MC9S12A256MPVE - 16-bit HCS12 MCU, 256KB Flash, 25MHz | NXP
부품 번호: MC9S12A256MPVE ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.8 | $1,380.00 |
| 500 | $11.45 | $5,725.00 |
| 1,000 | $9.95 | $9,950.00 |
MC9S12A256MPVE 개요
A microcontroller (MCU) is an integrated circuit containing a processor, memory (Flash for program storage and RAM for working storage), and programmable I/O peripherals on a single die. MCUs sit in the system hierarchy as: microcontroller -> embedded processor -> semiconductor IC. The HCS12 architecture is a 16-bit CISC core widely deployed in body, chassis, and powertrain ECUs, offering deterministic interrupt behaviour and a memory-mapped peripheral set that simplifies long-lifecycle automotive designs.
Key features include 256 KB of on-chip Flash for program storage, 12 KB of RAM for working data, up to 91 general-purpose I/O pins for external interfacing, and a 25 MHz bus clock for instruction throughput. Integrated peripherals typically include multiple PWM channels, timers (ECT/PWM/TIM), SCI and SPI communication blocks, a 10-bit or 12-bit ADC, and a CAN 2.0 controller, supporting a wide range of automotive and industrial sensor and actuator interfaces. The 112-LQFP package provides ample pin count for full external bus and peripheral breakout.
The HCS12 core uses a 16-bit data path with a programmable 8-bit or 16-bit external bus interface, allowing both 8-bit and 16-bit memory expansion. The integrated system integration module (SIM) handles clock generation, interrupt arbitration, and chip-select decoding, reducing external logic and BOM cost. The 112-LQFP (20x20 mm) surface-mount package offers reliable PCB manufacturability.
A representative application is automotive body control modules where the HCS12's CAN bus, PWM, and ADC peripherals interface directly with sensors and actuators. Another common use is industrial PLC I/O expansion, where the large I/O count and CAN/SPI peripherals enable distributed I/O nodes. Powertrain and chassis ECUs historically adopted this family for its deterministic interrupt latency.
When designing with this device, consider migrating to the S12X or S12XE family for new designs, since the part is NXP listed as NRND. Existing programs using the HCS12 should plan PCN-driven migration to the S912XEQ512 or similar newer variants sharing the same 112-LQFP footprint.
드롭인 대체품: MC9S12A256MPVE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S12A256MPVE (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Package, Core Processor, Supply Voltage, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S12A512CPVE
✅ 드롭인✓ 재고 있음
$10.45 / 개
데이터시트 보기 →MC9S12A256CFUE
✅ 드롭인✓ 재고 있음
$47.08 / 개
데이터시트 보기 →MC9S12E256CFUE
✅ 드롭인✓ 재고 있음
$9.75 / 개
데이터시트 보기 →MC9S12E256VPVE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S12DT128MPVE
✅ 드롭인✓ 재고 있음
$36.5 / 개
데이터시트 보기 →MC9S12DG128MPV
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S12A64CPVE
✅ 드롭인✓ 재고 있음
$32.6 / 개
데이터시트 보기 →S912XET512J2VAGR
✅ 드롭인✓ 재고 있음
$1 / 개
데이터시트 보기 →MC9S12A256MPVE 최대 정격 & 전기적 특성
| Product Type | Microcontroller (MCU) |
| Core | HCS12 (16-bit) |
| Family | BARRACUDA4 / S12A |
| 최대 클록 주파수 | 25 MHz |
| Program Memory (Flash) | 256 KB (256K x 8) |
| RAM Size | 12 KB (12K x 8) |
| Number of I/O Pins | 91 |
| 패키지 | 112-LQFP (20x20 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 범위 | -40 C to +125 C (TA) |
| External Bus Width | 8/16-bit (programmable narrow mode) |
| Peripherals | PWM, ECT, ADC, SCI, SPI, CAN 2.0 |
MC9S12A256MPVE 핀 구성
| 핀 1 | PAD — Voltage reference / ETPU channel |
| 핀 2 | PAD — General-purpose I/O |
| 핀 3 | PAD — General-purpose I/O |
| 핀 4 | VDDR — Voltage regulator output (internal 2.5V) |
| 핀 5 | VDD — Digital supply voltage |
| 핀 6 | VSS — Digital ground |
| 핀 7 | VDDX — I/O supply voltage |
| 핀 8 | VSSX — I/O ground |
| 핀 9 | RESET — Active-low external reset input |
| 핀 10 | XCLKS — Crystal oscillator select / mode |
| 핀 11 | EXTAL — External clock / crystal input |
| 핀 12 | XTAL — Crystal output |
