MCF5281CVM80 - 80MHz ColdFire V2 MCU 256KB Flash | NXP
부품 번호: MCF5281CVM80 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $63.6 | $63.60 |
| 10 | $56.4 | $564.00 |
| 100 | $48.2 | $4,820.00 |
| 500 | $41.1 | $20,550.00 |
| 1,000 | $36.8 | $36,800.00 |
MCF5281CVM80 개요
A ColdFire V2 microcontroller is a 32-bit RISC-style processor derived from the original Motorola 68000 instruction set architecture. ColdFire V2 implementations keep the variable-length instruction encoding of the classic M68K while adding a more compact pipeline, on-chip MAC units in higher SKUs, and integrated peripherals. Within NXP's lineup, ColdFire V2 sits between the entry-level ColdFire V1 (smaller flash, simpler peripherals) and the more powerful ColdFire V3/V4 cores (MMU, higher MHz). It is best characterized as a mid-range 32-bit MCU for deterministic real-time control with integrated connectivity.
Key differentiating features of the MCF5281CVM80 include the integrated 10/100 Ethernet MAC with DMA, a CAN 2.0B controller, four DMA channels for offloading data movement, and hardware acceleration for cryptographic-style operations in the same family. The 256-MAPBGA package exposes the full external bus (EBI/EMI), which lets designers connect SDRAM, NOR flash, or ASIC peripherals. Programmable peripherals (PWM timers, watchdog, low-voltage detect, and power-on reset) cover the industrial control safety baseline.
Architecturally, the MCF5281CVM80 uses a unified instruction/data path with Harvard-style bus splits between flash and SRAM, allowing single-cycle access to RAM. The ColdFire V2 core executes most instructions in one clock, delivering 80 Dhrystone MIPS at 80 MHz core clock. The on-chip voltage regulator generates 1.3-1.5 V internal logic from an external 3.3 V supply, simplifying board power design. The 256-MAPBGA package provides ample ground returns for the 80 MHz core.
Typical applications include industrial Ethernet PLCs, building automation gateways, factory-floor protocol bridges, and motor-control front-ends. Industrial Ethernet protocols such as EtherNet/IP, Modbus TCP, and PROFINET can run on the integrated MAC and DMA infrastructure. The CAN interface also enables the part to serve as a CAN-to-Ethernet bridge, a popular topology in automotive test equipment and factory automation.
When designing with the MCF5281CVM80, place four-layer decoupling capacitors (100 nF + 10 µF bulk) directly under the BGA on the inner power plane to control switching noise. The 256-ball MAPBGA requires X-ray or AOI inspection on the production line, since hidden solder joints cannot be optically inspected. Designers must also consider that this part is marked NXP NRND (Not Recommended for New Designs); for new designs, evaluate the MCF5282 or Kinetis family as pin-compatible successors.
This page consolidates distributor pricing, drop-in alternative guidance, and practical layout notes that go beyond the manufacturer datasheet. By comparing verified inventory across DigiKey, Mouser, and Octopart, this page supports engineers planning NRND transitions and procurement teams managing last-time-buy windows.
드롭인 대체품: MCF5281CVM80 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCF5281CVM80 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Core Architecture, Ethernet, Ethernet MAC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCF5282CVM80
✅ 드롭인✓ 재고 있음
$17.85 / 개
데이터시트 보기 →MCF5280CVM80
✅ 드롭인✓ 재고 있음
$19.75 / 개
데이터시트 보기 →MCF5281CVM66
✅ 드롭인✓ 재고 있음
$32.77 / 개
데이터시트 보기 →MCF5281CVM80
✅ 드롭인✓ 재고 있음
$36.8 / 개
데이터시트 보기 →MCF5214CVM66
✅ 드롭인✓ 재고 있음
$11.85 / 개
데이터시트 보기 →MCF5281CVM80 최대 정격 & 전기적 특성
| Core Processor | ColdFire V2 |
| Core Size | 32-Bit |
| Maximum Clock Speed | 80 MHz |
| Program Memory Size | 256 KB (256K x 8) Flash |
| RAM Size | 64 KB (64K x 8) |
| Number of I/O | 142 |
| 공급 전압 | 3.3 V |
| 패키지 / 케이스 | 256-MAPBGA (17x17 mm) |
| 실장 유형 | Surface Mount |
| Connectivity | CANbus, EBI/EMI, Ethernet, I²C, SPI, UART/USART |
| Peripherals | DMA, LVD, POR, PWM, WDT |
| Oscillator Type | External |
| 동작 온도 | -40C to +85C (industrial) |
| Temperature Grade | Industrial |
| Terminal Form | BALL |
| Number of Terminals | 256 |
| Package Code | LBGA |
| Package Shape | SQUARE |
| MSL 레벨 | 3 |
| Part Status | Not For New Designs (NRND) |
MCF5281CVM80 square 핀 구성 가이드
MCF5281CVM80(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCF5281CVM80.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCF5281CVM80 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway / PLC, CAN-to-Ethernet Protocol Bridge, Building Automation Controller, Motor Control Front-End, Automotive Test and Diagnostics Equipment, Embedded Server Appliance.
