EPM9560ARI208-10N - MAX 9000 CPLD 12K Gates 560 Macrocells | Altera
부품 번호: EPM9560ARI208-10N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $28.95 | $2,895.00 |
| 250 | $25.4 | $6,350.00 |
| 500 | $22.1 | $11,050.00 |
EPM9560ARI208-10N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays with a global interconnect matrix, sitting hierarchically between simple SPLDs (PALs, GALs, 22V10s) and high-density FPGAs. The MAX 9000 family is built on Altera's third-generation Multiple Array MatriX (MAX) architecture, which integrates multiple Logic Array Blocks (LABs) of 16 macrocells each, interconnected through a programmable switch matrix. The EPM9560 has 35 LABs giving 560 macrocells total, which provides high-density glue-logic integration for system-level designs.
Key features include 5.0 V single-supply operation, JTAG-based in-system programming, built-in JTAG boundary-scan (IEEE 1149.1), programmable interconnect, 212 user I/O pins, and 484 flip-flops. The 208-pin RQFP package supports industrial 0 C to 70 C operating temperature and provides ample I/O for parallel bus interfaces, memory control, and state-machine-intensive glue logic. Unlike SRAM-based FPGAs, the EEPROM cells retain configuration without external boot memory, simplifying board design.
The MAX architecture uses a row-and-column interconnect structure where each LAB communicates through the Programmable Interconnect Array (PIA). This delivers predictable timing - critical for replacing discrete 22V10, PAL, and GAL devices in legacy designs - with deterministic 10 ns pin-to-pin delays and 4.5 ns clock-to-output (tCO) timing. The EEPROM process gives 100 program/erase cycles endurance and 20-year data retention.
Typical applications include peripheral bus interfacing (ISA, PCI, VME), memory address decoding and control logic, state-machine-based protocol converters, glue-logic integration replacing multiple discrete PLDs, and industrial control systems requiring non-volatile reconfigurable logic. The high I/O count and 5 V tolerance make it well-suited for legacy system designs.
When designing with the EPM9560, allocate sufficient decoupling (one 0.1 uF per VCC/GND pair) and follow the JTAG chain guidelines in the MAX 9000 datasheet family. The -10N suffix indicates the 10 ns speed grade with commercial 0-70 C temperature range; the 208-pin RQFP is the lower-cost plastic alternative to the 356-pin BGA version.
This page synthesizes distributor pricing, drop-in alternatives, design notes, and lifecycle context for the EPM9560ARI208-10N that are not aggregated on the manufacturer datasheet.
드롭인 대체품: EPM9560ARI208-10N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM9560ARI208-10N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Usable Gates, Supply Voltage, Configuration Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM9560ARC208-10N
✅ 드롭인✓ 재고 있음
$27.2 / 개
데이터시트 보기 →EPM9560ARC208-10
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560ARI208-10
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9320ARI208-10N
✅ 드롭인✓ 재고 있음
$16.2 / 개
데이터시트 보기 →EPM9480RC208-15
✅ 드롭인✓ 재고 있음
$24.95 / 개
데이터시트 보기 →EPM9560ARI208-10N 최대 정격 & 전기적 특성
| Family | MAX 9000 |
| Product Type | CPLD (Complex Programmable Logic Device) |
| Usable Gates | 12,000 |
| Macrocells | 560 |
| Logic Array Blocks (LABs) | 35 |
| Maximum User I/O Pins | 212 |
| Flip-Flops | 484 |
| Propagation Delay (tPD1) | 10 ns |
| Clock-to-Output (tCO) | 4.5 ns |
| Setup Time (tSU) | 3.0 ns |
| Maximum Counter Frequency (fCNT) | 144.9 MHz |
| 공급 전압 | 5.0 V |
| Logic Family | CMOS EEPROM |
| Programming Interface | JTAG (IEEE 1149.1) - In-System Programmable |
| 패키지 | 208-pin RQFP (Plastic) |
| 동작 온도 | 0 C to 70 C (Commercial) |
| 실장 유형 | Surface Mount |
EPM9560ARI208-10N 208-pin rqfp (plastic) 핀 구성 가이드
EPM9560ARI208-10N(208-pin rqfp (plastic) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EPM9560ARI208-10N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EPM9560ARI208-10N 적합 용도: 6 애플리케이션s: Legacy Peripheral Bus Interfacing (ISA / VME), Memory Address Decoding and Chip-Select Generation, State-Machine Protocol Converters, Industrial Glue-Logic Integration, Test and Measurement Equipment Backplane Logic, Legacy Telecom and Networking Interface Cards.
Legacy Peripheral Bus Interfacing (ISA / VME)
The EPM9560ARI208-10N is well suited for ISA and VME peripheral bus glue logic, where its 153 user I/O pins and 560 macrocells can decode addresses, generate chip selects, and arbitrate interrupts without external TTL. Its deterministic 10 ns pin-to-pin propagation delay (tPD) and 4.5 ns clock-to-output (tCO) meet the ISA bus 8 MHz timing budget with margin, while the 5.0 V tolerance matches legacy bus signaling. Unlike SRAM-based FPGAs, the EEPROM-based MAX 9000 retains configuration at power-up, eliminating the boot-memory overhead common in industrial backplane designs.
추천
Memory Address Decoding and Chip-Select Generation
With 560 macrocells and 35 Logic Array Blocks, the EPM9560ARI208-10N can replace dozens of 22V10, PAL, and GAL devices in memory decoding trees for 16- and 32-bit systems. The programmable interconnect array (PIA) delivers fan-in without speed penalty, and the 4.5 ns tCO timing supports zero-wait-state decoding for 33 MHz microprocessors. The EEPROM process gives 100 program/erase cycles and 20-year retention, making it appropriate for production memory subsystems that may require occasional field updates via JTAG.
