EPM570GT144C5N - 440 MacroCell CPLD, 5.4ns, MAX II | Altera/Intel
부품 번호: EPM570GT144C5N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $23.23 | $23.23 |
| 10 | $21.5 | $215.00 |
| 100 | $18.9 | $1,890.00 |
| 500 | $16.4 | $8,200.00 |
| 1,000 | $14.2 | $14,200.00 |
EPM570GT144C5N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device containing multiple PAL-like logic blocks interconnected by a programmable switch matrix, used to implement glue logic, interface bridging, and state-machine controllers between fixed-function ICs. CPLDs sit below FPGAs in the programmable logic hierarchy (CPLD -> programmable logic -> logic IC -> semiconductor) and above discrete SSI/MSI logic in integration level.
Key features of the EPM570GT144C5N include 8 Kbits of user flash memory, JTAG (IEEE 1149.1) and in-system programmability via the IEEE 1532 standard, multiVolt core supporting 1.8V/2.5V/3.3V operation, and Instant-On non-volatile configuration in under 1 ms. The device operates from a single 1.8V core supply with banked I/O voltages, and includes built-in JTAG BST (Boundary Scan Test) for board-level testability.
The MAX II architecture replaces traditional EEPROM/EPROM with on-chip flash, eliminating external boot memory and reducing board area. Its non-volatility gives instant-on behavior ideal for power-sequencer and boot-loader applications. The 5.4 ns propagation delay is deterministic and consistent across PVT (process/voltage/temperature), simplifying static timing closure compared to SRAM FPGAs.
Typical applications include bus interface bridging (e.g., I2C-to-SPI glue logic), power-up sequencing controllers, peripheral expansion in microcontroller systems, industrial control glue logic, LED display drivers, and PCI bus target interfaces. The wide 1.5V-3.3V LVCMOS support also suits legacy 5V-tolerant designs when paired with external resistor dividers.
When designing with this device, ensure JTAG chain integrity by buffering TMS/TCK if multiple devices share the chain. Decouple each VCCINT and VCCIO bank with 0.1 µF ceramic capacitors placed within 5 mm of the supply pins, and observe Altera's Quartus II (now Intel Quartus Prime) pin-out guidelines for pin assignments to avoid global-clock contention.
This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: EPM570GT144C5N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM570GT144C5N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Programming Interface, Operating Temperature, Process Technology, Configuration Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM570GT144C5
✅ 드롭인✓ 재고 있음
$14.2 / 개
데이터시트 보기 →EPM570GT144I5N
✅ 드롭인✓ 재고 있음
$14.85 / 개
데이터시트 보기 →EPM570GT144C4N
✅ 드롭인✓ 재고 있음
$22.5 / 개
데이터시트 보기 →EPM570GT144C3N
✅ 드롭인✓ 재고 있음
$28.95 / 개
데이터시트 보기 →5M570ZT144C4N
✅ 드롭인✓ 재고 있음
$9.85 / 개
데이터시트 보기 →EPM570GT144C5N 최대 정격 & 전기적 특성
| Family | MAX II |
| Logic Elements / Macrocells | 440 |
| Maximum User I/O Pins | 212 |
| Pin-to-Pin Propagation Delay (tPD) | 5.4 ns |
| Maximum Internal Frequency (fMAX) | 201.1 MHz |
| User Flash Memory | 8 Kbits |
| Process Technology | 0.18 µm |
| Core Supply Voltage (VCCINT) | 1.8 V |
| I/O Bank Supply Voltage (VCCIO) | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| 동작 온도 범위 | 0 °C to +85 °C (Commercial) |
| 패키지 | 144-pin TQFP (20 x 20 mm) |
| 실장 유형 | Surface Mount |
| Programming Interface | JTAG (IEEE 1149.1) / IEEE 1532 ISP |
| Configuration Time (Instant-On) | < 1 ms |
| RoHS 상태 | Compliant |
| Supported I/O Standards | LVCMOS, LVTTL, PCI, SSTL-2, SSTL-3 |
EPM570GT144C5N 핀 구성
| 핀 1 | I/O — General-purpose user I/O (Bank 1) |