Industrial Ethernet Gateway / PLC
The MCF5281CVM80's integrated 10/100 Ethernet MAC with DMA offload, combined with 256 KB flash and 64 KB SRAM, is well-suited to industrial Ethernet gateways that translate fieldbus protocols into TCP/IP. The 80 MHz ColdFire V2 core delivers enough compute to run a Modbus TCP or EtherNet/IP server stack while leaving cycles for deterministic control loops. The four DMA channels keep TCP/IP and CAN traffic from starving the CPU.
추천
CAN-to-Ethernet Protocol Bridge
With both a CAN 2.0B controller and an Ethernet MAC on-chip, the MCF5281CVM80 acts as a transparent CAN-to-Ethernet bridge used in factory automation and automotive test equipment. The part can filter CAN frames in hardware and forward them via TCP or UDP without CPU intervention, reducing latency below 1 ms on a lightly loaded bus. The 142 user I/O pins are sufficient for status LEDs, isolated digital inputs, and CAN bus diagnostics.
추천
Building Automation Controller
Building automation controllers using the MCF5281CVM80 benefit from its PWM timers, watchdog, and external bus interface for connecting to legacy parallel peripherals. The 64 KB SRAM holds BACnet/IP and KNX/IP messaging buffers; 256 KB flash is enough for the application plus the protocol stack. The industrial -40C to +85C operating range covers unheated equipment closets and rooftop enclosures.
추천
Motor Control Front-End
The MCF5281CVM80's PWM timers and DMA make it usable as a motor-control front-end for low-to-mid power brushless DC and AC induction drives up to a few hundred watts. The 80 MHz core can execute field-oriented control (FOC) loops in under 10 µs when carefully coded. The CAN interface communicates with a higher-level PLC or industrial PC; the Ethernet MAC streams telemetry for remote monitoring.
추천
Automotive Test and Diagnostics Equipment
Off-vehicle automotive test rigs frequently use the MCF5281CVM80 because of its integrated CAN, Ethernet, UART, SPI, and I²C in a single chip. The industrial temperature grade and on-chip watchdog support 24/7 diagnostic operation. Combined with the external bus interface, the MCU can also drive TFT-LCD panels and SD card storage for in-vehicle log capture.
추천
Embedded Server Appliance
Compact embedded server appliances for protocol translation, edge data buffering, or remote terminal access can be built around the MCF5281CVM80. The Ethernet MAC plus the EBI/EMI bus allow connection of external SDRAM for packet buffers, while the 64 KB internal SRAM handles fast-path operations. The part also supports DMA offload so the ColdFire V2 core can serve a small embedded web interface without saturating the CPU.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCF5281CVM80 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCF5282CVM80 | MCF5280CVM80 | MCF5281CVM66 | MCF5214CVM66 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 256-MAPBGA (17x17 mm) | 256-MAPBGA (17x17 mm) - same | 256-MAPBGA (17x17 mm) - same | 256-MAPBGA (17x17 mm) - same | 256-MAPBGA - same |
| Core | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V1 |
| Maximum Clock | 80 MHz | 80 MHz | 80 MHz | 66 MHz | 66 MHz |
| Flash Size | 256 KB | 512 KB | 0 KB (external boot only) | 256 KB | 256 KB |
| SRAM Size | 64 KB | 64 KB | 64 KB | 64 KB | 32 KB |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | No |
| CAN Controller | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) | Yes (CAN 2.0B) |
주요 차별점
- Integrated Ethernet MAC plus CAN 2.0B on ColdFire V2 at 80 MHz (vs MCF5214CVM66)
- Drop-in 256-MAPBGA pinout across the MCF528x family (vs MCF5280CVM80)
- Higher core clock for protocol-stack headroom (vs MCF5281CVM66)
설계 노트
The 256-MAPBGA package has a junction-to-ambient thermal resistance around 30 C/W with a standard JEDEC test board. At 80 MHz, typical core power dissipation is roughly 0.8 W, producing about a 24 C rise above ambient. For sealed enclosures without airflow, place thermal vias under the central ground balls to spread heat into the inner power plane. Forced-air cooling is rarely required at 80 MHz but is recommended above 85 C ambient.
Use a 4-layer PCB stack-up with continuous power and ground planes under the BGA. Place 100 nF X7R decoupling on every VDD/VSS ball pair, plus 10 µF bulk tantalum or ceramic near the external regulator input. Via-in-pad with filled and plated-over copper is strongly recommended for the center balls to avoid solder joint voids. Keep the external 25 MHz crystal traces short and guarded with a ground ring to meet Ethernet MAC timing.
Avoid leaving unused balls floating on the MAPBGA - tie them to ground through a zero-ohm resistor or a no-stencil pad. Do not mix the 3.3 V I/O supply with the 1.5 V internal core supply on the same regulator - separate LDOs are mandatory. The watchdog timer is enabled by default at reset; firmware must disable it within the first 1 ms or unexpected resets will occur in development boards. Always validate boot mode straps before connecting the JTAG emulator.
규정 준수 정보
Lead-free confirmed per the NXP product page; RoHS and REACH status were not explicitly stated in the provided web data and are marked unknown. The part is industrial-grade (not AEC-Q100).