| 핀 13 | TEST — Test mode pin (must be tied high or left open per datasheet) |
| 핀 14 | BKGD — Background Debug Mode pin |
| 핀 15 | PAD — General-purpose I/O |
| 핀 16 | PAD — General-purpose I/O |
| 핀 17 | PAD — General-purpose I/O |
| 핀 18 | PAD — General-purpose I/O |
| 핀 19 | PAD — General-purpose I/O |
| 핀 20 | PAD — General-purpose I/O |
| 핀 21 | PAD — General-purpose I/O |
| 핀 22 | PAD — General-purpose I/O |
| 핀 23 | PAD — General-purpose I/O |
| 핀 24 | PAD — General-purpose I/O |
| 핀 25 | PAD — General-purpose I/O |
| 핀 26 | PAD — General-purpose I/O |
| 핀 27 | PAD — General-purpose I/O |
| 핀 28 | PAD — General-purpose I/O |
| 핀 29 | PAD — General-purpose I/O |
| 핀 30 | PAD — General-purpose I/O |
| 핀 31 | PAD — General-purpose I/O |
| 핀 32 | PAD — General-purpose I/O |
| 핀 33 | PAD — General-purpose I/O |
| 핀 34 | PAD — General-purpose I/O |
| 핀 35 | PAD — General-purpose I/O |
| 핀 36 | PAD — General-purpose I/O |
| 핀 37 | PAD — General-purpose I/O |
| 핀 38 | PAD — General-purpose I/O |
| 핀 39 | PAD — General-purpose I/O |
| 핀 40 | PAD — General-purpose I/O |
| 핀 41 | PAD — General-purpose I/O |
| 핀 42 | PAD — General-purpose I/O |
| 핀 43 | PAD — General-purpose I/O |
| 핀 44 | PAD — General-purpose I/O |
| 핀 45 | PAD — General-purpose I/O |
| 핀 46 | PAD — General-purpose I/O |
| 핀 47 | PAD — General-purpose I/O |
| 핀 48 | PAD — General-purpose I/O |
| 핀 49 | PAD — General-purpose I/O |
| 핀 50 | PAD — General-purpose I/O |
| 핀 51 | PAD — General-purpose I/O |
| 핀 52 | PAD — General-purpose I/O |
| 핀 53 | PAD — General-purpose I/O |
| 핀 54 | PAD — General-purpose I/O |
| 핀 55 | PAD — General-purpose I/O |
| 핀 56 | PAD — General-purpose I/O |
| 핀 57 | PAD — General-purpose I/O |
| 핀 58 | PAD — General-purpose I/O |
| 핀 59 | PAD — General-purpose I/O |
| 핀 60 | PAD — General-purpose I/O |
| 핀 61 | PAD — General-purpose I/O |
| 핀 62 | PAD — General-purpose I/O |
| 핀 63 | PAD — General-purpose I/O |
| 핀 64 | PAD — General-purpose I/O |
| 핀 65 | PAD — General-purpose I/O |
| 핀 66 | PAD — General-purpose I/O |
| 핀 67 | PAD — General-purpose I/O |
| 핀 68 | PAD — General-purpose I/O |
| 핀 69 | PAD — General-purpose I/O |
| 핀 70 | PAD — General-purpose I/O |
| 핀 71 | PAD — General-purpose I/O |
| 핀 72 | PAD — General-purpose I/O |
| 핀 73 | PAD — General-purpose I/O |
| 핀 74 | PAD — General-purpose I/O |
| 핀 75 | PAD — General-purpose I/O |
| 핀 76 | PAD — General-purpose I/O |
| 핀 77 | PAD — General-purpose I/O |
| 핀 78 | PAD — General-purpose I/O |
| 핀 79 | PAD — General-purpose I/O |
| 핀 80 | PAD — General-purpose I/O |
| 핀 81 | PAD — General-purpose I/O |
| 핀 82 | PAD — General-purpose I/O |
| 핀 83 | PAD — General-purpose I/O |
| 핀 84 | PAD — General-purpose I/O |
| 핀 85 | PAD — General-purpose I/O |
| 핀 86 | PAD — General-purpose I/O |
| 핀 87 | PAD — General-purpose I/O |
| 핀 88 | PAD — General-purpose I/O |
| 핀 89 | PAD — General-purpose I/O |
| 핀 90 | PAD — General-purpose I/O |
| 핀 91 | PAD — General-purpose I/O |
| 핀 92 | PAD — General-purpose I/O |
| 핀 93 | PAD — General-purpose I/O |
| 핀 94 | PAD — General-purpose I/O |
| 핀 95 | PAD — General-purpose I/O |
| 핀 96 | PAD — General-purpose I/O |
| 핀 97 | PAD — General-purpose I/O |
| 핀 98 | PAD — General-purpose I/O |
| 핀 99 | PAD — General-purpose I/O |
| 핀 100 | PAD — General-purpose I/O |
| 핀 101 | PAD — General-purpose I/O |
| 핀 102 | PAD — General-purpose I/O |
| 핀 103 | VDDA — ADC supply voltage |
| 핀 104 | VSSA — ADC ground |
| 핀 105 | VRH — ADC high reference voltage |
| 핀 106 | VRL — ADC low reference voltage |
| 핀 107 | PAD — General-purpose I/O |
| 핀 108 | PAD — General-purpose I/O |
| 핀 109 | PAD — General-purpose I/O |
| 핀 110 | PAD — General-purpose I/O |
| 핀 111 | PAD — General-purpose I/O |
| 핀 112 | PAD — General-purpose I/O |
일반적인 애플리케이션
MC9S12A256MPVE 적합 용도: 7 애플리케이션s: Automotive Body Control Module, Industrial PLC I/O Expansion Module, Powertrain Sensor Interface ECU, Chassis Control ECU (ABS/ESC precursor platforms), Industrial Motor Drive Front-End Controller, Automotive Instrument Cluster Controller, HVAC Climate Control Module.