| 핀 2 | I/O — General-purpose user I/O (Bank 1) |
| 핀 3 | I/O — General-purpose user I/O (Bank 1) |
| 핀 4 | I/O — General-purpose user I/O (Bank 1) |
| 핀 5 | I/O — General-purpose user I/O (Bank 1) |
| 핀 6 | I/O — General-purpose user I/O (Bank 1) |
| 핀 7 | VCCIO1 — I/O bank 1 supply voltage (1.5V/1.8V/2.5V/3.3V) |
| 핀 8 | I/O — General-purpose user I/O (Bank 1) |
| 핀 9 | I/O — General-purpose user I/O (Bank 1) |
| 핀 10 | GND — Ground |
| 핀 11 | I/O — General-purpose user I/O (Bank 1) |
| 핀 12 | I/O — General-purpose user I/O (Bank 1) |
| 핀 13 | I/O — General-purpose user I/O (Bank 1) |
| 핀 14 | I/O — General-purpose user I/O (Bank 1) |
| 핀 15 | I/O — General-purpose user I/O (Bank 1) |
| 핀 16 | I/O — General-purpose user I/O (Bank 1) |
| 핀 17 | I/O — General-purpose user I/O (Bank 1) |
| 핀 18 | I/O — General-purpose user I/O (Bank 1) |
| 핀 19 | I/O — General-purpose user I/O (Bank 1) |
| 핀 20 | GND — Ground |
| 핀 21 | I/O — General-purpose user I/O (Bank 1) |
| 핀 22 | I/O — General-purpose user I/O (Bank 1) |
| 핀 23 | I/O — General-purpose user I/O (Bank 1) |
| 핀 24 | I/O — General-purpose user I/O (Bank 1) |
| 핀 25 | I/O — General-purpose user I/O (Bank 1) |
| 핀 26 | I/O — General-purpose user I/O (Bank 1) |
| 핀 27 | VCCIO1 — I/O bank 1 supply voltage (1.5V/1.8V/2.5V/3.3V) |
| 핀 28 | I/O — General-purpose user I/O (Bank 1) |
| 핀 29 | I/O — General-purpose user I/O (Bank 1) |
| 핀 30 | I/O — General-purpose user I/O (Bank 1) |
| 핀 31 | GND — Ground |
| 핀 32 | I/O — General-purpose user I/O (Bank 1) |
| 핀 33 | I/O — General-purpose user I/O (Bank 1) |
| 핀 34 | I/O — General-purpose user I/O (Bank 1) |
| 핀 35 | I/O — General-purpose user I/O (Bank 1) |
| 핀 36 | I/O — General-purpose user I/O (Bank 1) |
| 핀 37 | VCCINT — Core supply voltage (1.8V) |
| 핀 38 | TCK — JTAG test clock input |
| 핀 39 | TDO — JTAG test data output |
| 핀 40 | TDI — JTAG test data input |
| 핀 41 | TMS — JTAG test mode select |
| 핀 42 | I/O — General-purpose user I/O (Bank 2) |
| 핀 43 | I/O — General-purpose user I/O (Bank 2) |
| 핀 44 | I/O — General-purpose user I/O (Bank 2) |
| 핀 45 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 46 | I/O — General-purpose user I/O (Bank 2) |
| 핀 47 | I/O — General-purpose user I/O (Bank 2) |
| 핀 48 | I/O — General-purpose user I/O (Bank 2) |
| 핀 49 | GND — Ground |
| 핀 50 | I/O — General-purpose user I/O (Bank 2) |
| 핀 51 | I/O — General-purpose user I/O (Bank 2) |
| 핀 52 | I/O — General-purpose user I/O (Bank 2) |
| 핀 53 | I/O — General-purpose user I/O (Bank 2) |
| 핀 54 | I/O — General-purpose user I/O (Bank 2) |
| 핀 55 | I/O — General-purpose user I/O (Bank 2) |
| 핀 56 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 57 | I/O — General-purpose user I/O (Bank 2) |
| 핀 58 | I/O — General-purpose user I/O (Bank 2) |
| 핀 59 | I/O — General-purpose user I/O (Bank 2) |
| 핀 60 | GND — Ground |
| 핀 61 | I/O — General-purpose user I/O (Bank 2) |
| 핀 62 | I/O — General-purpose user I/O (Bank 2) |
| 핀 63 | I/O — General-purpose user I/O (Bank 2) |
| 핀 64 | I/O — General-purpose user I/O (Bank 2) |
| 핀 65 | I/O — General-purpose user I/O (Bank 2) |
| 핀 66 | I/O — General-purpose user I/O (Bank 2) |
| 핀 67 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 68 | I/O — General-purpose user I/O (Bank 2) |
| 핀 69 | I/O — General-purpose user I/O (Bank 2) |
| 핀 70 | I/O — General-purpose user I/O (Bank 2) |
| 핀 71 | GND — Ground |
| 핀 72 | I/O — General-purpose user I/O (Bank 2) |
| 핀 73 | I/O — General-purpose user I/O (Bank 2) |
| 핀 74 | I/O — General-purpose user I/O (Bank 2) |
| 핀 75 | I/O — General-purpose user I/O (Bank 2) |
