MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP
부품 번호: MPXN2120VMG116 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MPXN2120VMG116 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O on one device. Within the embedded-computing hierarchy, this part is a 32-bit MCU, a semiconductor used to execute firmware, acquire inputs, control outputs, and manage communication interfaces. Its e200z650 core provides the processing platform while the PX Series integration reduces the number of external devices required in a gateway controller.
The verified product data identifies 2 MB (2M x 8) flash memory, a 116 MHz operating frequency, 155 I/O, and a 208-MAPBGA package. Connectivity listed in the available source data includes CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripherals include DMA, power-on reset, PWM, and watchdog timer. These interfaces make the device applicable to connected industrial equipment, transport systems, and network-edge controllers where multiple serial buses and deterministic peripheral handling are useful.
The MPXN2120VMG116 is reported as obsolete by one data result, although distributor listings also identify NXP and Rochester Electronics inventory records. Lifecycle and sourcing should therefore be confirmed for the exact production quantity. The 208-ball package also demands careful PCB layout and assembly planning because its fine routing density increases assembly complexity compared with leaded or lower-ball-count packages.
For new designs, engineers should evaluate current NXP product options rather than assuming an obsolete gateway MCU is suitable for a long production run. When maintaining an existing MPXN2120VMG116 design, validate the exact package, pin mapping, power architecture, clock configuration, memory map, and firmware against the relevant NXP documentation before assembly or repair.
This page consolidates the verified distributor specifications, lifecycle information, package details, interface list, sourcing links, and design considerations for this obsolete PX Series microcontroller. It does not infer undocumented electrical ratings, pin names, or replacement parts.
드롭인 대체품: MPXN2120VMG116 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPXN2120VMG116 (동일 폼 팩터 및 풋프린트) — 차이점: Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPXN2120VMG116
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →SPC5668GK0VMGR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MK61FX512VMJ15
✅ 드롭인✓ 재고 있음
$18.1 / 개
데이터시트 보기 →MPXN2120VMG116 최대 정격 & 전기적 특성
| Product Type | 32-bit microcontroller |
| Manufacturer | NXP Semiconductors |
| Series | PX |
| Core Processor | e200z650 |
| Core Size | 32-bit |
| Maximum Clock Speed | 116 MHz |
| Program Memory Size | 2 MB (2M x 8) |
| Program Memory Type | FLASH |
| Number of I/O | 155 |
| Connectivity | CANbus, I²C, LINbus, SCI, SPI, UART/USART |
| Peripherals | DMA, POR, PWM, WDT |
| 패키지 | 208-MAPBGA (17x17 mm) |
| Terminal Count | 208 |
| Terminal Form | Ball |
| Package Shape | Square |
| Temperature Grade | Industrial |
| 수명 주기 상태 | Obsolete |
MPXN2120VMG116 square 핀 구성 가이드
MPXN2120VMG116(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPXN2120VMG116.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPXN2120VMG116 적합 용도: 6 애플리케이션s: Industrial Network Gateway, Automotive Transport Controller, Motor and Actuator Control, Building and Sensor Gateway, Data Acquisition and Logging, Legacy Communication Equipment.
Industrial Network Gateway
The MPXN2120VMG116 fits legacy industrial gateway work because its verified e200z650 32-bit core operates at 116 MHz and includes 2 MB of flash for gateway firmware. Its listed CANbus, I²C, LINbus, SPI, SCI, and UART/USART interfaces allow the controller to bridge multiple field and service networks. A gateway design can place protocol tasks and data buffering on the MCU while DMA, PWM, and the watchdog support responsive peripheral and system management. The principal constraint is obsolescence: production sourcing should use traceable inventory, and the 208-MAPBGA requires an assembly process capable of handling fine-pitch balls.
추천
Automotive Transport Controller
The MPXN2120VMG116 is applicable to legacy transport-control platforms because it combines a 116 MHz 32-bit processor, 2 MB flash, 155 I/O, CANbus, LINbus, SCI, and UART/USART in one industrial-grade device. These resources support interface aggregation, diagnostic communication, and distributed control across vehicle subsystems. The design must still verify actual transceiver requirements, operating-temperature limits, power rails, wake and sleep behavior, and safety implications because those values are absent from the supplied data. For an existing qualified design, preserving firmware and board behavior is the main reason to retain this obsolete MCU during a controlled migration.
