MPC8536EAVTANG - PowerQUICC III 800 MHz e500 MPU | NXP
부품 번호: MPC8536EAVTANG ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $137.71 | $137.71 |
| 10 | $128.5 | $1,285.00 |
| 100 | $115.2 | $11,520.00 |
| 500 | $98.75 | $49,375.00 |
| 1,000 | $85.4 | $85,400.00 |
MPC8536EAVTANG 개요
What is a PowerQUICC III microprocessor? The PowerQUICC III family represents NXP's third-generation communications processor architecture, sitting within the broader category of embedded microprocessors (MPU). It evolved from the PowerQUICC II line by replacing the QUICC engine with dedicated hardware acceleration blocks (security, pattern matching, QoS), making the part a member of the broader embedded processor / MPU taxonomy (embedded processor -> microprocessor -> SoC). These devices serve as the central processing element in routers, switches, base stations, and industrial control systems.
Key features of the MPC8536EAVTANG include up to 800 MHz e500 core frequency, dual integrated 10/100/1000 Mbps Ethernet MACs with TCP/IP acceleration, DDR2 SDRAM controller with ECC, hardware security engine supporting IPSec, Kasumi, and SNOW 3G ciphers, PCI Express interface (x4), and 32-bit local bus. The 783-FCBGA package exposes a wide I/O set including 16 local bus data lines, multiple SERDES lanes, and general-purpose I/O.
Technically, the MPC8536EAVTANG couples a high-performance superscalar e500 core with on-chip peripherals that offload packet processing and security from the CPU. The dual eTSEC ports support jumbo frames, VLAN tagging, and QoS, while the integrated security engine handles bulk crypto at line rate without taxing the core.
Typical applications include enterprise routing and switching, wireless base station controllers, security appliances (VPN/firewall/UTM), industrial automation controllers, and networked storage platforms. The part's combination of compute, memory bandwidth, and integrated peripherals makes it well suited to multi-service access equipment.
When designing with this device, follow NXP's reference design for power sequencing, DDR2 termination, and SERDES routing. Thermal management is critical because the FCBGA package can dissipate substantial power at full load; a multi-layer PCB with adequate copper and airflow is required.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement the official hardware-specifications datasheet.
드롭인 대체품: MPC8536EAVTANG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8536EAVTANG (동일 폼 팩터 및 풋프린트) — 차이점: Memory Controller, PCI Express, Operating Temperature, Package, Security Engine.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8536EBVJANG
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8536EVTANG
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8536EAVTANGA
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$84.75 / 개
데이터시트 보기 →MPC8536EBVJATA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8536EEC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8536EAVTANG 최대 정격 & 전기적 특성
| Core Architecture | PowerPC e500 |
| Number of Cores | 1 |
| 데이터 버스 폭 | 32-bit |
| Maximum Core Frequency | 800 MHz |
| Process Technology | 90 nm CMOS |
| 패키지 | 783-FCBGA (FC-PBGA) 29x29 mm |
| 실장 유형 | Surface Mount |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| L2 Cache | Integrated |
| Memory Controller | DDR2 SDRAM with ECC |
| Ethernet | 2x 10/100/1000 Mbps eTSEC |
| PCI Express | x4 |
| Local Bus | 32-bit (16-bit muxed mode also supported) |
| Security Engine | IPSec, Kasumi, SNOW 3G acceleration |
| 동작 온도 | 0C to +105C (Tj) |
| 공급 전압 | 1.5 V / 1.8 V / 2.5 V / 3.3 V (per datasheet) |
| Series | PowerQUICC III (MPC85xx) |
MPC8536EAVTANG 783-fcbga (fc-pbga) 29x29 mm 핀 구성 가이드
MPC8536EAVTANG(783-fcbga (fc-pbga) 29x29 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8536EAVTANG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8536EAVTANG 적합 용도: 7 애플리케이션s: Enterprise Router / Switch Control Plane, Wireless Base Station Controller, VPN / UTM Security Appliance, Networked Storage Platform (NAS / iSCSI), Industrial Automation Controller, Voice over IP (VoIP) Media Gateway, Smart Grid / Substation Communications.