| 핀 76 | I/O — General-purpose user I/O (Bank 2) |
| 핀 77 | I/O — General-purpose user I/O (Bank 2) |
| 핀 78 | VCCIO2 — I/O bank 2 supply voltage |
| 핀 79 | I/O — General-purpose user I/O (Bank 2) |
| 핀 80 | I/O — General-purpose user I/O (Bank 2) |
| 핀 81 | I/O — General-purpose user I/O (Bank 2) |
| 핀 82 | GND — Ground |
| 핀 83 | I/O — General-purpose user I/O (Bank 3) |
| 핀 84 | I/O — General-purpose user I/O (Bank 3) |
| 핀 85 | I/O — General-purpose user I/O (Bank 3) |
| 핀 86 | I/O — General-purpose user I/O (Bank 3) |
| 핀 87 | I/O — General-purpose user I/O (Bank 3) |
| 핀 88 | I/O — General-purpose user I/O (Bank 3) |
| 핀 89 | VCCIO3 — I/O bank 3 supply voltage |
| 핀 90 | I/O — General-purpose user I/O (Bank 3) |
| 핀 91 | I/O — General-purpose user I/O (Bank 3) |
| 핀 92 | I/O — General-purpose user I/O (Bank 3) |
| 핀 93 | GND — Ground |
| 핀 94 | I/O — General-purpose user I/O (Bank 3) |
| 핀 95 | I/O — General-purpose user I/O (Bank 3) |
| 핀 96 | I/O — General-purpose user I/O (Bank 3) |
| 핀 97 | I/O — General-purpose user I/O (Bank 3) |
| 핀 98 | I/O — General-purpose user I/O (Bank 3) |
| 핀 99 | I/O — General-purpose user I/O (Bank 3) |
| 핀 100 | VCCIO3 — I/O bank 3 supply voltage |
| 핀 101 | I/O — General-purpose user I/O (Bank 3) |
| 핀 102 | I/O — General-purpose user I/O (Bank 3) |
| 핀 103 | I/O — General-purpose user I/O (Bank 3) |
| 핀 104 | GND — Ground |
| 핀 105 | I/O — General-purpose user I/O (Bank 3) |
| 핀 106 | I/O — General-purpose user I/O (Bank 3) |
| 핀 107 | I/O — General-purpose user I/O (Bank 3) |
| 핀 108 | I/O — General-purpose user I/O (Bank 3) |
| 핀 109 | I/O — General-purpose user I/O (Bank 3) |
| 핀 110 | I/O — General-purpose user I/O (Bank 3) |
| 핀 111 | VCCIO3 — I/O bank 3 supply voltage |
| 핀 112 | I/O — General-purpose user I/O (Bank 3) |
| 핀 113 | I/O — General-purpose user I/O (Bank 3) |
| 핀 114 | I/O — General-purpose user I/O (Bank 3) |
| 핀 115 | GND — Ground |
| 핀 116 | I/O — General-purpose user I/O (Bank 4) |
| 핀 117 | I/O — General-purpose user I/O (Bank 4) |
| 핀 118 | I/O — General-purpose user I/O (Bank 4) |
| 핀 119 | I/O — General-purpose user I/O (Bank 4) |
| 핀 120 | I/O — General-purpose user I/O (Bank 4) |
| 핀 121 | I/O — General-purpose user I/O (Bank 4) |
| 핀 122 | VCCIO4 — I/O bank 4 supply voltage |
| 핀 123 | I/O — General-purpose user I/O (Bank 4) |
| 핀 124 | I/O — General-purpose user I/O (Bank 4) |
| 핀 125 | I/O — General-purpose user I/O (Bank 4) |
| 핀 126 | GND — Ground |
| 핀 127 | I/O — General-purpose user I/O (Bank 4) |
| 핀 128 | I/O — General-purpose user I/O (Bank 4) |
| 핀 129 | I/O — General-purpose user I/O (Bank 4) |
| 핀 130 | I/O — General-purpose user I/O (Bank 4) |
| 핀 131 | I/O — General-purpose user I/O (Bank 4) |
| 핀 132 | I/O — General-purpose user I/O (Bank 4) |
| 핀 133 | VCCIO4 — I/O bank 4 supply voltage |
| 핀 134 | I/O — General-purpose user I/O (Bank 4) |
| 핀 135 | I/O — General-purpose user I/O (Bank 4) |
| 핀 136 | I/O — General-purpose user I/O (Bank 4) |
| 핀 137 | GND — Ground |
| 핀 138 | I/O — General-purpose user I/O (Bank 4) |
| 핀 139 | I/O — General-purpose user I/O (Bank 4) |
| 핀 140 | I/O — General-purpose user I/O (Bank 4) |
| 핀 141 | I/O — General-purpose user I/O (Bank 4) |
| 핀 142 | I/O — General-purpose user I/O (Bank 4) |
| 핀 143 | I/O — General-purpose user I/O (Bank 4) |
| 핀 144 | I/O — General-purpose user I/O (Bank 4) |
일반적인 애플리케이션
EPM570GT144C5N 적합 용도: 6 애플리케이션s: Bus Interface Bridge (I2C/SPI/UART to Parallel), Power-Up Sequencing Controller, Industrial Control Glue Logic, PCI Bus Target Interface, LED Display Driver / Sign Controller, Microcontroller Peripheral Expansion.
