M1AFS600-FG484K - 600K-Gate Fusion FPGA, 172 I/O | Microchip
부품 번호: M1AFS600-FG484K ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $155 | $155.00 |
| 10 | $142.6 | $1,426.00 |
| 100 | $131.75 | $13,175.00 |
| 500 | $119.4 | $59,700.00 |
| 1,000 | $108.5 | $108,500.00 |
M1AFS600-FG484K 개요
An FPGA (field programmable gate array) is a type of programmable logic device whose interconnect and logic function are configured after manufacturing, sitting within the broader hierarchy of programmable ICs: FPGA -> programmable logic device -> digital IC -> semiconductor. The Fusion family distinguishes itself by combining flash-based programmable fabric (no external configuration PROM required) with analog mixed-signal peripherals, an ARM Cortex-M1 microcontroller subsystem, and industry-standard interfaces.
Key features of the M1AFS600-FG484K include 600K system gates of flash fabric, 172 user I/O pins, and instant-on power-up behavior inherent to flash FPGA technology. Because configuration data is stored on-chip in non-volatile flash, the device requires no external boot flash, reduces BOM cost, and improves board-level security against bitstream interception compared with SRAM FPGAs.
Architecturally, the Fusion fabric consists of VersaTiles - fine-grained flash switch-based logic tiles - supporting both combinational and sequential implementations, plus embedded flash blocks, SRAM, and analog blocks such as ADC, voltage/temperature monitors, and RTC in the broader family. The ARM Cortex-M1 core allows soft-logic and processor workloads to be partitioned in one device.
Typical applications include industrial automation control, portable instrumentation, medical equipment, battery-powered systems, and secure embedded controllers where instant-on, low-power flash FPGA operation and mixed-signal integration matter.
When designing with this device, verify the commercial temperature grade (K suffix) suits your environment; industrial-grade I-suffix siblings exist in the same footprint. Check I/O bank voltage assignments in Libero SoC before routing.
This page synthesizes distributor availability, same-package drop-in speed/temp-grade alternatives, and engineering design notes not found in the manufacturer datasheet.
드롭인 대체품: M1AFS600-FG484K — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: M1AFS600-FG484K (동일 폼 팩터 및 풋프린트) — 차이점: Package, Family, System Gates, Configuration Memory, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
M1AFS600-FG484
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$185 / 개
데이터시트 보기 →M1AFS600-FG484I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →M1AFS600-FGG484I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$128.4 / 개
데이터시트 보기 →M1AFS600-1FG484I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$425 / 개
데이터시트 보기 →M1AFS600-1FGG484K
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$155 / 개
데이터시트 보기 →M1AFS600-2FG484
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$141.9 / 개
데이터시트 보기 →M1AFS600-2FG484I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$97.6 / 개
데이터시트 보기 →M1AFS1500-FG484K
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1327.1 / 개
데이터시트 보기 →M1AFS600-FG484K 최대 정격 & 전기적 특성
| Family | Fusion (Mixed-Signal Flash FPGA) |
| System Gates | 600000 gates |
| User I/Os | 172 |
| Logic Elements / Registers | 110592 |
| Processor Core | ARM Cortex-M1 (hard core) |
| Technology | Flash-based (non-volatile configuration) |
| 패키지 | 484-BGA (484-FBGA) |
| 실장 유형 | Surface Mount |
| Supplier Device Package | 484-BGA |
| Programming Type | In-system programmable via on-chip Flash |
M1AFS600-FG484K 484-bga 핀 구성 가이드
M1AFS600-FG484K(484-bga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: M1AFS600-FG484K.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
M1AFS600-FG484K 적합 용도: 6 애플리케이션s: Industrial Automation Control, Portable and Battery-Powered Instruments, Medical Equipment Control Boards, Secure Embedded Controllers, Mixed-Signal Data Acquisition Systems, Aerospace-Adjacent and Ruggedized Ground Systems.
Industrial Automation Control
The M1AFS600-FG484K fits industrial automation because its 600K-gate flash fabric absorbs glue logic, PWM engines, encoder interfaces, and safety state machines while the ARM Cortex-M1 hard core supervises the process. Flash configuration gives instant-on startup after power interruption - critical in factory equipment that must resume deterministically. The Fusion family's integrated voltage and temperature monitoring supports board-level health checks without extra supervisor ICs, cutting BOM cost. Place it as the central controller between field I/O and backplane interfaces; the 172 user I/Os span multiple banks for mixed-voltage connectivity. For harsh floor environments above commercial range, substitute the pin-compatible industrial M1AFS600-FG484I instead.
추천
Portable and Battery-Powered Instruments
Flash-based FPGAs such as the M1AFS600-FG484K are well suited to portable instrumentation because the non-volatile fabric eliminates external configuration flash and supports low static-power operation typical of Microsemi flash devices. In handheld analyzers and field meters, the 600K-gate capacity implements display controllers, sensor aggregation, and DSP pre-processing, while the ARM Cortex-M1 runs the user interface firmware on the same die. Instant-on behavior means measurements begin immediately at power-up, an advantage over SRAM FPGAs that need millisecond-scale configuration. The 484-FBGA footprint offers high integration in a compact board area; the commercial-grade K variant suits controlled portable environments.
