MC9S08PA16AVTJ - 8-Bit 20MHz 16KB Flash MCU | NXP
부품 번호: MC9S08PA16AVTJ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC9S08PA16AVTJ 개요
An 8-bit MCU is a microcontroller optimized for control-oriented tasks rather than high-throughput computing. It sits within the embedded-control hierarchy: MCU -> 8-bit microcontroller -> S08 core -> semiconductor. MC9S08PA16AVTJ is intended for applications that require modest processing performance, deterministic peripheral control, and low system complexity. Its 20 MHz bus operation provides a practical balance between response time and power consumption, while 16 KB of flash supports embedded firmware storage for compact control products.
Key features include the S08 core, 20 MHz maximum bus frequency, 16 KB flash memory, and operation from 2.7 V to 5.5 V. The family documentation also describes integrated analog functionality and configurable port drive behavior. The V-temperature variant is specified for operation from -40 °C to 105 °C, making it suitable for automotive environments where extended temperature capability is required. The 20-pin TSSOP package supports compact PCB layouts and automated manufacturing.
Typical applications include automotive body and accessory control, small motor or actuator controllers, sensor conditioning, keypad interfaces, and compact embedded systems. The MCU is useful when a product needs automotive-oriented documentation, low-power operation, analog integration, and a small package without a high-end Cortex-M processor. Firmware developers can use the S08 family toolchain and reference materials rather than treating the device as a conventional general-purpose MCU.
A key design consideration is confirming the exact pinout, peripheral availability, and electrical limits for the AVTJ ordering variant against the MC9S08PA16 datasheet before layout release. Automotive designs should also account for transient protection, grounding, decoupling, and validation across temperature and supply ranges. This page summarizes verified manufacturer and distributor information and clearly identifies data that requires confirmation before production use.
드롭인 대체품: MC9S08PA16AVTJ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S08PA16AVTJ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Debug Interface, ADC, Core Architecture, Flash Memory.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S08PA16AMTJ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08PT16VTJ
✅ 드롭인✓ 재고 있음
$1.89 / 개
데이터시트 보기 →MC9S08QG8CDTE
✅ 드롭인✓ 재고 있음
$2.65 / 개
데이터시트 보기 →MC9S08SH16MTJ
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →S9S08RN16W2VTJ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08PA16AVTG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08PA16AVTJ 최대 정격 & 전기적 특성
| Core | S08 8-bit CISC core |
| Maximum Bus Frequency | 20 MHz |
| Flash Memory | 16 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| V-Part Operating Temperature | -40 °C to 105 °C |
| M-Part Operating Temperature | -40 °C to 125 °C |
| 패키지 | 20-pin TSSOP |
| 실장 유형 | Surface Mount |
| Architecture | 8-bit embedded MCU |
| Program Memory Type | Flash |
| Application Category | Cost-sensitive automotive embedded control |
| Analog Integration | Integrated analog functionality |
| Port Drive Control | Software-selectable alternative drive strengths on supported high-current port pins |
| Data Bus | Single-chip embedded bus |
| Manufacturer | NXP Semiconductors |
| 수명 주기 상태 | Active |
| Datasheet Revision | MC9S08PA16_Rev.1 |
| 핀 수 | 20 pins |
MC9S08PA16AVTJ 20-pin tssop 핀 구성 가이드
MC9S08PA16AVTJ(20-pin tssop 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S08PA16AVTJ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S08PA16AVTJ 적합 용도: 6 애플리케이션s: Automotive Body Control, Small Motor and Actuator Control, Sensor and Signal Conditioning, Keypad and Human Interface Control, Power and Battery Management Module, Compact Automotive Accessory Module.
Automotive Body Control
The MC9S08PA16AVTJ suits compact automotive body-control tasks where an 8-bit S08 core, 16 KB of flash, and a 20-pin TSSOP package are sufficient. It can manage switch inputs, lamp outputs, simple interlocks, and diagnostic I/O without a larger processor. The family datasheet identifies the V-temperature option from -40 °C to 105 °C, which is relevant to automotive environments, although production suitability still requires confirmation of qualification, transient protection, EMC, and supply-bus requirements.
추천
Small Motor and Actuator Control
For compact motor, valve, latch, or actuator modules, the MC9S08PA16AVTJ provides a cost-sensitive 8-bit control platform with up to 20 MHz operation. Its integrated analog functionality and configurable output-drive behavior can support sensing and driving functions when the selected pins and peripheral configuration match the design. The MCU is best suited to modest control loops and deterministic state machines; motor current, protection, flyback paths, and thermal design remain board-level responsibilities.