Bus Interface Bridge (I2C/SPI/UART to Parallel)
The EPM570GT144C5N's 440 Macrocells and 5.4 ns tPD make it an ideal bus-bridge controller for converting serial protocols (I2C, SPI, UART) to parallel buses or vice versa. Its 212 user I/O pins can absorb dozens of GPIO expansion lines from a host microcontroller while running multi-master I2C state machines in parallel hardware. The instant-on flash configuration boots in under 1 ms, eliminating the cold-start latency of SRAM-based FPGAs. Designers typically place it between a low-pin-count MCU and legacy parallel peripherals, using the 8 Kbit user flash for boot parameters or non-volatile configuration storage.
추천
Power-Up Sequencing Controller
The MAX II family's instant-on non-volatile flash makes the EPM570GT144C5N ideal for power-sequencer applications in multi-rail systems such as servers, FPGAs, and ASIC boards. Within microseconds of VCCINT reaching 1.8 V, the device begins driving PG (power-good) signals in a deterministic order, eliminating the in-rush current spikes that occur when multiple rails turn on simultaneously. The 5.4 ns tPD allows sub-microsecond rail-to-rail sequencing with tight timing margins. Each PG output can drive a DC-DC converter's EN pin directly, supporting 3.3 V / 2.5 V / 1.8 V / 1.5 V rail architectures.
추천
Industrial Control Glue Logic
Factory automation controllers and PLC I/O expansion modules commonly use the EPM570GT144C5N as deterministic glue logic between sensors, actuators, and a supervisory MCU. Its 440 Macrocells easily handle 32-bit datapath multiplexing, encoder quadrature decoding, and PWM generation at 201.1 MHz fMAX. The 144-pin TQFP provides enough I/O for 24V-tolerant opto-isolated inputs with external resistor networks. The commercial 0 °C to +85 °C temperature grade covers most factory-floor enclosures; for outdoor or freezer environments, designers upgrade to the EPM570GT144I5N industrial variant in the same footprint.
추천
PCI Bus Target Interface
The EPM570GT144C5N's 3.3 V PCI-compliant I/O and 5.4 ns tPD make it a proven PCI target controller for legacy add-in cards, industrial PCs, and embedded systems. Its 212 user I/O pins can absorb a 32-bit PCI datapath plus control signals (FRAME, IRDY, TRDY, DEVSEL) and interrupt lines while leaving headroom for local peripheral expansion. The on-chip flash eliminates the boot PROM that discrete PAL/CEPLD designs required. Designers implement the target state machine in 50-100 Macrocells, leaving the remaining capacity for on-card logic functions.
추천
LED Display Driver / Sign Controller
Large LED matrix displays and video-wall controllers use the EPM570GT144C5N as a scan-row driver because its 212 user I/O pins can directly sink 32-64 multiplexed rows without external buffers, and its 201.1 MHz fMAX supports 24-bit color PWM at refresh rates above 1 kHz. The instant-on configuration boots to a known pattern instantly on power-up, an advantage over SRAM FPGAs that show garbage during configuration. The on-chip 8 Kbit flash can store calibration data, gamma tables, and boot logos.