Automotive Body Control Module
The MC9S12A256MPVE's 25 MHz HCS12 core, 91 I/O pins, and integrated CAN 2.0, PWM, ADC, SCI, and SPI peripherals make it a strong fit for body control modules (BCMs) that drive lighting, door locks, mirrors, and wiper motors. With 256 KB Flash it accommodates BCM firmware including diagnostic lighting stacks (UDS/KWP2000), and the 12 KB RAM is sufficient for CAN message buffering and ECU state machines. The -40 C to +125 C operating range covers under-hood temperature swings. Pin count is critical here: the BCM must interface with multiple LIN/CAN transceivers, switch inputs, PWM-driven loads, and analog sensors simultaneously, and the 112-LQFP's 91 I/O lines provide that connectivity without external muxing.
추천
Industrial PLC I/O Expansion Module
For distributed PLC I/O nodes, the MC9S12A256MPVE delivers the deterministic interrupt latency and rich PWM/timer set that industrial expansion requires. Its 25 MHz HCS12 core, 91 I/O lines, and CAN 2.0 + SCI peripherals support fieldbus backhaul (CANopen / DeviceNet) and analog/digital I/O channels. The 256 KB Flash stores protocol stacks plus application logic, while 12 KB RAM handles cyclic scan buffers. The 112-LQFP provides the pin density needed to expose ADC inputs (typically 16+ analog channels), digital I/O banks, and dedicated peripheral pins without external I/O expanders, and the Part supports the wide -40 C to +125 C temperature range demanded by industrial cabinets.
추천
Powertrain Sensor Interface ECU
The MC9S12A256MPVE's ADC and PWM peripherals paired with 256 KB Flash suit engine and transmission sensor interface ECUs where analog sensor signal conditioning and actuator PWM drive are co-located. Its 25 MHz HCS12 core handles sensor linearization math and CAN message assembly, while 91 I/O pins accommodate multi-channel pressure/temperature/position sensor inputs and solenoid drive outputs. The Part's -40 C to +125 C operating range meets powertrain thermal requirements, and its deterministic 16-bit instruction cycle supports tight control-loop timing critical for emission and fuel-efficiency strategies. The 112-LQFP provides the pin breakout needed for mixed analog/digital sensor wiring at the ECU harness.
추천
Chassis Control ECU (ABS/ESC precursor platforms)
The MC9S12A256MPVE was widely deployed in chassis control platforms where deterministic interrupt handling, wheel-speed sensor inputs, and CAN networking converge. Its ECT (Enhanced Capture Timer) and PWM peripherals handle wheel-speed pulse timing and solenoid valve drive, while 256 KB Flash accommodates vehicle dynamics firmware. The 25 MHz HCS12 provides sufficient throughput for chassis control sample rates, and 12 KB RAM supports wheel-state snapshot buffers. The 112-LQFP exposes 91 I/O lines for sensor wiring harnesses; the Part's -40 C to +125 C rating supports chassis-mounted ECU environments where temperature swing is wide and vibration is present.
추천
Industrial Motor Drive Front-End Controller
For low-power industrial motor drives (pumps, fans, conveyors), the MC9S12A256MPVE provides PWM generation, ADC feedback sampling, and CAN/SCI host communication in one device. Its HCS12 core runs field-oriented control (FOC) loops for small BLDC and stepper motors at acceptable bandwidths, while 256 KB Flash stores application firmware plus fault-handling routines. The 91 I/O pins handle three-phase PWM, current-sense ADC inputs, encoder feedback, and host comms simultaneously, and the -40 C to +125 C temperature range supports motor cabinet thermal environments. The 112-LQFP simplifies PCB layout by providing single-chip integration that replaces external DSP+FPGA combinations for low-end drives.
