PIC32MX775F512HT-80V/MR - 80MHz 512KB Flash MCU | Microchip
부품 번호: PIC32MX775F512HT-80V/MR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.95 | $6.95 |
| 10 | $6.21 | $62.10 |
| 100 | $5.5 | $550.00 |
| 500 | $4.92 | $2,460.00 |
| 1,000 | $4.4 | $4,400.00 |
PIC32MX775F512HT-80V/MR 개요
A 32-bit microcontroller (MCU) is a programmable processor core built on a wider data path than legacy 8/16-bit parts, allowing a single instruction to operate on 32-bit words. Within the broader taxonomy, this device sits as: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family. The PIC32MX5/6/7 series specifically targets embedded connectivity applications where on-die Ethernet plus USB and CAN reduce BOM and board area.
Key features include 512 KB Flash program memory, 64 KB SRAM data memory, 53 digital I/O pins, 80 MHz core clock (the 50 MHz figure sometimes cited refers to peripheral bus), 2.3 V to 3.6 V supply, on-chip 10-bit ADC, DMA controller, and industrial-grade -40 C to +105 C operating range. The T-suffix denotes tape-and-reel delivery for high-volume assembly.
Architecturally, the device combines a MIPS32 M4K RISC core with dedicated peripheral engines for USB-OTG, CAN 2.0, and 10/100 Ethernet MAC, allowing real-time communication workloads to run without CPU saturation. The integrated DMA offloads memory-to-peripheral transfers, leaving the core free for application logic.
Typical applications include industrial Ethernet gateways, USB-OTG device controllers, CAN-based automotive or industrial sensor nodes, embedded web servers, and home/building automation. The combination of integrated Ethernet and USB-OTG makes the PIC32MX775 particularly attractive for IoT edge nodes that must speak both protocols concurrently.
When designing, allocate sufficient decoupling on each VDD pin and connect the exposed die pad (EP) to a low-impedance ground plane for thermal dissipation and EMI performance. Verify that MPLAB Harmony stack configuration matches the exact silicon revision to avoid driver mismatches.
This page synthesizes distributor pricing, drop-in alternative MPNs, and design notes not found in the standalone datasheet, giving procurement and engineering teams a one-stop reference.
드롭인 대체품: PIC32MX775F512HT-80V/MR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX775F512HT-80V/MR (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core Architecture, Operating Temperature, CAN.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MX775F512HT-80I/MR
✅ 드롭인✓ 재고 있음
$7.88 / 개
데이터시트 보기 →PIC32MX775F512H-80V/PT
✅ 드롭인✓ 재고 있음
$8.59 / 개
데이터시트 보기 →PIC32MX695F512HT-80I/MR
✅ 드롭인✓ 재고 있음
$8.42 / 개
데이터시트 보기 →PIC32MX675F512HT-80V/MR
✅ 드롭인✓ 재고 있음
$6.05 / 개
데이터시트 보기 →PIC32MX764F128HT-V/MR
✅ 드롭인✓ 재고 있음
$4.75 / 개
데이터시트 보기 →PIC32MX440F512HT-80V/MR
✅ 드롭인✓ 재고 있음
$5.25 / 개
데이터시트 보기 →PIC32MX775F512HT-80V/MR 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 M4K |
| Core Width | 32-bit |
| Max CPU Frequency | 80 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Data Memory (SRAM) | 64 KB |
| 공급 전압 | 2.3 V to 3.6 V |
| I/O Pins | 53 |
| ADC | 10-bit |
| Communication Interfaces | USB-OTG, 2x CAN 2.0, 10/100 Ethernet MAC |
| DMA | Yes |
| 패키지 | VQFN-64 (MR) 9x9 mm |
| 동작 온도 | -40 C to +105 C (industrial) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant (LEAD FREE) |
| Package Height | 0.90 mm |
PIC32MX775F512HT-80V/MR 0.90 mm 핀 구성 가이드
PIC32MX775F512HT-80V/MR(0.90 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC32MX775F512HT-80V/MR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC32MX775F512HT-80V/MR 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, USB-OTG Device Controller, CAN-Based Industrial Sensor Node, Embedded Web Server, Home/Building Automation Controller, IoT Edge Gateway with Ethernet Backhaul.
Industrial Ethernet Gateway
The PIC32MX775F512HT-80V/MR is well suited for industrial Ethernet gateways thanks to its integrated 10/100 Ethernet MAC, USB-OTG, and dual CAN controllers. The 80 MHz MIPS32 M4K core processes TCP/IP stacks including lwIP and Microchip's Harmony TCP/IP lite, with the 64 KB SRAM holding typical receive/transmit buffers. The 512 KB Flash stores the application firmware and a substantial web interface. Operating from -40 C to +105 C, it handles factory-floor temperatures. Engineers commonly pair it with a Microchip LAN8720A or DP83848 PHY plus an external 25 MHz oscillator. Compared with discrete MCU plus external Ethernet controller solutions, this part reduces BOM by 2-3 components.
추천
USB-OTG Device Controller
The integrated USB-OTG controller on the PIC32MX775F512HT-80V/MR supports both host and device modes at full-speed and high-speed USB 2.0, removing the need for an external USB controller. The 80 MHz core easily handles USB class stacks (CDC, HID, MSD) plus application logic concurrently. The 53 available I/O pins support key matrices, LCD interfaces, and sensor inputs in USB peripherals. The 64 KB SRAM provides buffer headroom for USB descriptors and bulk transfers. Engineers commonly pair it with the MCP2200 USB-UART bridge for legacy serial devices. Compared with MCUs lacking USB-PHY integration, this part saves $0.50-$1.00 BOM per node.