추천
Medical Equipment Control Boards
The M1AFS600-FG484K serves medical diagnostics and monitoring equipment where deterministic, instant-on behavior and secure configuration matter. The flash fabric resists bitstream interception better than SRAM-programmed devices, supporting designs with data-integrity considerations, and the ARM Cortex-M1 core isolates patient-interface firmware from acquisition logic implemented in the 600K gates. On-chip mixed-signal monitoring assists power-rail supervision required in care-continuity equipment. Designs should use the industrial-grade M1AFS600-FG484I drop-in sibling when ambient specifications exceed the commercial range. With 172 user I/Os across multiple banks, the device interfaces sensor front ends, displays, and communication modules on one controller board.
추천
Secure Embedded Controllers
Security-oriented embedded controllers benefit from the M1AFS600-FG484K's flash-based configuration, which stores the bitstream on-chip rather than in an external device vulnerable to readout. The Fusion fabric combined with the ARM Cortex-M1 lets designers partition cryptographic accelerators in logic and key management firmware on the processor, all within one 484-FBGA package. Instant-on configuration removes the window during which SRAM FPGAs are blank and unauthenticated. The 600K-gate density accommodates AES-class logic plus interface bridges, while 172 user I/Os connect tamper sensors and communication PHYs. This makes the part a fit for secure gateways, licensing dongles, and protected industrial nodes.
추천
Mixed-Signal Data Acquisition Systems
Data acquisition systems leverage the Fusion family's distinguishing feature: analog mixed-signal peripherals integrated alongside the digital flash fabric, so voltage and temperature monitoring happens on the same die as the digital front-end logic. The M1AFS600-FG484K implements acquisition sequencing, trigger engines, and FIFO management in its 600K gates while the ARM Cortex-M1 runs calibration and communication stacks. The 484-FBGA package provides enough user I/Os - 172 - to fan in multiple sensor channels and fan out to host interfaces. For designs requiring wider environmental coverage, the pin-compatible industrial variant maintains footprint compatibility, protecting the PCB investment across product tiers.
추천
Aerospace-Adjacent and Ruggedized Ground Systems
While radiation-rated RTAX parts serve flight hardware, the M1AFS600-FG484K fits ruggedized ground support equipment and test benches that validate space electronics. Flash configuration tolerates vibration and power cycling without reconfiguration hardware, and the 600K-gate fabric emulates bus protocols and generates stimulus patterns for RTAX-family device testing. The ARM Cortex-M1 core orchestrates test sequences while the fabric handles real-time timing. The 484-FBGA's 172 user I/Os support parallel test vectors to multiple devices under test. For extended temperature chambers, the industrial M1AFS600-2FG484I drop-in sibling preserves the same PCB footprint with a faster speed grade option.
추천
추천 제품 요약
엔지니어링 참조 데이터: M1AFS600-FG484K — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | M1AFS600-FG484I | M1AFS600-FGG484I | M1AFS600-2FG484 | M1AFS1500-FG484K |
|---|---|---|---|---|---|
| Package | 484-FBGA | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600000 | 600000 | 600000 | 600000 | 1500000 |
| Temperature Grade | Commercial (K) | Industrial (I) | Industrial (I) | Commercial | Commercial (K) |
| Processor Core | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 | ARM Cortex-M1 |
| Configuration Technology | On-chip Flash (non-volatile) | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash |
주요 차별점
- ARM Cortex-M1 hard processor integrated (vs A3P600-1FG484)
- Industrial-grade drop-in availability (vs M1AFS600-FG484I)
- In-place density migration path (vs M1AFS1500-FG484K)
- Non-volatile flash configuration (vs SRAM FPGAs (Xilinx/Altera equivalents))
설계 노트
Estimate power early using Microchip/Microsemi Libero SoC SmartPower, since flash FPGA static current differs from SRAM FPGA leakage and depends on temperature and toggling activity. Multi-bank I/O means each bank needs its own decoupling: place at least one 0.1 uF ceramic per I/O bank supply pin pair plus bulk 10 uF near the regulator. Verify power-rail sequencing requirements in the Fusion datasheet before sharing regulators with other rails.
The 484-FBGA footprint is a fine-pitch area-array package; define the land pattern exactly per the manufacturer's package drawing and inspect with X-ray after reflow, since collapsed balls under the array are invisible optically. Fan out using via-in-pad or dog-bone escape patterns with 0.2-0.3 mm microvias on inner layers. Connect the die-attached thermal balls to a ground pour rather than leaving them floating, improving heat spreading without a heatsink.
The K suffix on M1AFS600-FG484K denotes a commercial temperature grade - do not deploy it in industrial enclosures; substitute the pin-compatible M1AFS600-FG484I instead. Second, although configuration is on-chip flash, do not omit the JTAG programming header - field updates and debug depend on it. Third, I/O bank voltage constraints in Libero must be validated before board sign-off; mixing incompatible bank voltages on shared rails causes damage not protected by clamps.
규정 준수 정보
Compliance status not stated in the retrieved distributor data; confirm RoHS/REACH on the Microchip product page or material declaration report.
