MCIMX6Q6AVT10AC - i.MX6 Quad 1GHz ARM Cortex-A9 MPU | NXP
부품 번호: MCIMX6Q6AVT10AC ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.75 | $347.50 |
| 100 | $30.2 | $3,020.00 |
| 500 | $26.85 | $13,425.00 |
| 1,000 | $24.1 | $24,100.00 |
MCIMX6Q6AVT10AC 개요
An applications processor (AP) is a system-on-chip (SoC) class microprocessor that integrates CPU cores, GPU, memory controller, multimedia accelerators, and a rich set of peripheral interfaces onto a single die. The i.MX 6 family sits at the high end of NXP's multimedia applications processor lineup and is widely used in automotive infotainment, industrial HMI, and medical imaging. The Quad variant delivers four Cortex-A9 cores that can run an SMP operating system such as Linux or Android, with each core capable of out-of-order execution and NEON SIMD extensions.
Key features of the MCIMX6Q6AVT10AC include four ARM Cortex-A9 cores at up to 1.0 GHz, dual-port graphics with separate 3D (GC2000, ~25 MTriangles/s, ~200 Mpix/s) and 2D/vector GPUs, hardware-accelerated 1080p60 H.264 BP/MP/HP encode/decode plus VP8 decode, support for DDR3 and LPDDR2 memory up to 64-bit, multiple display interfaces (HDMI 1.4, LVDS, MIPI-DSI, parallel RGB), and a wide peripheral mix including USB 2.0 with PHY, PCIe 2.0, SATA II, Gigabit Ethernet, CAN, UART, SPI, I2C, and I2S. It is automotive-qualified for the -40C to +125C Tj range and integrates an advanced security and boot authentication block.
Architecture-wise, the device pairs an ARM Cortex-A9 MPCore complex with a Cortex-M4 for low-power real-time tasks on some variants, but on the 6Quad it is the four A9 cores that drive performance. The integrated Smart Speed Technology uses dynamic voltage and frequency scaling (DVFS) to reduce power consumption when full throughput is not required. The multilevel memory system combines L1 instruction/data caches, a unified L2 cache, and on-chip SRAM/ROM for fast boot.
Typical applications include automotive infotainment head units, advanced driver assistance (ADAS) display controllers, industrial HMI panels, medical imaging and patient monitoring displays, smart-home gateways, and single-board computers for multimedia. In automotive head units the chip drives the central touchscreen plus a rear-seat display, runs QNX or Automotive Grade Linux, and decodes 1080p video for navigation and camera views.
When designing with the MCIMX6Q6AVT10AC, ensure the PCB uses the 0.8 mm pitch 624-ball FCBGA land pattern and a 6+ layer stack-up with continuous GND planes to handle the multi-gigabit DDR3 interfaces; engineers should also provision a 3.3 V main rail and a 1.1 V core VCORE rail generated by an external PMU such as the PF3000/PCA9450. The variant's trailing "AC" suffix denotes the specific silicon revision and operating temperature grade, so confirm against the NXP i.MX 6 reference manual when migrating from MCIMX6Q6AVT10AD or MCIMX6Q6AVT10AE.
This page synthesizes NXP distributor pricing, FCBGA-624 drop-in alternatives within the i.MX6 Quad family, and practical design notes that complement the manufacturer datasheet.
드롭인 대체품: MCIMX6Q6AVT10AC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCIMX6Q6AVT10AC (동일 폼 팩터 및 풋프린트) — 차이점: Memory Interface, Series, Mounting Type, Core Architecture, Display Interfaces.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCIMX6Q6AVT10AD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Q6AVT10AE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6D6AVT10AC
✅ 드롭인✓ 재고 있음
$47.8 / 개
데이터시트 보기 →MCIMX6D4AVT08AD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Q5AVT10AD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Q6AVT10AC 최대 정격 & 전기적 특성
| Series | i.MX 6Quad |
| Core Architecture | ARM Cortex-A9 MPCore (4 cores) |
| Core Count | 4 |
| 데이터 버스 폭 | 32-bit |
| Maximum CPU Frequency | 1.0 GHz |
| Graphics Processor | Vivante GC2000 (3D) + GC355 (3D) + GC320 (2D) |
| Video Processing | 1080p60 H.264 BP/MP/HP encode/decode, VP8 decode |
| Memory Interface | DDR3 / LPDDR2, 32-bit and 64-bit, up to 2 GB |
| Display Interfaces | HDMI 1.4, LVDS (2x), MIPI-DSI (2 lanes), parallel RGB |
| Peripheral Interfaces | USB 2.0 with PHY, PCIe 2.0, SATA II, Gigabit Ethernet (2x), CAN (2x), UART, SPI, I2C, I2S, ESAI |
| Security | High Assurance Boot (HAB), cryptographic accelerators, RNG |
| 동작 온도 범위 | -40C to +125C (Tj, automotive grade) |
| Package Type | FCBGA-624 (21 mm x 21 mm, 0.8 mm pitch) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (per JEDEC J-STD-020) |
| RoHS 상태 | Compliant |
| Product Status | NRND (Not Recommended for New Designs) |
MCIMX6Q6AVT10AC fcbga-624 (21 mm x 21 mm, 0.8 mm pitch) 핀 구성 가이드
MCIMX6Q6AVT10AC(fcbga-624 (21 mm x 21 mm, 0.8 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCIMX6Q6AVT10AC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCIMX6Q6AVT10AC 적합 용도: 6 애플리케이션s: Automotive Infotainment Head Unit, Industrial HMI Touch Panel, Medical Imaging Display Controller, Smart Home Gateway / Hub, Single-Board Computer (SBC) / Multimedia Appliance, ADAS Surround-View Display Module.