추천
Microcontroller Peripheral Expansion
Low-pin-count microcontrollers (8-bit PIC, AVR, STM8, 8051) often lack sufficient GPIO or peripheral channels for end products, and the EPM570GT144C5N serves as a deterministic peripheral expander adding PWM, quadrature encoder, UART, and custom parallel interfaces via SPI or I2C command from the host MCU. Its 5.4 ns tPD ensures the host sees peripheral responses within 2-3 clock cycles. The flash-based instant-on behavior means peripherals are available before the host MCU finishes its bootloader, simplifying boot sequencing.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM570GT144C5N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM570GT144C5 | EPM570GT144I5N | EPM570GT144C4N | 5M570ZT144C4N |
|---|---|---|---|---|---|
| Package | 144-pin TQFP (20x20 mm) | 144-pin TQFP - same | 144-pin TQFP - same | 144-pin TQFP - same | 144-pin TQFP - same |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Family | MAX II | MAX II | MAX II | MAX II | MAX V |
| Logic Elements / Macrocells | 440 | 440 | 440 | 440 | 440 |
| Pin-to-Pin Delay (tPD) | 5.4 ns | 5.4 ns | 5.4 ns | ~7.0 ns | 9.0 ns |
| Maximum Internal Frequency | 201.1 MHz | 201.1 MHz | 201.1 MHz | 152 MHz | 118 MHz |
| Operating Temperature | 0C to +85C (Commercial) | 0C to +85C | -40C to +100C (Industrial) | 0C to +85C | 0C to +85C |
| Core Voltage (VCCINT) | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| User I/O Count (max) | 212 | 212 | 212 | 212 | 212 |
주요 차별점
- Instant-on non-volatile flash configuration in under 1 ms (vs SRAM-based small FPGAs (e.g., Cyclone IV))
- Deterministic 5.4 ns pin-to-pin propagation delay (vs MAX V 5M570ZT144C4N)
- 8 Kbit on-chip user flash memory for non-volatile parameter storage (vs Traditional discrete PAL/CEPLD devices)
- multiVolt I/O banks supporting 1.5V / 1.8V / 2.5V / 3.3V on same die (vs EPM570GT144C3N (C3 speed grade, same multiVolt architecture but slower tPD))
설계 노트
The EPM570GT144C5N requires a clean 1.8 V VCCINT supply and up to four VCCIO bank supplies (1.5 V / 1.8 V / 2.5 V / 3.3 V) independently driven from external regulators. Place a 0.1 µF X7R ceramic decoupling capacitor within 5 mm of every VCCINT and VCCIO pin, with a 10 µF bulk tantalum or ceramic capacitor at the supply entry point. Estimated: ICCINT is approximately 50 mA typical / 100 mA maximum at 201 MHz fMAX, so the 1.8 V regulator should be rated for at least 250 mA with 100 mV headroom budget. Power sequencing is not required between VCCINT and VCCIO; the device tolerates either rail coming up first.
The 144-pin TQFP package has a 0.5 mm pin pitch requiring careful PCB layout. Use 0.15 mm wide traces with 0.15 mm spacing exiting the pins, and provide a continuous ground plane on the layer directly beneath the device for controlled impedance and thermal dissipation. Estimated: The TQFP-144 has a theta_JA of approximately 35 C/W with no airflow, so at 1.8 V x 100 mA = 180 mW power dissipation, junction temperature rise is roughly 6.3 C above ambient - well within thermal limits without an external heatsink. For industrial designs, place the device away from heat-generating components and provide a copper pour of at least 1 square inch on top and bottom layers connected by thermal vias.
JTAG chain integrity is critical for in-system programming. Buffer TMS and TCK if more than three MAX II devices share the same JTAG chain, and place a 10 kΩ pull-up resistor on TMS, TDI, and TCK to VCCIO of the bank containing the JTAG pins. Keep JTAG trace lengths under 100 mm and avoid routing them parallel to switching signals to prevent false-clock glitches during programming. For multi-device chains, verify TDO-to-TDI propagation delays do not exceed 25 ns total to stay within IEEE 1149.1 timing.
Three common pitfalls with the EPM570GT144C5N: (1) Forgetting to enable unused JTAG pins - they must be tied high or driven by the JTAG master, otherwise the device may enter unexpected boundary-scan states. (2) Mixing VCCIO bank voltages incorrectly - the device allows different banks at different voltages, but each bank must be supplied with a single rail; do not apply 3.3 V to a pin in a 1.8 V bank or the I/O clamp diodes will forward-bias. (3) Using the C3 speed grade for timing paths rated above 100 MHz - check that tCO and tSU timing budgets still close after synthesis. Always re-run timing analysis in Quartus II (now Quartus Prime) after any pin reassignment.
규정 준수 정보
RoHS-compliant per Altera/Intel product page; lead-free 144-pin TQFP package. AEC-Q100 qualification not applicable for commercial-grade CPLD - industrial-grade variants exist in same family but are not AEC-Q100 qualified. Conflict-mineral reporting compliant per Altera/Intel supply chain disclosures.
