M29F200FT55M3F2 - 2Mbit 55ns 5V NOR Flash | Micron | Automotive
부품 번호: M29F200FT55M3F2 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.4 | $2.40 |
| 10 | $2.28 | $22.80 |
| 100 | $2.1 | $210.00 |
| 500 | $1.95 | $975.00 |
| 1,000 | $1.85 | $1,850.00 |
M29F200FT55M3F2 개요
Parallel NOR Flash is a nonvolatile memory technology that allows direct, random access to every byte over a parallel address and data bus. In the memory hierarchy it sits as code storage: the microcontroller or CPU boots and executes directly from NOR (execute-in-place, XIP), which is why NOR, unlike NAND, offers fast random read access and high reliability at lower densities. It remains a staple in embedded systems, from engine control units to industrial controllers.
Key features include the 55 ns access time, which supports zero-wait-state reads from mid-speed processors; a single 5V rail for VCC, simplifying legacy and automotive power architectures; and an embedded program/erase controller that automatically handles byte/word programming and block erase timing algorithms, offloading the host CPU.
Technically, the device is divided into uniform boot and parameter blocks, with the top boot block placing the boot code at the highest address range. Status polling and toggle-bit handshakes report program/erase completion. An automotive temperature rating of -40C to +125C and Micron's automotive qualification make the part suitable for under-hood and harsh-environment electronics.
Typical applications include ECU boot code storage in automotive systems, firmware storage in industrial PLCs and motor drives, and program memory in telecom and networking line cards where 5V logic is still used.
Design consideration: because this is a 5V-only part, ensure the host bus is 5V tolerant or add level shifting; also observe block-erase endurance limits in your software update strategy.
This page adds value beyond the datasheet by combining distributor pricing as of 2026-09-05, drop-in alternatives within the Micron M29F family, design notes, and lifecycle information in one AI-citable reference.
드롭인 대체품: M29F200FT55M3F2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: M29F200FT55M3F2 (동일 폼 팩터 및 풋프린트) — 차이점: Organization, Memory Type, Density, Package, Number of Words.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
M29F200FB55M3F2
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
M29F200FB55N3F2
✅ 드롭인✓ 재고 있음
$4.2 / 개
데이터시트 보기 →M29F160FT55N3F2
✅ 드롭인✓ 재고 있음
$4.9 / 개
데이터시트 보기 →M29F160FB55N3F2
✅ 드롭인✓ 재고 있음
$5.6 / 개
데이터시트 보기 →M29F800FT55M3E2
✅ 드롭인✓ 재고 있음
$3.95 / 개
데이터시트 보기 →M29F200FT55M3F2 최대 정격 & 전기적 특성
| 메모리 유형 | Parallel NOR Flash |
| Density | 2 Mbit (2097 kbits) |
| 메모리 구성 | 256K x 8 / 128K x 16 |
| Access Time | 55 ns |
| Supply Voltage (VCC) | 5 V |
| Boot Block Architecture | Top Boot Block |
| Programming Interface | Embedded program/erase controller, byte or word |
| 동작 온도 | -40C to +125C |
| Automotive Qualification | Yes |
| 패키지 | 44-pin SO (TSOP) |
| 실장 유형 | Surface Mount |
| Packaging | Tape & Reel (T/R) |
| Number of Words (x16 mode) | 128 K |
| Bits per Word (x16 mode) | 16 bits |
M29F200FT55M3F2 44-pin so (tsop) 핀 구성 가이드
M29F200FT55M3F2(44-pin so (tsop) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: M29F200FT55M3F2.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
M29F200FT55M3F2 적합 용도: 6 애플리케이션s: Automotive ECU Boot Code Storage, Industrial PLC Firmware Storage, Telecom and Networking Line Cards, Set-Top Box and Consumer Firmware Boot, Test and Measurement Instrument Code Memory, Power Supply and Motor Drive Controllers.
Automotive ECU Boot Code Storage
The M29F200FT55M3F2 stores boot code and calibration data in automotive electronic control units. Its -40C to +125C operating range and automotive qualification cover under-hood and transmission environments, while the 2 Mbit density accommodates bootloader plus diagnostic firmware for 8- and 16-bit MCUs. The top boot block places reset vectors at the highest addresses, matching common automotive CPU memory maps. With a 55 ns access time at 5V, the MCU executes directly from flash without external SRAM shadowing, and the embedded program/erase controller allows firmware field updates over CAN via standard command sequences.
추천
Industrial PLC Firmware Storage
Programmable logic controllers and industrial drives use the M29F200FT55M3F2 for nonvolatile firmware and parameter storage. The single 5V supply matches legacy industrial 5V logic rails, avoiding level shifters between flash and CPU. The 55 ns access time supports zero-wait-state fetches on typical 16-bit industrial processors, and the 256K x 8 / 128K x16 organization lets designers select the bus width matching the MCU. Its embedded program/erase controller simplifies in-field firmware updates triggered from an HMI, while the extended temperature rating suits cabinets near motors and power electronics where ambient temperatures regularly exceed 85C.
