M29F800FT55M3E2 - 8Mbit 55ns 5V Parallel NOR Flash | Micron
부품 번호: M29F800FT55M3E2 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.2 | $6.20 |
| 10 | $5.62 | $56.20 |
| 100 | $4.95 | $495.00 |
| 500 | $4.48 | $2,240.00 |
| 1,000 | $3.95 | $3,950.00 |
M29F800FT55M3E2 개요
Parallel NOR Flash is a nonvolatile memory technology in which the memory array is addressed directly over a parallel address and data bus, allowing the CPU to execute code in place (XIP) without first copying it to RAM. In the memory hierarchy, it sits alongside SRAM and DRAM as a memory IC, distinguished by nonvolatility, high read reliability, and low bit-level random-access latency. NOR is chosen over NAND when random byte-level reads and code execution matter more than raw density.
Key features of the M29F800FT55M3E2 include embedded byte/word program and erase algorithms that offload timing control from the host MCU, erase suspend and resume modes that allow the CPU to read from other blocks while an erase is in progress, and low standby power consumption with an automatic standby mode. The device guarantees 100,000 program/erase cycles per block, and electronic signature identification allows software to query manufacturer and device codes. The T suffix denotes a top boot block architecture, which protects the boot code sector located at the top of the address map.
Technically, the device operates from a single 5V VCC for both read and program/erase operations, simplifying power design in legacy 5V industrial and automotive systems. The 55 ns access time supports zero-wait-state operation with many 16-bit microcontrollers and microprocessors. The E suffix in the ordering code indicates a RoHS-compliant package, and the 3 speed/grade digit denotes the 125C Auto Grade temperature rating.
Typical applications include boot code storage in automotive ECUs, industrial control and motor drive systems, telecom line cards, and embedded instrumentation where code is executed in place from Flash over a 16-bit bus.
When designing with this part, ensure address and data bus traces are length-matched for the 55 ns timing budget, and implement the software data protection algorithms exactly as described in the datasheet command set.
This page synthesizes verified distributor data, drop-in alternatives, and design guidance not found in the manufacturer datasheet alone.
드롭인 대체품: M29F800FT55M3E2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: M29F800FT55M3E2 (동일 폼 팩터 및 풋프린트) — 차이점: Organization, Density, Package, RoHS Status, Memory Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
M29F800FB55M3E2
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.01 / 개
데이터시트 보기 →M29F800FT70M3E2
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
M29F800FB70M3E2
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
M29F800FT55M3E2 사양
| 메모리 유형 | NOR Flash |
| 메모리 크기 | 8 Mbit |
| 메모리 구성 | 512K x 16 bit |
| 인터페이스 | Parallel |
| Access Time | 55 ns |
| 공급 전압 | 5 V |
| 동작 온도 | -40C to +125C |
| Boot Block Location | Top boot block |
| Program/Erase Cycles | 100,000 per block |
| Program Algorithm | Embedded byte/word program |
| Erase Features | Erase suspend and resume |
| Standby Mode | Automatic standby, low power |
| Identification | Electronic signature |
| 패키지 | 44-SO (SOP) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant (E suffix) |
| Density | 8389 kbits |
M29F800FT55M3E2 44-so (sop) 핀 구성 가이드
M29F800FT55M3E2(44-so (sop) 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: M29F800FT55M3E2.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
M29F800FT55M3E2 적합 용도: 6 애플리케이션s: Automotive ECU Boot Code Storage, Industrial Control and PLC Systems, Telecom Line Cards, Embedded Instrumentation and Test Equipment, Security and Access Control Panels, Set-Top Box and Consumer Display Firmware.
Automotive ECU Boot Code Storage
The M29F800FT55M3E2 fits automotive ECU boot storage because its Auto Grade 3 rating guarantees operation from -40C to +125C and its top boot block keeps reset vectors in a protected sector. In a 5V ECU, the 512K x 16 array is mapped to the MCU external bus for execute-in-place booting, with the 55 ns access time supporting zero-wait-state fetches. The embedded program/erase controller and 100,000 cycle endurance allow safe field firmware updates, and erase suspend lets the CPU service interrupts during reflashing.
추천
Industrial Control and PLC Systems
In PLC and motor-drive controllers, the M29F800FT55M3E2 stores control firmware on legacy 5V buses where its single 5V supply removes level-shifting complexity. The 55 ns parallel access keeps scan-cycle code execution deterministic, while the -40C to +125C range tolerates cabinet temperature extremes. Automatic standby reduces system quiescent power during idle periods. Designers place the device on the MCU external memory interface with embedded byte/word programming handling all Flash timing internally, freeing the host CPU from managing program algorithms.