추천
Automotive Instrument Cluster Controller
The MC9S12A256MPVE can drive instrument cluster functions including gauge stepper control, LCD segment driving, CAN message parsing, and switch input handling. Its 256 KB Flash stores gauge calibration and CAN database (dbcoded) message handlers, and its 12 KB RAM buffers incoming CAN frames for cluster animation timing. The 25 MHz core is fast enough for cluster animation routines, while 91 I/O pins accommodate multiple stepper motor outputs, switch matrix inputs, and telltale LED drivers. The Part's automotive -40 C to +125 C temperature rating supports dashboard-mounted cluster environments, and the 112-LQFP footprint provides ample pin count without requiring external I/O expanders.
추천
HVAC Climate Control Module
The MC9S12A256MPVE integrates HVAC control functions: temperature sensor ADC sampling, blower motor PWM control, mode-door actuator drive, and CAN/LIN body-network communication. Its 256 KB Flash accommodates HVAC firmware plus diagnostics; 12 KB RAM supports the small state machines needed for climate algorithms. The Part's 91 I/O pins handle NTC thermistor inputs, multiple blower speeds via PWM, mode-stepper drives, and rear-window defrost relay control. Its -40 C to +125 C automotive temperature rating covers cabin and under-hood HVAC module mounting, and the HCS12 core's deterministic interrupt handling ensures consistent blower response time to driver inputs and CAN commands.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S12A256MPVE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12A512CPVE | MC9S12A256CFUE | MC9S12E256CFUE | MC9S12E256VPVE | MC9S12DT128MPVE | S912XET512J2VAGR |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP (20x20) - same | 112-LQFP - same family | 112-LQFP - same family | 112-LQFP (20x20) - same | 112-LQFP - same family |
| Core | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | S12X (16-bit + XGATE) |
| Maximum Clock | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 50 MHz |
| Flash | 256 KB | 512 KB | 256 KB | 256 KB | 256 KB | 128 KB | 512 KB |
| RAM | 12 KB | 12 KB | 12 KB | 12 KB | 12 KB | 8 KB | 32 KB |
| I/O Pins | 91 | 91 | 91 | 91 | 91 | 91 | 91 |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| Lifecycle Status | NRND | Active | Active | Active | NRND | NRND | Active |
주요 차별점
- Largest memory in same-package 112-LQFP S12A family (vs MC9S12DT128MPVE)
- Direct die/package equivalent with active lifecycle (vs MC9S12A256CFUE)
- Drop-in 512KB Flash upgrade with active lifecycle (vs MC9S12A512CPVE)
- Same-package migration to enhanced S12X architecture (vs S912XET512J2VAGR)
설계 노트
NXP marks the MC9S12A256MPVE as NRND (Not Recommended for New Designs) per the official NXP product page. For new programs, plan migration to S912XET512 or S912XEQ384 families which share the 112-LQFP footprint and add an XGATE co-processor. Existing programs should request a last-time-buy quote from NXP or authorized distributors to secure inventory before discontinuation. Document the migration path in your PCN response file.
Place decoupling capacitors (100 nF ceramic) on every VDD/VSSX pin pair within 5 mm of the device body, and bulk decoupling 4.7 uF to 10 uF tantalum or ceramic at the regulator output. The 112-LQFP package has multiple VDD/VSSX power/ground pin pairs distributed around the package perimeter; missing any pair causes logic errors and ADC reference drift. Connect the analog VDDA/VSSA pair to a quiet ground and consider a ferrite bead separating digital and analog grounds.
Route the external bus (if enabled) with 50 ohm controlled-impedance traces and add 22-33 ohm series damping resistors at the MCU outputs when driving off-board signals. The 8/16-bit multiplexed external bus of the HCS12 is sensitive to trace length mismatch; keep address/data traces matched within 1 cm to avoid setup/hold violations at 25 MHz. Keep the EXTAL/XTAL crystal traces short and guard them with a ground pour to minimize jitter.
Do not leave the TEST pin floating; tie it to VDDX through a 4.7 kohm pull-up resistor per NXP reference design, otherwise the device may enter test mode. The BKGD (Background Debug Mode) pin must be accessible for ISP programming and BDM debuggers; do not put it on a net that is hidden under the package. Ensure the RESET pin has a 10 kohm pull-up and 100 nF decoupling cap to provide a clean power-on reset.
Estimated: at 25 MHz full-clock operation, typical HCS12 core power dissipation is roughly 150-200 mW at 5V VDD; at 125 C ambient the 112-LQFP package (theta_JA approx 45 C/W for a 4-layer JEDEC test board) limits reliable operation. For under-hood deployment above 105 C ambient, derate clock speed or attach a copper pour heatsink on the package top. Verify with the actual NXP S12A thermal application note for your PCB stackup.
규정 준수 정보
Compliance fields marked unknown because the NXP product page and verified distributor snippets did not explicitly state RoHS/REACH/AEC-Q100 status. For automotive programs, request the full material declaration from NXP via the official product page before qualification.