추천
Motor and Actuator Control
For legacy actuator systems, the MPXN2120VMG116 offers a 116 MHz processing platform, 2 MB program storage, 155 I/O, PWM, DMA, and multiple serial interfaces. These features support motor sequencing, remote diagnostics, sensor acquisition, and coordination between a local controller and external network equipment. The verified data does not establish timer resolution, PWM frequency, capture channels, ADC specifications, or real-time latency, so control-loop suitability must be proven from official NXP documentation. Because the lifecycle status is obsolete, new platforms should benchmark the MCU against currently supported control devices rather than standardizing it without a supply-risk review.
추천
Building and Sensor Gateway
The MPXN2120VMG116 can serve as a legacy sensor-concentration node when a system already supports its PX Series architecture. Its 2 MB flash can hold networking and configuration firmware, while CANbus, LINbus, I²C, SPI, and UART/USART provide paths to sensors, service ports, and upstream controllers. The 155 I/O count also supports denser equipment integration than a low-pin microcontroller. Engineers should verify actual I/O multiplexing, voltage levels, timing, and peripheral electrical limits because the verified data does not provide those details. A hardware-assisted watchdog and DMA can improve responsiveness, but both require firmware and board-level validation.
추천
Data Acquisition and Logging
The 116 MHz e200z650 core, 2 MB flash, DMA capability, and 155 I/O make the MPXN2120VMG116 suitable for maintaining legacy acquisition equipment that must combine local control with buffered transfers. SPI and I²C can serve sensors or storage devices, while serial interfaces can move processed data to a host or communications module. DMA may reduce processor involvement during transfers, although channel count, throughput, and timing are not supplied and must be checked in official documentation. This application is most defensible as an obsolescence-management use case where firmware and hardware are already proven.
추천
Legacy Communication Equipment
MPXN2120VMG116 is a practical continuity choice for legacy communication equipment whose firmware and board were designed around the e200z650 PX Series MCU. Its listed SPI, SCI, UART/USART, CANbus, I²C, and LINbus connectivity supports protocol bridging and service interfaces, while 2 MB flash provides room for embedded networking functions. Obsolete status means procurement, tooling, and long-term repair planning should be addressed simultaneously. Before approving continued use, preserve the current firmware build environment, verify bootloader behavior, and confirm that the exact 208-MAPBGA component remains electrically and mechanically compatible with the existing assembly.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPXN2120VMG116 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
주요 차별점
- Higher verified program-memory capacity than the named MK61 comparison candidate (vs MK61FX512VMJ15)
- Specific e200z650 platform continuity for maintained PX Series equipment (vs SPC5668GK0VMGR)
- Dense 155-I/O integration in a documented 208-MAPBGA outline (vs MK61FX512VMJ15)
설계 노트
Do not treat a 208-ball package or an e200z-family label as proof of drop-in compatibility. The supplied search results name SPC5668GK0VMGR and MK61FX512VMJ15 only as comparison candidates; they do not establish identical ball maps, voltage rails, clock pins, boot behavior, memory, or peripheral routing. The target also has 2 MB flash, while the comparison snippet gives 512 KB for MK61FX512VMJ15. Require an official cross-reference and complete schematic, pin, memory-map, and firmware review before substitution.
Use the exact manufacturer-approved 208-MAPBGA land pattern rather than a generic BGA footprint. The verified data confirms a 17 mm by 17 mm square package and 208 balls but does not state ball pitch, pad geometry, or the ball-map revision. Preserve escape routing, power and ground distribution, and assembly process parameters from the released PCB design. A new layout must accommodate fine-pitch inspection, X-ray analysis, and component-solderability requirements, with careful decoupling placed according to the official pinout and power architecture.
Do not design the power tree from the distributor snippets alone. Supply-voltage limits, core and I/O voltage requirements, current consumption, power sequencing, and external regulator recommendations are marked as data needed because they are absent from the supplied evidence. Obtain the authoritative NXP device documentation, then validate startup, shutdown, reset, brownout, and peripheral-I/O voltage compatibility. For an existing assembly, compare every populated power and ground connection with the exact package revision to avoid damaging an obsolete MCU during maintenance.
Obsolete status should trigger a controlled continuity plan rather than an unrestricted new launch. Secure traceable inventory, retain the exact ordering code and package revision, preserve firmware and toolchain versions, and document test procedures. Distributor page presence does not prove current stock or authorization. Require date-code, lot, storage-history, visual-inspection, and counterfeit-screening information, and avoid marketplace inventory when no provenance can be established.
규정 준수 정보
The supplied product and distributor snippets do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Industrial temperature grade is verified, but it is not evidence of AEC-Q100 qualification.