Enterprise Router / Switch Control Plane
The MPC8536EAVTANG's 800 MHz e500 core paired with two Gigabit Ethernet controllers (eTSEC) provides the throughput headroom required for enterprise routing and switching control plane functions. TCP/IP acceleration offloads checksum and segmentation work, freeing the core to run routing protocols like OSPF, BGP, and RIP. The hardware security engine handles IPSec tunnel encryption/decryption at line rate without dropping packets, which is critical when aggregating multiple WAN links. Its DDR2 SDRAM controller with ECC lets the device reference large routing tables reliably, while PCI Express x4 connects to a companion switching ASIC for data-plane offload.
추천
Wireless Base Station Controller
Base station controller designs benefit from the MPC8536EAVTANG's integrated security engine, which accelerates UMTS/LTE cipher suites including Kasumi and SNOW 3G in hardware. Operating at 800 MHz, the e500 core can schedule air-interface frames, handle RRC signaling, and aggregate backhaul traffic simultaneously. The local bus and PCI Express interfaces allow connection to baseband ASICs and CPRI framer ICs without external glue logic. Hardware TCP/IP offload keeps multicast traffic streams flowing at line rate, which is essential for multimedia broadcast services and small-cell deployments.
추천
VPN / UTM Security Appliance
The MPC8536EAVTANG is a strong fit for unified threat management (UTM) gateways because its security engine performs AES, 3DES, Kasumi, and SNOW 3G crypto at line rate, offloading encryption from the e500 core so it can run stateful firewall inspection and intrusion detection. Dual Gigabit Ethernet ports provide a clean WAN-to-LAN segmentation path, and PCI Express enables expansion to additional NICs for multi-WAN uplinks. The integrated DDR2 controller with ECC ensures memory integrity during long-uptime deployments under heavy packet load.
추천
Networked Storage Platform (NAS / iSCSI)
In NAS and iSCSI storage platforms, the MPC8536EAVTANG drives file system operations, manages iSCSI target handlers, and controls RAID engines over PCI Express. The DDR2 controller with ECC is well sized for caching the on-disk metadata structures used by EXT4 or JFFS2 file systems. Two Gigabit Ethernet ports enable link aggregation or dedicated iSCSI and management networks. The local bus connects to flash ROM, EEPROM, and FRAM for system firmware and configuration storage.
추천
Industrial Automation Controller
Industrial PLC and HMI designs benefit from the MPC8536EAVTANG's mix of Gigabit Ethernet, local bus, and PCI Express in one SoC, allowing a single device to drive Ethernet/IP, Modbus-TCP, and PROFINET while also interfacing to FPGA-based motion controllers. The 90 nm process and FCBGA package are rated 0C to +105C junction for industrial enclosures. Real-time interrupt handling by the e500 core supports deterministic control loops, and the hardware security engine secures remote firmware updates.
추천
Voice over IP (VoIP) Media Gateway
The MPC8536EAVTANG suits VoIP media gateways because the e500 core can compress and decompress G.711/G.729 voice streams while PCI Express links to a DSP or audio CODEC. The hardware TCP/IP acceleration reduces latency for SIP/TLS signaling, and the local bus provides glue-free connection to TDM framer ICs for legacy PSTN interfaces. The security engine secures SIP over TLS and SRTP media streams with minimal CPU overhead, which is critical when handling hundreds of simultaneous calls.
