MPC8547VTATGB - 1.2GHz PowerQUICC III MPU 783-FCBGA | NXP
부품 번호: MPC8547VTATGB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $185 | $185.00 |
| 10 | $175 | $1,750.00 |
| 100 | $162 | $16,200.00 |
| 500 | $148 | $74,000.00 |
| 1,000 | $135 | $135,000.00 |
MPC8547VTATGB 개요
What is a PowerQUICC processor? PowerQUICC is a family of Power Architecture-based communications processors from NXP/Freescale designed for embedded routers, switches, and storage platforms. The III generation added multi-GHz e500 cores, integrated security, and high-speed serial interfaces. Within the wider taxonomy, PowerQUICC III is a category of microprocessor -> CPU -> SoC -> IC, and remains the canonical choice for legacy telecom and networking designs.
Key features include a 32-bit e500 core with double-precision FPU, 32 KB I-cache / 32 KB D-cache, 256 KB unified L2 cache, integrated DDR2 memory controller with ECC, three Gigabit Ethernet MACs plus an XAUI 10-Gigabit interface, four PCI Express lanes, two Serial RapidIO ports, and a hardware security engine for DES, 3DES, AES, and SHA acceleration. A 64-bit local bus and I2C, DUART, and GPIO complete the peripheral set.
Architecturally the e500 core uses 7-stage pipeline dual-issue superscalar execution, while the integrated memory controller supports up to 1 GB of DDR2 with 72-bit ECC. The high-speed serial block delivers true line-rate multi-gigabit throughput, eliminating external PHY bottlenecks for SAN, NAS, and edge-router platforms.
Typical applications include enterprise routers and switches, SAN/NAS controllers, secure gateways, industrial control with deterministic networking, and line-card controllers in modular communications chassis. Its security engine also makes it a common choice for IPsec/SSL accelerators in mid-range networking gear.
Design consideration: route the 1.1 V core rail as a 4-layer star with wide pours and place decoupling within 5 mm of every power ball. Match the four DDR2 clock pair lengths within 25 mils to maintain signal integrity at 533 MHz.
This page synthesizes distributor pricing, drop-in equivalents, and design guidance not found in the manufacturer datasheet. Data verified against distributor listings as of 2026-10-17.
드롭인 대체품: MPC8547VTATGB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8547VTATGB (동일 폼 팩터 및 풋프린트) — 차이점: Security Engine, Mounting Type, Operating Temperature, Package / Case, Process Technology.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8548VTAQGB
✅ 드롭인✓ 재고 있음
$340 / 개
데이터시트 보기 →MPC8547VTAQGB
✅ 드롭인✓ 재고 있음
$72.4 / 개
데이터시트 보기 →MPC8547VTANGB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548EVTAQGB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548ECPXAUJC
✅ 드롭인✓ 재고 있음
$189.9 / 개
데이터시트 보기 →MPC8547VTATGB 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC III, MPC85xx |
| Processor Core | PowerPC e500 (32-bit) |
| Core Count | 1 |
| Speed (Max) | 1.2 GHz |
| Process Technology | 0.09 um CMOS |
| Core Voltage | 1.1 V |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| L1 Cache (I/D) | 32 KB / 32 KB |
| L2 Cache | 256 KB unified |
| Memory Controller | DDR2 with ECC up to 1 GB |
| Ethernet MACs | 3 x 10/100/1000 + 1 x 10 Gbit XAUI |
| PCI Express Lanes | 4 |
| Serial RapidIO Ports | 2 |
| Security Engine | AES, DES/3DES, SHA |
| 패키지 / 케이스 | 783-FCBGA (29x29 mm) |
| 동작 온도 | -40C to +105C (industrial) |
| 실장 유형 | Surface Mount (BGA) |
| RoHS 상태 | Lead-free (PB Free) |
MPC8547VTATGB 783-fcbga (29x29 mm) 핀 구성 가이드
MPC8547VTATGB(783-fcbga (29x29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8547VTATGB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8547VTATGB 적합 용도: 6 애플리케이션s: Enterprise Routers and Switches, SAN/NAS Storage Controllers, Industrial Secure Gateways, Wireless Base Station Controllers, Line Card Processors in Modular Chassis, Embedded Computing for Defense and Aerospace.
Enterprise Routers and Switches
The MPC8547VTATGB fits enterprise edge and aggregation routers needing line-rate multi-gigabit throughput with deterministic latency. Its three Gigabit Ethernet MACs plus one 10 Gbit XAUI interface allow direct termination of multiple WAN/LAN links without external switch silicon, while the integrated security engine offloads IPsec and MACsec to free the e500 core for routing and QoS processing. Power consumption at 1.2 GHz is approximately 8 W, well within the thermal envelope of a fan-cooled router chassis.
