Renesas Electronics

ISL81483IB - 5V 250kbps RS-485/RS-422 Transceiver | Renesas

부품 번호: ISL81483IB ✓ 활성
5 V Vdss RS-485 and RS-422 Rds(on) 8-pin SOIC Package
MOQ: 1 |

ISL81483IB 개요

The Renesas Electronics ISL81483IB is a 5V half-duplex RS-485 and RS-422 transceiver rated for data rates up to 250kbps and housed in an 8-pin SOIC package. Its 1/8-unit-load receiver network supports as many as 256 transceivers on one bus, making the device suitable for distributed industrial communication systems with numerous remote nodes. The low-power design provides an efficient balance between bus loading, communication speed, and system heat dissipation.

An RS-485 transceiver is an interface IC that converts between logic-level signals and differential bus signals. RS-422 supports point-to-point, point-to-multipoint, and multidrop topologies, while RS-485 allows longer cables, broader node counts, and noise-resistant differential signaling. The ISL81483 belongs to the broader hierarchy of interface transceiver, communications interface, and semiconductor devices used to connect embedded controllers to field buses.

Key characteristics include 1/8-unit-load bus loading, 5V operation, a maximum data rate of 250kbps, and support for both RS-485 and RS-422 networks. The reduced receiver loading permits more equipment on the same bus than a conventional one-unit-load receiver. The manufacturer documents low-power operation and options for high-speed or slew-rate-limited operation, allowing the interface strategy to be selected according to channel length, topology, and electromagnetic compatibility requirements.

The ISL81483 and ISL81487 family combines a differential driver, differential receiver, and transmit/receive control in a compact 8-pin SOIC. Reduced unit load lowers the effective bus impedance presented by each node, which can help preserve signal amplitude and operating margin in long or highly populated networks. Designers must still account for termination, biasing, common-mode limits, and grounding according to the application circuit in the Renesas datasheet.

Typical uses include process-automation networks, remote utility meter reading, industrial sensor gateways, building-control equipment, and remote instrumentation. In a utility-meter network, multiple apartment or building meters can route readings through an RS-485 segment toward a concentrator. The 256-node capability shown by the 1/8-unit-load architecture is particularly useful when field equipment must remain operational at low bus voltage.

The primary design consideration is selecting the correct edge rate and bus topology. High-speed operation maximizes throughput but can increase reflected and radiated signal effects on long cables, while slew-rate limiting can reduce EMI at the cost of maximum data rate. Place the device near the bus connector, provide a solid ground reference, follow recommended termination practices, and validate signal integrity across cable lengths and environmental conditions.

This product page combines the Renesas family description with practical bus-design guidance, package details, sourcing information, and a parameter-focused comparison of true pin-compatible alternatives. It helps engineers identify the correct transceiver role, assess node-count and data-rate constraints, and determine whether a direct replacement preserves the existing 8-pin SOIC PCB footprint.

드롭인 대체품: ISL81483IB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ISL81483IB (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Data Rate, Package, Product Type, RoHS Status.

Renesas Electronics
Maximum Data Rate: 5 Mbps
Package: 8-SOIC
Product Type: RS-485/RS-422 half-duplex transceiver
비교 대상: ISL81483IB →

ISL8487EIBZ-T

✅ 드롭인
📦 8-pin SOIC
0 package or terminal differences reported in the cited comparison; no principal performance-characteristic difference was identified.

📋 참조 대체품 (카탈로그에 없음)

ISL81487

✅ 드롭인 ⚠️ 사양 미검증
📦 8-pin SOIC
Same 5V RS-485/RS-422 family positioning and 1/8-unit-load architecture; exact suffix-specific timing and control differences require datasheet confirmation.

📋 참조 대체품 (카탈로그에 없음)

ISL81483IB 사양

Product Type Half-duplex RS-485/RS-422 transceiver
공급 전압 5 V
Maximum Data Rate 250 kbps
Receiver Unit Load 1/8 unit load
Maximum Bus Node Count 256 transceivers
Supported Standards RS-485 and RS-422
Duplex Mode Half-duplex
Driver Configuration 1/1
패키지 8-pin SOIC
실장 유형 Surface mount
Operating Mode Options High-speed or slew-rate-limited
Power Classification Low power
Lead-Free Status Lead free
RoHS 상태 Non-compliant
Application: Process Automation Supported for large-node-count process automation networks
Application: Remote Meter Reading Supported for remote utility meter reading systems

ISL81483IB 8-pin soic 핀 구성 가이드

ISL81483IB(8-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ISL81483IB의 8-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ISL81483IB.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ISL81483IB 적합 용도: 6 애플리케이션s: Remote Utility Meter Reading, Process Automation Field Bus, Industrial Sensor Gateway, Building Control Network, Remote Instrumentation, Data Acquisition Terminal.