추천
State-Machine Protocol Converters
The EPM9560ARI208-10N's 484 flip-flops and high counter frequency (144.9 MHz fCNT) make it ideal for serial protocol conversion between UART, SPI, I2C, and proprietary industrial buses. Its deterministic timing allows precise bit-banging of low-speed protocols with predictable latency, while the 12K usable gates fit entire multi-state converters plus auxiliary logic. The non-volatile EEPROM configuration makes the device suitable for industrial equipment that must boot to a known state without external memory.
추천
Industrial Glue-Logic Integration
The EPM9560ARI208-10N consolidates multiple discrete PLDs (PAL, GAL, 22V10) into a single 208-pin RQFP, reducing board area, BOM count, and inventory SKUs in industrial automation equipment. The 153 available user I/O pins accept wide parallel buses, multiple encoder inputs, and discrete control signals. The 5.0 V tolerance interfaces directly with TTL and CMOS logic families common in legacy industrial controllers, and the JTAG ISP enables in-field firmware updates for retrofits and upgrades.
추천
Test and Measurement Equipment Backplane Logic
Test equipment benefits from the EPM9560ARI208-10N's deterministic timing and high I/O count for instrument backplane switching, trigger routing, and timing generation. The 144.9 MHz fCNT supports precise counter and timer implementations, while the 560 macrocells provide room for trigger sequencers and arbiter logic. The non-volatile configuration ensures the instrument boots to a known test configuration, and the JTAG boundary-scan (IEEE 1149.1) aids board-level test coverage in production.
추천
Legacy Telecom and Networking Interface Cards
The EPM9560ARI208-10N is well suited to legacy telecom line cards and network interface adapters where 5.0 V I/O, deterministic timing, and non-volatile boot are required. Its 153 user I/O pins accept TDM bus data, control lines, and status indicators, while the 10 ns tPD enables glue-logic pipelines operating at telecom system clock rates. The EEPROM configuration makes the part ideal for ruggedized outdoor equipment where external boot memory is undesirable.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM9560ARI208-10N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM9560ARC208-10N | EPM9560ARC208-10 | EPM9560ARI208-10 | EPM9320ARI208-10N | EPM9480RC208-15 |
|---|---|---|---|---|---|---|
| Package | 208-pin RQFP | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 560 | 560 | 560 | 560 | 320 (-43%) | 480 (-14%) |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 6,000 (-50%) | 10,000 (-17%) |
| Propagation Delay (tPD) | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns | 15 ns (+50%) |
| Counter Frequency (fCNT) | 144.9 MHz | 144.9 MHz | 144.9 MHz | 144.9 MHz | 144.9 MHz | 118 MHz (-19%) |
| Lead-Free / RoHS | Yes (N suffix) | Yes (N suffix) | No (SnPb) | No (SnPb) | Yes (N suffix) | No (SnPb) |
| User I/O (208-RQFP variant) | 153 | 153 | 153 | 153 | 112 | 146 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Highest macrocell density in MAX 9000 family (vs EPM9480RC208-15)
- Fastest 10 ns speed grade available in 208-RQFP (vs EPM9480RC208-15)
- Lead-free RoHS-compliant finish (vs EPM9560ARI208-10)
설계 노트
Estimated: The EPM9560ARI208-10N operates from a single 5.0 V supply with multiple VCC and GND pins distributed across the 208-pin RQFP package. Place one 0.1 uF decoupling capacitor adjacent to each VCC/GND pair, and add a single 10 uF bulk capacitor near the package supply entry. The CMOS EEPROM core draws standby current well under 100 mA in static operation; peak current during in-system programming (ISP) via JTAG is higher - check the MAX 9000 datasheet Icc specification for the exact ISP surge budget.
Use a 4-layer PCB with continuous ground plane for the 208-pin RQFP. The RQFP has 0.5 mm pitch leads that require precise land pattern adherence to the IPC-7351 nominal footprint. Assign JTAG pins (TDI, TDO, TMS, TCK) to dedicated board test points or a JTAG header for in-system programming and IEEE 1149.1 boundary-scan. Keep clock inputs (GCLK1, GCLK2, GCLK3) on dedicated input pins per the datasheet, with trace lengths matched if multiple clocks are used.
Critical: The EPM9560ARI208-10N is obsolete and not recommended for new designs. For new production in 2026, design with active parts such as Intel MAX V (5M160ZE64C5N) or MAX 10 (10M08SCE144I7G) CPLDs that share the Quartus toolchain. If the design must remain on the EPM9560 for legacy compatibility, validate long-term supply with multiple aftermarket distributors and qualify a second-source Altera/Intel part (EPM9560ARC208-10N or EPM9480RC208-15) as a backup.
The EPM9560ARI208-10N provides 5.0 V CMOS-compatible I/O with deterministic 10 ns propagation delay. For high-speed busses operating above 50 MHz, use series damping resistors (22-33 ohm) near the CPLD output to control ringing on the RQFP leads. The 208-pin RQFP lead inductance (~2-3 nH per lead) is sufficient to cause overshoot on fast edges; a small series resistor or ferrite bead mitigates this without affecting timing margin.
규정 준수 정보
Lead-free terminal finish indicated by N suffix. AEC-Q100 not applicable - this is a commercial-grade logic device. REACH and halogen-free status not documented in available verified data.
