M1AFS600-1FGG484K - Fusion FPGA 600K Gates 484-BGA | Microchip
부품 번호: M1AFS600-1FGG484K ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $195 | $195.00 |
| 10 | $185.25 | $1,852.50 |
| 100 | $171.6 | $17,160.00 |
| 500 | $163 | $81,500.00 |
| 1,000 | $155 | $155,000.00 |
M1AFS600-1FGG484K 개요
A field-programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable fabric, sitting within the broader hierarchy of programmable logic devices (PLDs) that also includes CPLDs and SPLDs. Unlike SRAM-based FPGAs that require an external configuration device, flash-based FPGAs such as the Fusion family store their configuration in on-chip flash, giving instant-on behavior and inherent resistance to configuration readback attacks.
Key differentiating features include configurable analog peripherals, large flash memory blocks, and comprehensive clock generation and management circuitry integrated on the same die as the high-performance flash-based programmable logic. The 130nm flash process operating from a 1.5V core supply eliminates the configuration PROM, reduces bill-of-materials count, and shortens power-up time compared with SRAM FPGA architectures.
Architecturally, the Fusion device combines the ProASIC3-style fabric with analog conditioning blocks, a ARM Cortex-M1 hard IP option for embedded control, and clock management circuitry, mitigating the need for ASIC migration at higher volumes and making it a cost-effective ASIC replacement for consumer, networking and communications, computing, and avionics markets.
Typical applications include mixed-signal system integration in industrial control, power-supply and board-level management, portable instrumentation, and aerospace/avionics subsystems where single-chip analog-plus-logic integration reduces board area and component count.
When designing with the M1AFS600-1FGG484K, budget power rails for core (1.5V), I/O banks, and analog blocks separately, and follow the Microchip power-supply decoupling guidance in the Fusion datasheet to preserve analog accuracy.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: M1AFS600-1FGG484K — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: M1AFS600-1FGG484K (동일 폼 팩터 및 풋프린트) — 차이점: Package, Family, System Gates, Process Technology, Speed Grade.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AFS600-1FGG484K
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
M7AFS600-1FGG484
✅ 드롭인✓ 재고 있음
$200 / 개
데이터시트 보기 →M7AFS600-FGG484I
✅ 드롭인✓ 재고 있음
$219.2 / 개
데이터시트 보기 →M1AFS1500-1FGG484K
✅ 드롭인✓ 재고 있음
$1560 / 개
데이터시트 보기 →M1AFS600-1FGG484K 최대 정격 & 전기적 특성
| Family | Fusion (M1 series) |
| System Gates | 600K |
| Total Flash Configuration Bits | 110592 |
| User I/O | 172 |
| Embedded Processor | ARM Cortex-M1 (M1 variant) |
| Technology | 130 nm flash-based CMOS |
| Core Voltage | 1.5 V |
| 패키지 | 484-pin FBGA (FGG484) |
| 실장 유형 | Surface Mount |
| Max Frequency | 1282.05 MHz (family reference) |
| Configuration Memory | On-chip flash (single-chip, instant-on) |
| Analog Peripherals | Configurable analog blocks (Fusion architecture) |
| Clock Management | Integrated clock generation and management circuitry |
| Speed Grade | -1 |
| Packaging Option | Tray (K suffix) |
M1AFS600-1FGG484K 484-pin fbga (fgg484) 핀 구성 가이드
M1AFS600-1FGG484K(484-pin fbga (fgg484) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: M1AFS600-1FGG484K.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
M1AFS600-1FGG484K 적합 용도: 6 애플리케이션s: Board Power Management and Control, Industrial Automation and Control, Avionics and Aerospace Subsystems, Portable and Battery-Powered Instrumentation, Networking and Communications Interface Bridging, ASIC Prototyping and Low-Volume Production.
Board Power Management and Control
The M1AFS600-1FGG484K fits board-level power management because Fusion integrates configurable analog monitoring blocks with flash-based logic and the ARM Cortex-M1 processor in one 484-FBGA device. The analog peripherals can measure voltage, current, and temperature rails while the Cortex-M1 executes sequencing and fault-response firmware, replacing a discrete microcontroller plus monitoring ASIC combination. Because configuration lives in on-chip flash, the device is monitoring-active within milliseconds of power-up, an advantage over SRAM FPGAs that sit idle during configuration. Designers should reserve analog input channels for the highest-risk rails and budget the 1.5V core supply separately from I/O and analog rails per the Microchip Fusion datasheet.
추천
Industrial Automation and Control
In industrial control panels, the M1AFS600-1FGG484K consolidates deterministic glue logic, sensor conditioning via Fusion analog blocks, and embedded control firmware on the ARM Cortex-M1 into one surface-mount 484-FBGA package. Flash-based configuration means the FPGA is functional immediately at power-up with no external boot device, improving uptime in machinery that must respond quickly after a power cycle. The 172 user I/Os support parallel interfaces to motor drivers, encoders, and fieldbus transceivers, while 600K gates absorb protocol bridging and custom peripherals. Designers should validate I/O bank voltage assignments early and use Libero SoC power estimation to size the 1.5V core regulator for worst-case utilization.