🔧

Remote Utility Meter Reading

The ISL81483IB is well suited to remote utility meter-reading networks that gather readings from many distributed endpoints and route them toward a concentrator. Its 5V operating supply fits embedded metering electronics, while the 1/8-unit-load receiver architecture permits as many as 256 transceivers on one RS-485 segment. The 250kbps maximum data rate supports efficient polling of meters, sensors, and endpoint identification data. Designers should use differential bus routing, appropriate termination, and a biasing strategy suited to the deployed cable length and node population.

🏭

Process Automation Field Bus

Process-automation installations commonly connect many remote sensors, actuators, and controllers over a common differential bus. The ISL81483IB reduces each receiver's loading to 1/8 unit, allowing a node count of up to 256 and preserving operating margin in larger systems. Its RS-485 and RS-422 support, 250kbps capability, and selectable high-speed or slew-rate-limited behavior make it useful for factory-floor communications where both network density and predictable signal behavior matter.

🧩

Industrial Sensor Gateway

An industrial sensor gateway can use the ISL81483IB to bridge a local controller to an RS-485 network of distributed sensing nodes. The 1/8-unit load supports a larger population of compact remote sensors than a conventional one-unit-load receiver, while the 250kbps rate accommodates periodic measurement traffic and configuration commands. The 8-pin SOIC format keeps the interface compact, and slew-rate-limited operation can help control edge-related EMI in installations containing long cables or nearby sensitive equipment.

🏠

Building Control Network

The ISL81483IB can connect building-control equipment such as distributed room sensors, dampers, lighting controllers, and HVAC interfaces through an RS-485 backbone. Its low 1/8-unit receiver loading is valuable in buildings with numerous nodes and short branch cabling, while 250kbps is more than adequate for supervisory control traffic. Slow or slew-rate-limited signaling may be preferable on older or extended building wiring, subject to cable-length and timing validation.

📡

Remote Instrumentation

Remote laboratory and industrial instrumentation systems benefit from the ISL81483IB when many measurement instruments must share a two-wire differential bus. The reduced 1/8-unit load allows higher node density, and the device's support for both RS-485 and RS-422 gives designers flexibility in point-to-point and multidrop arrangements. At rates up to 250kbps, the interface can carry command, status, and measurement traffic, while proper grounding and termination remain essential for reliable operation.

🖥️

Data Acquisition Terminal

The ISL81483IB is appropriate for distributed data-acquisition terminals that forward sensor readings to a central controller over RS-485. The 1/8-unit receiver loading enables a larger group of remote acquisition modules, and the 5V supply can simplify integration with low-voltage embedded electronics. A data rate of up to 250kbps is useful for periodic sample batches and device commands. For each terminal, validate driver enable timing, bus-idle behavior, termination, and protection against industrial transients.