Automotive Infotainment Head Unit
The MCIMX6Q6AVT10AC is a strong fit for central automotive infotainment head units because its four 1.0 GHz Cortex-A9 cores deliver the throughput needed to run Automotive Grade Linux or QNX while simultaneously decoding 1080p60 H.264 video for navigation, rear-camera, and media playback. The integrated Vivante GC2000/GC355/GC320 GPU handles the OpenGL ES compositor for the touchscreen plus dual rear-seat displays through the parallel RGB, LVDS, and HDMI 1.4 outputs. AEC-Q100 qualification at -40C to +125C Tj means the part survives the under-dash thermal environment without derating, while the integrated High Assurance Boot block and cryptographic accelerators secure the CAN and Ethernet gateway against unauthorized firmware. Reference companion parts include the NXP PF3000/PCA9450 PMIC for rail sequencing, TJA1044T CAN transceivers, and the TDA19988 HDMI transmitter.
추천
Industrial HMI Touch Panel
The MCIMX6Q6AVT10AC fits industrial HMI panels because the Vivante GC2000 GPU renders rich Qt/WebGL HMIs at 1080p60 with the four Cortex-A9 cores reserved for control logic and protocol stacks. Its dual CAN, dual Gigabit Ethernet, USB 2.0, and PCIe 2.0 lanes let a single chip host the touch controller, multiple fieldbus gateways (EtherCAT, PROFINET, Modbus TCP), and a Gigabit uplink without an external MPU. The -40C to +125C junction range covers sealed panel installations in factory cabinets, and the integrated HAB boot block ensures only signed firmware runs on the machine, satisfying IEC 62443 expectations. The chip's hardware 1080p codec is also useful for inline vision display alongside the HMI. Pair it with the PCA9450A PMIC and a DDR3L memory array for a production-ready design.
추천
Medical Imaging Display Controller
The MCIMX6Q6AVT10AC is suitable for medical imaging display controllers that drive diagnostic-grade LCDs because its HDMI 1.4 and dual LVDS outputs feed the panel backplane at full 1080p with hardware-accelerated H.264 decode for live ultrasound or endoscopy streams. The four Cortex-A9 cores run the embedded medical UI, image-processing pipelines, and DICOM network stack concurrently, while the integrated security block supports HIPAA-relevant boot authentication and encrypted storage. AEC-Q100-style temperature margins help with the long uptime expected in clinical carts. Reference companion parts include the PF3000 PMIC, a TI ISO7760 isolator for patient-side serial links, and an external eMMC for non-volatile image storage.
추천
Smart Home Gateway / Hub
The MCIMX6Q6AVT10AC suits premium smart-home gateways because the four Cortex-A9 cores concurrently run a Linux userspace with Matter/Thread/Zigbee stacks, voice-agent wake-word handling, and local UI rendering on a wall-mounted touchscreen. The integrated dual Gigabit Ethernet MAC plus PCIe 2.0 lane hosts a Wi-Fi 6 NIC, the USB 2.0 with PHY attaches a Thread/Zigbee radio dongle, and the I2S/ESAI ports feed a Class-D audio amplifier for voice prompts. The hardware 1080p decoder is used for door-camera pop-ups on the gateway display, and the HAB boot block enforces signed firmware updates. Pair it with the PCA9450A PMIC, a BCM43752 Wi-Fi 6 companion, and DDR3L memory.
추천
Single-Board Computer (SBC) / Multimedia Appliance
The MCIMX6Q6AVT10AC fits multimedia single-board computers because its i.MX 6Quad SoC integrates CPU, GPU, VPU, and display pipeline in a single 624-ball FCBGA, eliminating the multi-chip cost of competing designs. Designers get 1080p60 H.264 encode/decode for streaming media plus a Vivante GC2000 GPU for hardware-accelerated Qt/WebGL UIs, while the four Cortex-A9 cores run a full Linux distribution. The 21x21 mm FCBGA and 0.8 mm pitch keep the baseboard to a 6-layer stack-up with microvias, which is achievable on standard FR-4 processes. Pair it with a PCA9450A PMIC, DDR3L memory, and an external HDMI retimer.
