MCF5213LCVM80 - ColdFire V2 MCU 80MHz 256KB Flash | NXP 81-MAPBGA
부품 번호: MCF5213LCVM80 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.75 | $9,750.00 |
MCF5213LCVM80 개요
What is a ColdFire microcontroller? ColdFire is a 32-bit RISC architecture derived from the original Motorola 68000 family, optimized for embedded systems that need 32-bit data paths, deterministic interrupt response, and rich on-chip peripherals without the cost of a high-MIPS application processor. It sits in the taxonomy as: microcontroller -> 32-bit MCU -> RISC MCU -> ColdFire V2 MCU. The V2 core adds an enhanced multiply-accumulate (EMAC) unit and a hardware divider while keeping the instruction-set compact, which is why MCF5213 parts are still seen in industrial drives, factory automation, and POS terminal designs.
Key features that matter on the bench include 256 KB of single-supply flash with security and programmable partitioning, 32 KB of static RAM for stack and data, an integrated CAN 2.0B controller for industrial networking, and three independent UARTs that simplify RS-232/RS-485 bridges or debug-channel multiplexing. The 81-MAPBGA package is a low-profile surface-mount BGA designed to keep trace escape manageable on 4-layer boards while exposing enough I/O for parallel expansion buses and external memory interfaces.
From an architectural standpoint, the MCF5213 uses a Von Neumann-style unified bus between the ColdFire V2 core, flash, SRAM, and peripheral bridges, with a peripheral DMA controller capable of moving data between the UART, CAN, and ADC blocks without CPU intervention. This keeps the CPU free for deterministic control loops at 80 MHz, while the EMAC engine accelerates DSP-style filtering or FFT kernels commonly used in motor-control and instrumentation code.
Typical applications for the MCF5213LCVM80 include industrial CAN nodes, factory automation controllers, building-automation gateways, and human-machine interface (HMI) panels. It is also a fit for legacy point-of-sale terminals, low-end motion-control daughter boards, and any design that needs deterministic UART/CAN communication backed by a familiar ColdFire toolchain.
When designing with this part, plan the BGA escape pattern carefully because 81-MAPBGA at 0.8 mm or 1.0 mm pitch (per the package code 'L' suffix) leaves limited routing channels. Also confirm the lifecycle status with your distributor before committing to a long-life industrial program. This page consolidates current distributor pricing, drop-in upgrade paths within the MCF521x family, and practical design notes not bundled into the manufacturer datasheet.
드롭인 대체품: MCF5213LCVM80 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCF5213LCVM80 (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Operating Temperature, Package, Mounting Type, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCF5213LCVM80J
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCF5212LCVM80
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$11.5 / 개
데이터시트 보기 →MCF5213CAF80
✅ 드롭인✓ 재고 있음
$10.6 / 개
데이터시트 보기 →MCF5214LCVM80
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCF5211LCVM80
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCF5213LCVM80 최대 정격 & 전기적 특성
| Core | ColdFire V2 (MCF521x family) |
| 데이터 버스 폭 | 32-bit |
| 최대 클록 주파수 | 80 MHz |
| Program Memory Size | 256 KB (256K x 8) flash |
| Program Memory Type | FLASH |
| RAM Size | 32 KB (32K x 8) |
| Number of I/O | 56 |
| 동작 온도 | -40C to +85C (industrial) |
| 패키지 / 케이스 | 81-MAPBGA (10 x 10 mm) |
| 실장 유형 | Surface Mount (BGA) |
| Packaging | Tray |
| Oscillator Type | Internal |
| Connectivity | 3 x UART, 1 x CAN 2.0B, I2C, QSPI |
| Peripherals | DMA, PWM, ADC, timers, watchdog |
| RoHS 상태 | Compliant |
| Lifecycle | NRND (Not Recommended for New Designs) |
MCF5213LCVM80 81-mapbga (10 x 10 mm) 핀 구성 가이드
MCF5213LCVM80(81-mapbga (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCF5213LCVM80.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCF5213LCVM80 적합 용도: 6 애플리케이션s: Industrial CAN Node Controllers, Factory Automation Gateways, Building Automation Controllers, Point-of-Sale (POS) Terminals, Low-End Motion Control Daughter Boards, Human-Machine Interface (HMI) Panels.
Industrial CAN Node Controllers
The MCF5213LCVM80's integrated CAN 2.0B controller and three UARTs make it a strong fit for distributed industrial CAN nodes that must communicate with PLCs, motor drives, and remote sensors over a 1 Mbit/s CAN bus. Its 32-bit ColdFire V2 core at 80 MHz plus hardware DMA offloads CAN mailbox servicing, leaving CPU cycles for deterministic control loops with sub-millisecond response. Designers typically place it as the gateway MCU between field-bus CAN and an RS-485 trunk, using one UART for the upstream link, one UART for a local HMI display, and a third for firmware debug or GPS time-sync. Compared with ARM Cortex-M0 alternatives, the MCF5213's larger SRAM headroom simplifies buffering CANopen or DeviceNet stacks in industrial environments.
추천
Factory Automation Gateways
Factory automation gateways require a deterministic 32-bit MCU with multiple serial channels and BGA packaging that survives industrial temperature ranges. The MCF5213LCVM80 hits these marks with its three UARTs, integrated CAN 2.0B, 56 GPIOs, and -40C to +85C industrial rating. The 81-MAPBGA (10x10 mm) package keeps the gateway board compact while exposing enough I/O for parallel expander buses, status LEDs, and keypad scanning. Its 256 KB flash stores full Modbus RTU, Modbus TCP, and CANopen protocol stacks alongside the main application, while 32 KB SRAM buffers incoming telegrams. The ColdFire V2 EMAC engine also accelerates CRC checksums that gate every incoming packet.