추천 제품 요약

ISL81487 Closely related RS-485/RS-422 family member for additional bus-interface options 사용처: Remote Utility Meter Reading, Process Automation Field Bus, Industrial Sensor Gateway, Building Control Network, Remote Instrumentation, Data Acquisition Terminal ISL8487EIBZ-T Footprint-compatible transceiver alternative for design assessment 사용처: Remote Utility Meter Reading, Process Automation Field Bus, Industrial Sensor Gateway, Building Control Network, Remote Instrumentation, Data Acquisition Terminal
What is the ISL81483IB?
The ISL81483IB is a 5V, half-duplex RS-485 and RS-422 transceiver in an 8-pin SOIC package. According to the Renesas ISL81483 and ISL81487 datasheet, it presents a 1/8-unit load, allowing as many as 256 transceivers on one network. The device supports data rates up to 250kbps and includes low-power, high-speed or slew-rate-limited operating options for industrial communications.
How many RS-485 nodes can the ISL81483IB support?
The ISL81483IB supports up to 256 transceivers on one RS-485 bus because its receiver presents a 1/8-unit load. The Renesas ISL81483 and ISL81487 datasheet identifies this high node-count capability as useful in process automation and remote meter-reading networks. Actual deployment still depends on cable length, topology, termination, biasing, and the maximum node count allowed by the complete system.
What is the maximum data rate of ISL81483IB?
The ISL81483IB supports data rates up to 250kbps. The manufacturer identifies the ISL81483 as a low-power RS-485 and RS-422 transceiver with high-speed or slew-rate-limited options. The appropriate option depends on the physical bus: higher edge rates provide more throughput, while slew-rate limiting can reduce electromagnetic interference on longer or noisier cabling.
Where can I download the ISL81483IB datasheet PDF?
The official ISL81483 and ISL81487 datasheet is available from the Renesas Electronics document page at https://www.renesas.com/en/document/dst/isl81483-isl81487-datasheet. Use the pin-description table, electrical-characteristics table, and application circuits in that document when assigning PCB tracks or checking the ISL81483IB operating limits. The IB suffix identifies the specified 8-pin SOIC orderable variant.
Where can I find the ISL81483IB pinout?
Use the pin-description diagram in the Renesas ISL81483 and ISL81487 datasheet for the authoritative ISL81483IB pin assignment. The component is an 8-pin SOIC, and its exact terminal mapping should be checked against the device variant used in the design. Assigning the driver, receiver, enable, data, bus, and supply pins from the manufacturer diagram prevents errors that could damage the transceiver or the bus.
What is the difference between RS-485 and RS-422 operation with ISL81483IB?
The ISL81483IB supports both RS-485 and RS-422 differential signaling. RS-422 is primarily suited to point-to-point, point-to-multipoint, and multidrop arrangements, while RS-485 is commonly used for longer, higher-node-count multidrop buses. The Renesas datasheet identifies both standards, and the same 1/8-unit-load receiver architecture helps preserve bus margin when multiple transceivers are installed.
Can ISL81483IB be used in a remote utility meter-reading network?
Yes, the ISL81483IB is suitable for remote utility meter-reading networks. The Renesas ISL81483 and ISL81487 datasheet specifically describes routing individual apartment or building meter readings through an RS-485 network to a concentrator. Its 1/8-unit load permits as many as 256 transceivers, making it useful where many remote metering nodes share a common field bus.
ISL81483IB vs ISL8487EIBZ-T - which is better for an RS-485 bus?
The ISL8487EIBZ-T is the stronger candidate when an exact footprint-compatible alternative is required because the cited comparison identifies consistent terminals, package, and principal performance characteristics. The ISL81483IB remains appropriate when its documented 1/8-unit-load, 250kbps RS-485/RS-422 positioning is important. Confirm driver enable behavior, edge rate, electrical limits, and lifecycle requirements against the Renesas datasheet before production substitution.
What is the best drop-in replacement for ISL81483IB?
The ISL8487EIBZ-T is the best directly supported replacement candidate because a published comparison states that its terminals and package are consistent and that no modification is required. The alternative still uses an 8-pin SOIC package and preserves the principal RS-485/RS-422 transceiver characteristics. Engineering approval should still confirm enable polarity, data rate, common-mode limits, and bus loading against the target design.
Can ISL8487EIBZ-T replace ISL81483IB?
Yes, ISL8487EIBZ-T can serve as a footprint-compatible alternative to ISL81483IB because the published comparison identifies matching terminals and packages and reports no required modification. Nevertheless, a mechanical match does not replace complete electrical validation. Check data rate, receiver unit load, driver and receiver timing, common-mode range, enable logic, and thermal performance before approving the substitution.
When should I choose ISL81483IB instead of a generic RS-485 transceiver?
Choose ISL81483IB when a 5V, 250kbps RS-485/RS-422 interface and a reduced 1/8-unit receiver load are important. Its documented ability to support as many as 256 transceivers is particularly useful for process automation and remote metering. Select a generic alternative only after confirming the same 8-pin SOIC pinout, timing, common-mode limits, bus loading, and driver-enable behavior.
Is ISL81483IB suitable for process automation and industrial sensor networks?
Yes, ISL81483IB is suitable for process automation and industrial sensor networks. Its 5V supply, 250kbps maximum rate, and 1/8-unit receiver load support distributed field-bus equipment with many nodes. The Renesas datasheet explicitly identifies process automation as a target application. For production use, also verify isolation requirements, surge protection, grounding, cable length, and environmental limits.
What is the best Renesas equivalent for ISL81483IB?
The ISL8487EIBZ-T is the best supported Renesas alternative for a direct replacement because the published comparison identifies consistent terminals, package, and principal performance characteristics. The ISL81487 is also closely related through the Renesas ISL81483 and ISL81487 family documentation, but its exact suffix, electrical ratings, and enable configuration must be matched before use. Use the manufacturer datasheet and a device cross-reference tool to finalize any substitution.
How do I choose between high-speed and slew-rate-limited ISL81483IB operation?
Choose the high-speed mode when the RS-485 network requires the full 250kbps data rate and channel conditions are well controlled. Choose slew-rate-limited operation when lower edge rates reduce EMI or ringing on longer cables. The Renesas ISL81483 and ISL81487 datasheet describes both options. Final selection should follow the application circuit and be validated with the intended cable, terminations, node count, and connector.
Where can I buy ISL81483IB and check current price and lead time?
Use the Request a Quote form on this page to request the current price, stock status, lead time, and order quantity for ISL81483IB. The visible quote workflow provides a single point for commercial review without relying on potentially stale catalog figures. Confirm the 8-pin SOIC packaging, manufacturer part number, and required quantity in the request so the quotation reflects the exact device.