추천
ADAS Surround-View Display Module
The MCIMX6Q6AVT10AC fits ADAS surround-view display modules because the four Cortex-A9 cores overlay and composite four camera streams in real time, while the Vivante GPU renders the bird's-eye and 3D perspective views onto the cluster LCD via LVDS. Hardware 1080p H.264 decode offloads the recorded surround-view playback, and the two CAN interfaces hook directly into the vehicle bus for steering-angle and gear-state data. The chip's AEC-Q100 qualification to +125C Tj handles behind-the-dash thermals. Pair it with the PCA9450A PMIC, MAX9286 quad GMSK deserializer, and a TFGA-grade LPDDR2 memory array.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCIMX6Q6AVT10AC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCIMX6Q6AVT10AD | MCIMX6Q6AVT10AE | MCIMX6D6AVT10AC | MCIMX6D4AVT08AD | MCIMX6Q5AVT10AD |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | FCBGA-624 (21x21, 0.8 mm pitch) | FCBGA-624 (21x21) - same | FCBGA-624 (21x21) - same | FCBGA-624 (21x21) - same | FCBGA-624 (21x21) - same | FCBGA-624 (21x21) - same |
| Core Architecture | ARM Cortex-A9 quad-core | ARM Cortex-A9 quad-core | ARM Cortex-A9 quad-core | ARM Cortex-A9 dual-core | ARM Cortex-A9 dual-core | ARM Cortex-A9 quad-core |
| Maximum CPU Frequency | 1.0 GHz | 1.0 GHz | 1.0 GHz | 1.0 GHz | 850 MHz | 1.0 GHz |
| Automotive Qualified | Yes (AEC-Q100, -40C to +125C Tj) | Yes | Yes | Yes | Yes | No (consumer grade) |
| Silicon Revision | C (rev AC) | D (rev AD) | E (rev AE) | C (rev AC) | D (rev AD) | D (rev AD) |
| Memory Interface | DDR3 / LPDDR2, 64-bit | DDR3 / LPDDR2, 64-bit | DDR3 / LPDDR2, 64-bit | DDR3 / LPDDR2, 64-bit | DDR3 / LPDDR2, 64-bit | DDR3 / LPDDR2, 64-bit |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Quad-core Cortex-A9 at 1.0 GHz vs Dual-core 6Dual variants (vs MCIMX6D6AVT10AC)
- Latest silicon revision AE with updated errata fixes (vs MCIMX6Q6AVT10AD)
- Automotive-grade silicon qualified to +125C Tj (vs MCIMX6Q5AVT10AD)
설계 노트
The FCBGA-624 package relies on the PCB top-layer copper pour for heat dissipation. For automotive +125C Tj operation under continuous 1.0 GHz load, allocate a minimum 4x4 array of thermal vias under the die shadow, stitch the top GND pour across the package perimeter, and follow the NXP i.MX 6Quad Thermal Management AN. Use a thermal interface material (TIM) if a heatsink is mounted. Typical VCORE current at 1.0 GHz is around 1.2 A, so size the 1.1 V copper plane accordingly.
Use a 6+ layer PCB stack-up with dedicated GND and PWR planes adjacent to the top signal layer. Match the DDR3/LPDDR2 lengths per the i.MX 6Quad Hardware Design Guide (target within 25 ps skew on the byte lanes). Use 100 ohm differential impedance for USB, PCIe, SATA, and LVDS, and 90 ohm for HDMI. Escape the FCBGA-624's 0.8 mm pitch on an 0.4/0.6 mil trace/space HDI process with laser microvias.
Power the MCIMX6Q6AVT10AC through an NXP PCA9450A or PF3000 PMIC for proper rail sequencing (1.1 V VCORE, 1.5 V LVDDR, 1.8 V, 3.3 V). Decouple each VCORE ball with a 1 uF 0402 X7R ceramic placed within 1 mm of the ball, plus a 10 uF bulk on each rail. Avoid sharing the VCORE inductor between i.MX6 and the PMIC core - isolate the analog and digital grounds as recommended in the reference schematic.
Keep all high-speed differential pairs (USB, PCIe, SATA, HDMI, LVDS) length-matched within 150 mil of their respective clocks. Series-ac-cap the DSI/CSI lanes and route them on inner layers with continuous GND reference. Place boot mode resistors on the BOOT_CFG pins with 4.7K pull-ups to the proper rail so the boot source can be reconfigured in production.
Do not populate a non-automotive revision (suffix 5) into AEC-Q100 designs - the temperature grade and errata list differ. When migrating between mask sets AC, AD, and AE, re-validate HAB keys, USB PHY impedance, and DDR3 training values per the latest errata. The PCIMX6Q6AVT10AC preproduction MPN must never be used in volume production silicon.
규정 준수 정보
AEC-Q100 qualified per NXP i.MX 6Quad datasheet. RoHS and REACH compliant. Lead-free and halogen-free per NXP material declaration. Conflict-mineral compliant per NXP supplier program.