추천
Smart Grid / Substation Communications
Substation gateways using IEC 61850 protocol stacks can use the MPC8536EAVTANG as the central processing element because the hardware security engine handles authentication and confidentiality for GOOSE and SV multicast messages. The dual Gigabit Ethernet ports provide process-bus and station-bus separation, while PCI Express allows expansion to additional serial ports for legacy RTU protocols. The DDR2 ECC controller maintains memory integrity across harsh grid environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8536EAVTANG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8536EBVJANG | MPC8536EVTANG | MPC8536EAVTANGA | MPC8536EBVJATA | MPC8536EEC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (FC-PBGA) 29x29 mm | 783-FCBGA (FC-PBGA) 29x29 mm - same | 783-FCBGA (FC-PBGA) 29x29 mm - same | 783-FCBGA (FC-PBGA) 29x29 mm - same | 783-FCBGA (FC-PBGA) 29x29 mm - same | 783-FCBGA (FC-PBGA) 29x29 mm - same |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Core Frequency | 800 MHz | 667 MHz (different speed bin) | 800 MHz | 800 MHz | 667 MHz (different speed bin) | 800 MHz |
| Operating Voltage | 1.5 V / 1.8 V / 2.5 V / 3.3 V | 1.5 V / 1.8 V / 2.5 V / 3.3 V | 1.5 V / 1.8 V / 2.5 V / 3.3 V | 1.5 V / 1.8 V / 2.5 V / 3.3 V | 1.5 V / 1.8 V / 2.5 V / 3.3 V | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Ethernet Controllers | 2x 10/100/1000 eTSEC | 2x 10/100/1000 eTSEC | 2x 10/100/1000 eTSEC | 2x 10/100/1000 eTSEC | 2x 10/100/1000 eTSEC | 2x 10/100/1000 eTSEC |
| Security Engine | Yes (IPSec, Kasumi, SNOW 3G) | Yes (IPSec, Kasumi, SNOW 3G) | Yes (IPSec, Kasumi, SNOW 3G) | Yes (IPSec, Kasumi, SNOW 3G) | Yes (IPSec, Kasumi, SNOW 3G) | Yes (IPSec, Kasumi, SNOW 3G) |
| Memory Controller | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC |
주요 차별점
- Integrated hardware security engine for IPSec/Kasumi/SNOW 3G at line rate (vs Generic ARM-based communications processors without dedicated crypto blocks)
- Dual Gigabit Ethernet with TCP/IP hardware offload (vs Single-GbE or PCIe-attached multi-port controllers)
- DDR2 controller with ECC in a single SoC (vs Discrete processor + external memory controller FPGA)
- Mature PowerQUICC III ecosystem with reference firmware and Linux BSP (vs Newer QorIQ devices requiring fresh firmware development)
설계 노트
The 783-FCBGA package dissipates substantial power at 800 MHz with full peripheral activity (Estimated: ~5-8W typical). A multi-layer PCB stack-up with at least 4 signal layers and at least 2 power/ground planes is required; the power planes provide both decoupling and thermal spreading. For still-air enclosures, position the device near a forced-air flow path or add a small heatsink with thermal interface material per NXP's AN3340 documentation.
DDR2 routing must meet NXP's length-matching and impedance requirements: data strobe length matches data byte lanes within 50 mils; VREF trace must be properly bypassed and isolated from digital switching noise. SERDES lanes require 100-ohm differential routing with continuous reference plane and matched lengths within 5 mils. Place decoupling capacitors as close to each power pin as practical, using a mix of 0.1 uF ceramic and bulk tantalum bypass.
Avoid mixing 32-bit and 16-bit local bus modes without reviewing the boot configuration word - the local bus width is latched at PORESET de-assertion and cannot be changed at runtime. Ensure the boot sequencer fetches a valid reset configuration from the I2C EEPROM or SPI flash; missing or corrupt configuration results in the device staying in reset. The HRESET_REQ signal must be left disconnected or pulled high during normal operation to prevent unwanted resets.
Power sequencing on the MPC8536EAVTANG requires bringing up the core supply (1.0V/1.5V depending on speed bin) before the I/O supplies, then driving HRESET after the supplies stabilize. Use a power-sequencer IC or the PORESET input combined with the on-board microcontroller. The hardware specs require the I/O supply to be within 200 mV of nominal before the core supply ramps.
규정 준수 정보
Compliance status not provided in verified web data. RoHS/REACH/pb-free should be confirmed with NXP or your distributor before placing production orders.