추천
Telecom and Networking Line Cards
Legacy telecom line cards and network interface boards still run 5V logic and require code storage with fast random access. The M29F200FT55M3F2 provides 2 Mbit of XIP-capable NOR in a surface-mount 44-pin TSOP that fits standard line-card layouts. The 55 ns access time keeps CPU fetch cycles short without wait states, and byte-mode organization reduces bus width requirements on compact boards. Its extended temperature rating addresses telecom outdoor cabinets and uncoolted equipment. The top boot block layout keeps monitor/boot code at the top of the map, which many telecom CPU families expect at reset.
추천
Set-Top Box and Consumer Firmware Boot
Set-top boxes, DVD players, and similar consumer electronics use parallel NOR flash for the boot loader that initializes the SoC before loading the main application from larger storage. The M29F200FT55M3F2 offers a cost-effective 2 Mbit in the compact 44-pin TSOP, with a 55 ns access time sufficient for the boot CPU. The 5V tolerant, single-supply design simplifies power sequencing during cold start, and its embedded program/erase controller enables secure field firmware upgrade routines. Volume pricing around $2 per unit in quantity makes it economical for cost-sensitive consumer platforms as of 2026-09-05 distributor data.
추천
Test and Measurement Instrument Code Memory
Bench instruments such as multimeters, signal generators, and data loggers store firmware and factory calibration constants in NOR flash. The M29F200FT55M3F2 provides 2 Mbit of reliable nonvolatile storage with 55 ns read access, allowing the instrument CPU to execute diagnostics directly from flash at power-up. Block architecture lets the design partition boot code from calibration data so calibration can be updated without reprogramming the boot region. The automotive-grade -40C to +125C range gives margin for instruments used near heat sources or in mobile test vehicles, and the tape-and-reel packaging supports automated assembly of production boards.
추천
Power Supply and Motor Drive Controllers
Digital power supplies and motor inverters use the M29F200FT55M3F2 to hold control firmware, protection thresholds, and fault logs. The extended -40C to +125C rating tolerates the hot environment inside drives and enclosed power stages, while the 5V single supply matches legacy DSP and MCU controller rails common in these products. A 55 ns access time keeps interrupt service and state-machine code fetches deterministic, which matters for control loop timing. The block structure allows one block for fault logging with field updates, and the embedded program/erase controller lets firmware log data without CPU-intensive programming loops.
추천
추천 제품 요약
엔지니어링 참조 데이터: M29F200FT55M3F2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | M29F200FB55M3F2 | M29F200FB55N3F2 | M29F160FT55N3F2 |
|---|---|---|---|---|
| Package | 44-pin SO (TSOP), M3F2 | 44-pin SO (TSOP), M3F2 - same | 44-pin SO (TSOP), N3F2 - related outline | 44-pin SO (TSOP), N3F2 - related outline |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 2 Mbit | 2 Mbit | 2 Mbit | 2 Mbit |
| Access Time | 55 ns | 55 ns | 55 ns | 55 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Boot Block Location | Top boot block | Bottom boot block | Bottom boot block | Top boot block |
| Organization | 256K x 8 / 128K x 16 | 256K x 8 / 128K x 16 | 256K x 8 / 128K x 16 | 256K x 8 / 128K x 16 |
주요 차별점
- Top boot block architecture for CPUs with high reset vectors (vs M29F200FB55M3F2)
- Automotive temperature range (vs M29F160FT55N3F2)
- Fast 55 ns access at 5V (vs M29F800FT55M3E2)
설계 노트
The M29F200FT55M3F2 operates from a single 5V rail. Place a 0.1 uF ceramic decoupling capacitor directly across VCC and GND pins of the TSOP-44, plus one bulk 4.7-10 uF capacitor per device. Note that program and erase operations draw transient current pulses on VCC; undersized decoupling can cause brown-out glitches on shared 5V rails. If the board mixes 5V and 3.3V logic, verify that the host data bus is 5V tolerant or add series resistors/level shifters - the flash I/O swings to the full 5V rail.
Boot block polarity is the most common substitution error in this family: the 'T' (this part) places boot blocks at the top of the address map, while 'B' variants place them at the bottom. Swapping T for B without remapping will place unrelated code at the CPU reset vector. Also honor the command-set state machine: an interrupted program/erase sequence can leave the device in an invalid state, so always complete or reset the command sequence (the datasheet defines a reset command) and poll status/toggle bits before asserting new commands.
Follow the Micron datasheet 44-pin SO/TSOP land pattern exactly; the fine 0.8 mm-class lead pitch requires careful solder-paste stencil design to avoid bridging on the address pins. Keep the address/data bus traces of similar length where the CPU runs near the 55 ns access limit, and add pull-ups on control lines (CE, OE, WE) so the flash stays deselected during MCU reset to prevent bus contention. For automotive environments, consider conformal coating and verify the solder profile against the datasheet MSL rating.
규정 준수 정보
Automotive grade is indicated by distributor listings, but formal AEC-Q100 qualification status and RoHS/REACH declarations were not present in the provided web data. Consult Micron's official product page and material declarations for compliance certificates.