추천
CAN-Based Industrial Sensor Node
The dual CAN 2.0 controllers on the PIC32MX775F512HT-80V/MR enable redundant-bus sensor node designs common in industrial automation and chassis systems. The 80 MHz MIPS32 M4K core runs CANopen and DeviceNet stacks with deterministic latency. With 53 I/O pins, the device interfaces directly to analog sensors via the 10-bit ADC and to digital sensors via SPI or I2C. The 512 KB Flash accommodates bootloader, application, and stack can handle up to 2 independent CAN networks. Industrial -40 C to +105 C temperature range meets factory and chassis deployment. Compared with MCUs having single CAN, this part enables redundant CAN topologies without an external CAN controller.
추천
Embedded Web Server
The PIC32MX775F512HT-80V/MR's 512 KB Flash and 64 KB RAM are well matched to embedded web server designs running Microchip Harmony's HTTP server or lwIP + libhttpd stacks. The integrated Ethernet MAC eliminates the cost of an external WIZnet or Microchip ENC28J60 controller. The 80 MHz MIPS32 core serves static pages at typical Ethernet rates without saturating. The 53 I/O pins control external relays, LEDs, and analog sensors via the 10-bit ADC. Industrial -40 C to +105 C operation supports remote installations. Compared with external-Ethernet-controller solutions, this part reduces BOM by $1.50-$2.00 per node.
추천
Home/Building Automation Controller
Building automation controllers using the PIC32MX775F512HT-80V/MR leverage USB-OTG for commissioning, Ethernet for IP-based control, and CAN for HVAC and lighting bus integration. The 80 MHz core runs a TCP/IP server, BACnet or KNX gateway, and real-time control loops concurrently. The 512 KB Flash accommodates bootloader, application, and multiple protocol stacks. The 53 I/O pins support triac controls, opto-isolated inputs, and PWM outputs for lighting dimming. Operating from -40 C to +105 C, the device handles plenum and outdoor enclosure environments. Compared with multi-chip solutions, this single MCU replaces MCU + Ethernet controller + USB controller.
추천
IoT Edge Gateway with Ethernet Backhaul
The PIC32MX775F512HT-80V/MR is a strong fit for IoT edge gateways that aggregate sensor data over USB, CAN, or SPI and forward it to the cloud via Ethernet. The 80 MHz MIPS32 M4K core runs MQTT or HTTP client stacks plus sensor processing. With 512 KB Flash and 64 KB SRAM, the device handles TLS handshakes using mbedTLS without dropbear reservations. The integrated DMA offloads high-throughput sensor reads, leaving the core free for protocol work. The -40 C to +105 C temperature range supports outdoor enclosures. Compared with ARM Cortex-M3/M4 alternatives, this part provides integrated Ethernet + USB-OTG at lower BOM cost.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MX775F512HT-80V/MR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MX775F512HT-80I/MR | PIC32MX695F512HT-80I/MR | PIC32MX675F512HT-80V/MR | PIC32MX764F128HT-V/MR |
|---|---|---|---|---|---|
| Package | VQFN-64 (MR) 9x9 mm | VQFN-64 (MR) - same | VQFN-64 (MR) - same | VQFN-64 (MR) - same | VQFN-64 (MR) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB |
| SRAM | 64 KB | 64 KB | 128 KB | 64 KB | 32 KB |
| CAN Controllers | 2 | 2 | 1 | 1 | 2 |
| USB-OTG | Yes | Yes | Yes | Yes | Yes |
| Ethernet MAC | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
| Operating Temperature | -40 C to +105 C | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C | -40 C to +105 C |
주요 차별점
- Integrated Ethernet MAC + USB-OTG + dual CAN in one MCU (vs PIC32MX440F512HT-80V/MR)
- Higher SRAM vs PIC32MX764 family (vs PIC32MX764F128HT-V/MR)
- Dual CAN vs single CAN in 695/675 sub-versions (vs PIC32MX675F512HT-80V/MR)
설계 노트
Place 0.1 uF decoupling capacitors on each VDD pin and a single bulk 10 uF tantalum or aluminum polymer capacitor close to the MCU. Connect the exposed die pad (EP) of the VQFN-64 package to a low-impedance ground plane using at least 9 thermal vias (0.3 mm diameter) for heat removal and EMI suppression. Estimated: this configuration typically yields theta_JA below 30 C/W.
PIC32MX silicon is revision-sensitive; verify the device ID with the pic32mx_get_device_id() function at boot to ensure your firmware matches the silicon revision. Microchip ships revision A3 and later revisions with subtle errata affecting the ADC and I2C peripherals. According to Microchip errata documents, using the wrong revision's firmware can lock up the USB peripheral or cause ADC drift on certain channels.
Route the USB-OTG D+ and D- traces as a 90-ohm differential pair with continuous ground reference. Keep the pair length-matched within 150 mils and avoid any via stubs. Per the Microchip PIC32MX5XX/6XX/7XX family datasheet, USB signal integrity requires a series 27-ohm resistor on each line near the MCU pin plus an external ESD protection diode array. The Ethernet MAC differential traces also require 100-ohm differential impedance to the RJ45 magnetics.
규정 준수 정보
RoHS compliant per Microchip product listing; lead-free VQFN package confirmed. AEC-Q100 not applicable (industrial/consumer grade). REACH and halogen status not explicitly stated in verified data.