엔지니어링 참조 데이터: ISL81483IB — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ISL81483IB for a 5V, half-duplex RS-485 or RS-422 interface that requires up to 250kbps and a low 1/8-unit receiver load. Its documented support for as many as 256 transceivers is especially useful in process automation, remote meter reading, and other dense industrial field buses. The ISL8487EIBZ-T is the strongest published footprint-compatible alternative when its detailed electrical ratings meet the target design, because the cited comparison reports consistent terminals, package, and principal characteristics. Consider ISL81487 when working within the related Renesas family and when its exact suffix-specific configuration matches the system. In every case, verify enable polarity, driver timing, common-mode range, receiver thresholds, propagation delay, termination requirements, and the selected edge-rate mode against the manufacturer datasheet before releasing a production design.

대체품과의 비교

파라미터 이 제품 ISL8487EIBZ-T ISL81487
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Product Type Half-duplex RS-485/RS-422 transceiver RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supported Standards RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422

주요 차별점

  • High node-count capability (vs ISL8487EIBZ-T)
  • Documented communication-speed ceiling (vs ISL81487)
  • Dual RS-485 and RS-422 support (vs ISL8487EIBZ-T)

설계 노트

Route the differential A and B connections as a closely matched pair on the PCB, minimize stubs, and keep the transceiver interface section physically close to the bus connector. Provide a low-impedance ground reference and follow the manufacturer application circuit for termination and protection placement. The 8-pin SOIC package leaves limited room for optional networks, so establish the resistor values and protection strategy before finalizing placement.

Choose high-speed or slew-rate-limited operation according to channel length and electromagnetic compatibility requirements. The ISL81483 supports up to 250kbps, but faster edge rates can increase ringing and radiated emissions on long or unterminated cables. Validate the intended node count, cable type, termination, and bias arrangement in hardware, and ensure the receiver remains enabled only when the bus is actively driven.

Do not assume that every 8-pin RS-485 transceiver has identical enable and receiver-control polarity. Check the ISL81483IB terminal assignments and logic levels in the Renesas datasheet before connecting the microcontroller. Also avoid leaving the driver continuously enabled on a multidrop bus, because multiple drivers can contend when their output states differ and prevent reliable communication.

규정 준수 정보

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The product listing identifies the device as lead free and RoHS non-compliant. No qualifying automotive qualification, REACH declaration, halogen-free declaration, or conflict-minerals statement is available for this orderable variant.

관련 검색

ISL81483IB datasheet ISL81483IB pinout ISL81483IB datasheet pdf ISL81483IB equivalent ISL81483IB replacement ISL81483IB cross reference ISL81483IB vs ISL8487EIBZ-T ISL81483IB 250kbps ISL81483IB 1/8 unit load ISL81483IB 8-SOIC Renesas ISL81483IB ISL81483IB price ISL81483IB stock ISL81483IB process automation ISL81483IB remote meter reading

관련 부품 & 용어

Renesas Electronics ISL81483IB ISL8487EIBZ-T ISL81487 RS-485 RS-422 half-duplex transceiver differential transceiver interface IC communications interface semiconductor 1/8 unit load 250 kbps 5 V 8-pin SOIC SOIC package family surface-mount package slew-rate limiting process automation remote utility meter reading industrial sensor gateway building control network data acquisition RS-485 bus RoHS
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기