추천
Telecom Line Cards
Telecom line cards use the M29F800FT55M3E2 to hold boot and diagnostics code that must be resident at power-up. The 8 Mbit capacity covers a bootloader plus a compressed application image, and the electronic signature feature lets the card firmware query the device identity during POST self-test. The 44-SO surface-mount package supports automated assembly on dense cards, and erase suspend/resume allows in-field image updates while the card continues servicing traffic from unaffected blocks of the array.
추천
Embedded Instrumentation and Test Equipment
Bench instruments and data acquisition systems deploy the M29F800FT55M3E2 for firmware and calibration table storage. NOR random-access behavior lets the processor fetch lookup tables byte-by-byte with 55 ns latency, and the 100,000 cycle per block endurance accommodates periodic calibration rewrites. The -40C to +125C rating covers unheated test fixtures, while automatic standby trims power in battery-operated portable instruments. Erase suspend ensures display refresh or communication tasks proceed uninterrupted during a block erase.
추천
Security and Access Control Panels
Access control and alarm panels benefit from the M29F800FT55M3E2's nonvolatile code storage and top boot block protection, which shields the security bootloader from accidental overwrite during field updates of application code. Operation on a 5V rail matches the discrete logic commonly used in panel electronics, and the wide -40C to +125C range suits outdoor-rated enclosures. The 512K x 16 organization supports event log buffers and multiple credential databases alongside the main application image on one device.
추천
Set-Top Box and Consumer Display Firmware
Consumer set-top boxes and display controllers historically used the M29F800FT55M3E2 to hold boot ROM and firmware images. The 5V-tolerant parallel interface integrates directly with legacy 16-bit host processors, and the top boot block ensures the reset vector image is isolated. Embedded program algorithms permit USB or network firmware upgrades without external programming voltage. Designers pair the NOR with serial Flash for user settings, keeping frequently rewritten data off the endurance-limited NOR blocks to preserve the 100,000 cycle lifetime.
추천
추천 제품 요약
엔지니어링 참조 데이터: M29F800FT55M3E2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | M29F800FB55M3E2 | M29F800FT70M3E2 | M29F800FB70M3E2 |
|---|---|---|---|---|
| Package | 44-SO (SOP) | 44-SO (SOP) - same | 44-SO (SOP) - same | 44-SO (SOP) - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 8 Mbit (512K x 16) | 8 Mbit (512K x 16) | 8 Mbit (512K x 16) | 8 Mbit (512K x 16) |
| Access Time | 55 ns | 55 ns | 70 ns | 70 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Boot Block Location | Top boot | Bottom boot | Top boot | Bottom boot |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Program/Erase Cycles | 100,000 per block | 100,000 per block | 100,000 per block | 100,000 per block |
주요 차별점
- Fastest grade in the M29F800 44-SO family (vs M29F800FT70M3E2)
- Top boot block protects reset vectors (vs M29F800FB55M3E2)
- Automotive temperature range in a RoHS package (vs M29F800FB70M3E2)
설계 노트
With a 55 ns access time, the external bus timing budget is tight: address setup, CE# assertion, and data capture must all fit within the microcontroller wait-state configuration. Keep address and data bus traces under approximately 10 cm where possible, and series-terminate (~22 to 33 ohm) long lines to control ringing. Verify setup and hold margins across the -40C to +125C range using datasheet worst-case timing, not typical values.
Selecting the wrong boot block variant is the most common substitution error: M29F800FT (top boot) and M29F800FB (bottom boot) share the same pinout but place the protected sector at opposite ends of the address map. Firmware that assumes a top boot layout will jump to invalid code on an FB part. Always confirm the boot position against your bootloader's address assumptions before qualifying a replacement.
The device runs from a single 5V rail shared by read and program/erase operations. Provide adequate decoupling (at least 0.1 uF ceramic at VCC pins plus bulk capacitance) because program/erase operations draw transient currents that can disturb other 5V logic on the same rail. Verify the 5V regulator can support the erase peak current during firmware field updates while the rest of the system is active.
규정 준수 정보
RoHS compliance indicated by the E suffix in the ordering code per the Micron part numbering decoder. AEC-Q100 qualification status not explicitly stated in provided data; the Auto Grade 3 (125C) rating supports automotive temperature requirements.