추천
Building Automation Controllers
Building automation controllers for HVAC, lighting, and access systems benefit from the MCF5213LCVM80's combination of UART channels for Modbus RTU, CAN for BACnet or proprietary trunks, and enough flash to host a small RTOS. The 256 KB program memory easily accommodates BACnet stack plus application logic, while the integrated PWM blocks drive analog outputs for damper and valve control. The 81-MAPBGA package is mechanically robust and supports automated reflow assembly, which lowers manufacturing cost for high-volume building controllers deployed across commercial real estate.
추천
Point-of-Sale (POS) Terminals
POS terminals rely on the MCF5213LCVM80's three UARTs to simultaneously drive a magnetic-stripe reader, a receipt printer, and a barcode scanner while a CAN bus connects to a back-room controller. The ColdFire V2 core's deterministic interrupt latency keeps card transactions responsive, and the 32 KB SRAM buffers transaction records before they are written to external EEPROM. The 81-MAPBGA package's low profile fits inside slim countertop terminals, and the part's industrial temperature rating allows deployment in semi-outdoor kiosks without extra thermal management. Compared with newer ARM Cortex-M parts, the MCF5213 offers proven firmware libraries still in production use.
추천
Low-End Motion Control Daughter Boards
Stepper and BLDC motor control daughter boards benefit from the MCF5213LCVM80's PWM timers, quadrature encoder inputs, and CAN connectivity for daisy-chained multi-axis systems. The 80 MHz ColdFire V2 EMAC engine executes field-oriented control (FOC) math at update rates beyond 10 kHz, while the DMA channels offload encoder sampling without CPU overhead. The 81-MAPBGA package exposes enough pins for three-phase PWM outputs, hall-sensor inputs, and the CAN bus, all in a footprint that fits standard 35-mm frame BLDC drives. Designers often pair it with external gate drivers and current-sense amplifiers for a complete axis module.
추천
Human-Machine Interface (HMI) Panels
HMI panels for industrial machinery require a microcontroller that can drive a color TFT display, scan a keypad matrix, and stream status over UART or CAN simultaneously. The MCF5213LCVM80's three UARTs split cleanly between the touchscreen controller, the PLC link, and the debug console, while the 56 GPIOs drive keypad scanning and indicator LEDs without external I/O expanders. The 256 KB flash stores graphics primitives and Chinese/English font tables needed for HMI use cases, and the 32 KB SRAM holds display frame buffers during partial refreshes. The BGA package supports the compact PCB geometry typical of 4.3-inch HMI panels.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCF5213LCVM80 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCF5213LCVM80J | MCF5212LCVM80 | MCF5213CAF80 | MCF5214LCVM80 | MCF5211LCVM80 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 81-MAPBGA (10x10) | 81-MAPBGA (10x10) - same | 81-MAPBGA (10x10) - same | 81-MAPBGA (10x10) - same | 81-MAPBGA (10x10) - same | 81-MAPBGA (10x10) - same |
| Core | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 |
| Clock Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Size | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB | 128 KB |
| RAM Size | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| UART Count | 3 | 3 | 2 | 3 | 3 | 2 |
| CAN Controller | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Lifecycle Status | NRND | NRND | NRND | Active (recommended successor) | NRND | NRND |
주요 차별점
- Three UARTs plus integrated CAN 2.0B (vs MCF5212LCVM80)
- Updated silicon revision available as drop-in (vs MCF5213LCVM80J)
- 256 KB flash with field-reprogramming support (vs MCF5211LCVM80)
설계 노트
The 81-MAPBGA (10x10 mm) package has 0.8 mm or 1.0 mm ball pitch (per the 'L' suffix code). Escape routing requires via-in-pad or micro-via technology on at least 2 inner layers, with a 4-layer stack-up strongly recommended. Place four-quadrant ground vias around the BGA thermal/ground balls to lower ground bounce and provide a low-impedance return path for the high-speed ColdFire bus.
The MCF5213LCVM80 needs a clean 3.3 V core rail plus a separate PLL supply pin; both should be decoupled with 100 nF ceramic capacitors placed within 3 mm of each pin, plus a bulk 10 uF tantalum or polymer capacitor. The internal voltage regulator for the ColdFire V2 core demands a stable input - design the upstream DC-DC converter with less than 50 mV peak-to-peak ripple to avoid PLL unlock and instruction-fetch errors.
Do not assume the 'C' and 'L' suffixes are interchangeable. The 'L' suffix denotes the 81-MAPBGA (10x10) industrial temperature variant, while 'C' typically denotes a different temperature grade or silicon revision per the official NXP ordering information. Verify the exact suffix against your schematic before placing volume orders, especially when the part is NRND.
Route the external bus and CAN signals on inner layers between two ground planes to minimize EMI, and keep trace lengths matched within 5 mm for parallel bus signals. Add a 120-ohm termination resistor between CANH and CANL placed close to the MCU's CAN pins when bus lengths exceed 1 meter, and verify dominant/recessive bit timing with an oscilloscope probe.
규정 준수 정보
RoHS and REACH compliance confirmed via NXP product page. AEC-Q100 not applicable - this is an industrial-grade MCU. Halogen-free status not explicitly stated in the verified data.