추천
Sensor and Signal Conditioning
The MC9S08PA16AVTJ can be used in compact sensing modules where a low-cost 8-bit MCU must read analog or digital inputs, apply filtering, and report a control result. Its S08 core operates up to 20 MHz, providing enough throughput for basic acquisition and decision logic while keeping system complexity low. Analog accuracy, input channels, sampling behavior, and calibration limits must be verified against the full MC9S08PA16 datasheet for the exact ordering variant before production release.
추천
Keypad and Human Interface Control
In keypad, panel, and simple user-interface modules, the MC9S08PA16AVTJ can scan inputs, debounce contacts, update indicators, and manage low-power behavior in a compact 20-pin TSSOP package. The 16 KB flash capacity is suitable for firmware focused on debouncing, state management, and communication rather than graphics or heavy networking. Designers should confirm pin multiplexing, port-drive requirements, and programming support in the family datasheet while keeping the MCU supply and ground layout clean.
추천
Power and Battery Management Module
The MC9S08PA16AVTJ can serve as the supervisory controller in a small power or battery module, handling voltage-state inputs, load sequencing, fault flags, and communication with a higher-level controller. Its 2.7 V to 5.5 V operating range supports systems in that supply window, while the 8-bit architecture favors simple supervisory logic over complex algorithms. Actual charger, protection, load-switch, and battery-management requirements should be implemented with dedicated hardware where necessary and verified through application testing.
추천
Compact Automotive Accessory Module
MC9S08PA16AVTJ is a practical candidate for small automotive accessory modules that require local I/O control, event handling, and diagnostic-style status reporting. Its 20-pin TSSOP package limits board area, while the S08 core and 16 KB flash provide a straightforward firmware platform for compact control functions. The design must still include appropriate reverse-battery, load-dump, ESD, transient, and EMC protection, and the final product should verify automotive qualification requirements for the exact part number and manufacturing site.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08PA16AVTJ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08PA16AMTJ | MC9S08PT16VTJ | MC9S08QG8CDTE |
|---|---|---|---|---|
| Target Application | Cost-sensitive automotive embedded control | Automotive-oriented same-family candidate | Embedded HCS08L application candidate | Embedded S08-family application candidate |
| Manufacturer | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
주요 차별점
- Documented 16 KB flash and 20 MHz operation in a 20-pin TSSOP package (vs MC9S08PT16VTJ)
- Automotive-oriented NXP positioning (vs MC9S08QG8CDTE)
- Same-family temperature-grade comparison (vs MC9S08PA16AMTJ)
- Verified family documentation (vs MC9S08SH16MTJ)
설계 노트
Keep the MC9S08PA16AVTJ supply inside the family datasheet operating range of 2.7 V to 5.5 V. Place the required bypass capacitors close to the device supply pins and validate startup, ripple, and load-transient behavior across the full product temperature range. In an automotive module, add reverse-polarity, ESD, and transient protection ahead of the MCU; the controller's supply rating is not a substitute for a complete vehicle power-front-end design.
Use the official MC9S08PA16 pin table and package drawing before routing the PCB. The verified web data confirms a 20-pin TSSOP package but does not provide the complete pin mapping, so do not infer signals from generic S08 layouts. Confirm power, ground, reset, programming, clock, and port assignments for the AVTJ suffix. Maintain short return paths and follow the manufacturer's decoupling and layout recommendations to avoid analog and digital noise coupling.
Do not treat a related MC9S08 or HCS08L part as interchangeable merely because it is an 8-bit MCU with a similar package name. Verify flash size, memory map, peripheral assignments, voltage limits, temperature grade, automotive qualification, debug/programming support, and software compatibility. The supplied cross-reference data identifies candidates but does not prove pin-to-pin compatibility, so each substitution requires schematic review, firmware testing, and production qualification.
The MCU's operating temperature grade is -40 °C to 105 °C for the V part, while the M family option extends to 125 °C. Do not infer the junction-temperature rating, power dissipation, or package thermal performance from the ordering suffix alone. Use the exact datasheet thermal data and the PCB's copper and enclosure conditions when checking ambient rise. Automotive products should also verify temperature rise at the worst-case supply, switching activity, and I/O load.
규정 준수 정보
The verified sources identify the product as automotive-oriented and active, but do not provide extracted RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm compliance documents with NXP before production procurement.