추천
Avionics and Aerospace Subsystems
Microchip positions the Fusion family as a cost-effective ASIC replacement for avionics markets, and the M1AFS600-1FGG484K suits non-flight-critical avionics functions such as health monitoring, data acquisition, and interface bridging. The flash-based fabric provides inherent resistance to configuration upset compared with SRAM cells, and the integrated analog block can supervise critical supply rails without a separate monitor IC. The ARM Cortex-M1 runs housekeeping firmware while the 600K-gate fabric implements deterministic logic paths. Program teams should verify the required temperature flow (-1 commercial/industrial grade here) against program specifications and consider Microchip's dedicated space and defense flows for mission-critical applications.
추천
Portable and Battery-Powered Instrumentation
Handheld and portable instruments benefit from the M1AFS600-1FGG484K's single-chip integration: analog conditioning, clock management, logic, and the ARM Cortex-M1 processor collapse into one 484-FBGA footprint, shrinking board area versus a multi-chip MCU-plus-CPLD solution. Flash configuration eliminates the power and board cost of a configuration PROM, and instant-on behavior lets the instrument present a valid front end within milliseconds of the power switch. The 130nm flash process draws static core current from a 1.5V rail that designers must budget via the Libero power calculator. For battery designs, gate unused analog blocks and place unused I/O banks in defined low-power states per the Fusion user guide.
추천
Networking and Communications Interface Bridging
Line cards and communication modules use the M1AFS600-1FGG484K to bridge diverse interfaces - parallel buses to serial links, legacy protocols to modern transceivers - using 172 user I/Os across multiple banks. The Fusion clock generation and management circuitry on die reduces the external clock-tree component count, and the 600K-gate fabric absorbs framing, buffering, and error-checking logic while the ARM Cortex-M1 manages higher-layer housekeeping. Flash-based configuration gives deterministic link initialization, an advantage in redundant systems where both active and standby cards must be ready immediately. Confirm I/O standards supported per bank in the Fusion datasheet and simulate signal integrity for high-speed pairs.
추천
ASIC Prototyping and Low-Volume Production
The Fusion architecture mitigates the need for ASIC migration at higher volumes, making the M1AFS600-1FGG484K a practical ASIC replacement target for consumer, computing, and communications products at moderate volumes. Designers prototype gate-level netlists in the 600K-gate flash fabric, and for low-to-mid volume production the same device simply continues into manufacturing, eliminating mask charges and NRE. The monolithic integration of analog, clocking, and ARM Cortex-M1 logic reproduces much of a mixed-signal ASIC's function without custom silicon risk. Teams should plan for utilization headroom (typically 70-80% of 600K gates) and verify timing at the -1 speed grade before committing the design to volume.
추천
추천 제품 요약
엔지니어링 참조 데이터: M1AFS600-1FGG484K — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AFS600-1FGG484K | M7AFS600-1FGG484 | M7AFS600-FGG484I | M1AFS1500-1FGG484K |
|---|---|---|---|---|---|
| Package | 484-FBGA (FGG484) | 484-FBGA (FGG484) - same | 484-FBGA (FGG484) - same | 484-FBGA (FGG484) - same | 484-FBGA (FGG484) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600K | 600K | 600K | 600K | 1M-class |
| Embedded ARM Cortex-M1 | Yes (M1 variant) | No (base Fusion) | No (M7 variant) | No (M7 variant) | Yes (M1 variant) |
| Configuration Memory | 110592 bits on-chip flash | On-chip flash (same architecture) | On-chip flash (same architecture) | On-chip flash (same architecture) | On-chip flash, larger array |
| Speed Grade | -1 | -1 | -1 (M7 flow) | standard (M7 flow) | -1 |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
주요 차별점
- Embedded ARM Cortex-M1 processor (vs AFS600-1FGG484K)
- Same footprint with double the logic (vs M1AFS1500-1FGG484K)
- Single-chip instant-on flash configuration (vs SRAM-based FPGAs)
- Integrated configurable analog (vs A3PE600-1FGG484I (ProASIC3E))
설계 노트
The M1AFS600-1FGG484K requires a 1.5V core rail plus separate I/O bank and analog supplies. Estimated: dynamic core current scales with clock frequency and utilization, so use the Libero SoC power calculator with your post-place-and-route netlist rather than a family typical value. Sequence the analog rail per the Fusion datasheet before or with the core rail so the analog block powers up in a defined state. Because flash-based FPGAs draw no configuration surge current at power-up, the supply inrush is dominated by decoupling capacitor charging - size soft-start accordingly.
The 484-ball FBGA at 1.0 mm pitch requires a controlled-impedance stackup and via-in-pad or dog-bone escape routing for inner rows. Follow the Microchip Fusion PCB layout guidelines for ball-map escape patterns, and allocate solid, unbroken ground planes directly beneath the die to contain return paths for the analog block. Decouple each supply rail with the capacitor combination recommended in the Fusion datasheet, placing the smallest capacitors closest to the corresponding balls to minimize loop inductance.
Do not confuse the M1 flow with M7 flow devices: Libero SoC will not accept a design constrained for M7AFS600 on an M1AFS600 device and vice versa without re-implementation, and I/O bank assignments can differ. Also verify the 'K' suffix packaging (tray) matches your assembly line - tape-and-reel handling of FBGAs requires different feeder setup. Finally, confirm speed grade -1 timing closure with your actual netlist; assuming faster family figures leads to late-stage timing failures.
규정 준수 정보
Verified web data does not state environmental compliance explicitly. The 'GG' package suffix conventionally denotes lead-free balls in Microchip/Actel numbering, but confirm via the Microchip product page environmental data or certificate of conformance.