추천
SAN/NAS Storage Controllers
The MPC8547VTATGB is widely deployed in mid-range SAN and NAS controllers because its four PCI Express lanes provide direct connection to PCIe-attached SAS or Fibre Channel controllers without a bridge. The two Serial RapidIO ports enable high-bandwidth backplane interconnect in modular storage chassis, while the DDR2 controller with ECC handles large read/write buffers critical for RAID acceleration. The hardware security engine accelerates AES-XTS for self-encrypting drives.
추천
Industrial Secure Gateways
Industrial secure gateways use the MPC8547VTATGB to terminate VPN tunnels, enforce firewall policies, and bridge legacy industrial protocols onto IP networks. The hardware crypto engine delivers line-rate IPsec at multi-gigabit speeds, and the -40C to +105C operating range tolerates factory and outdoor cabinet conditions. Three Gigabit Ethernet MACs provide redundant WAN/LAN/DMZ segmentation in a single SoC.
추천
Wireless Base Station Controllers
Wireless base station and small-cell controllers leverage the MPC8547VTATGB's combination of Gigabit Ethernet, RapidIO, and PCI Express to aggregate baseband, radio, and backhaul traffic in a single SoC. The 1.2 GHz e500 core handles Layer 2/3 switching and OAM processing while the dedicated security engine secures backhaul links. Deterministic interrupt latency makes it suitable for real-time radio coordination tasks.
추천
Line Card Processors in Modular Chassis
In modular communications chassis, the MPC8547VTATGB serves as the per-slot line-card processor, where its Serial RapidIO ports link to a central fabric and its PCI Express lanes attach to PHY or framer ASICs. The 783-FCBGA footprint is shared with the MPC8548 family, allowing OEMs to ship multiple line-card SKUs from one PCB design. Hot-swap and I2C management interfaces are fully supported by the integrated peripherals.
추천
Embedded Computing for Defense and Aerospace
The MPC8547VTATGB is used in defense and aerospace embedded computing platforms where its deterministic e500 core, ECC-protected DDR2 controller, and rugged industrial temperature range meet mission-critical reliability requirements. The hardware crypto engine supports Type-1 and Suite-B algorithms when paired with external tamper-resistant silicon, and the PCI Express and RapidIO interfaces connect to FPGA co-processors for signal processing.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8547VTATGB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8548VTAQGB | MPC8547VTAQGB | MPC8547VTANGB | MPC8548EVTAQGB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) |
| Core Speed | 1.2 GHz | 1.5 GHz | 1.0 GHz | 1.2 GHz | 1.5 GHz |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| Ethernet MACs | 3 x 1G + 1 x 10G XAUI | 3 x 1G + 1 x 10G XAUI | 3 x 1G + 1 x 10G XAUI | 3 x 1G + 1 x 10G XAUI | 3 x 1G + 1 x 10G XAUI |
| PCI Express Lanes | 4 | 4 | 4 | 4 | 4 |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +85C | -40C to +105C |
| Unit Price (1000 qty) | 135 USD | 165 USD | 120 USD | 128 USD | 180 USD |
| Security Engine | Standard | Standard | Standard | Standard | Enhanced |
주요 차별점
- Highest-volume 1.2 GHz 783-FCBGA PowerQUICC III variant (vs MPC8548VTAQGB)
- Industrial temperature grade up to +105C (vs MPC8547VTANGB)
- Standard security engine at mid-range price point (vs MPC8548EVTAQGB)
설계 노트
Estimated: at 1.2 GHz core clock and full peripheral utilization, total power dissipation is about 8 W. Route the 1.1 V core rail as a 4-layer star with at least 2 oz copper pours. Place 22 uF polymer bulk plus 0.1 uF ceramic decoupling within 5 mm of every power ball. The 1.8 V / 2.5 V / 3.3 V I/O rails should each carry their own filtered supply derived from a common 5 V or 12 V input.
The 783-FCBGA package has a theta_JA of approximately 18 C/W with a 4-layer JEDEC test board. At 8 W dissipation, junction-to-ambient rise is about 144 C, so a heatsink with thermal interface material is mandatory for continuous operation. Estimate: ambient at +55 C in a sealed enclosure, junction temperature settles around 199 C, which exceeds the +125 C Tj max. Either derate ambient to <= 35 C or upgrade to a heat-pipe cooled chassis.
Match DDR2 clock pair lengths within 25 mils and route the four PCI Express lanes as 90 ohm differential pairs with intra-pair skew under 5 mils. Use 8 mil microvias on the BGA break-out layer. The XAUI and Serial RapidIO SerDes lanes each require 100 ohm differential routing and AC-coupling capacitors at the transmitter, per NXP hardware specification notes.
Do not assume the XAUI, PCIe, and RapidIO interfaces can all operate simultaneously; they share the same SerDes block and must be configured at boot. Failure to set the correct RCW (Reset Configuration Word) for the desired high-speed lane map is the most common board bring-up issue. Always program the boot ROM with the lane-map header that matches your PCB topology before first power-up.
규정 준수 정보
RoHS-compliant per NXP product page and distributor listings; lead-free FCBGA package. Not AEC-Q100 qualified (industrial, not automotive).