX II/MAX V/MAX 10 CPLD instead.
