PIC32MZ1024ECM064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
부품 번호: PIC32MZ1024ECM064-I/MR ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.45 | $9.45 |
| 10 | $8.85 | $88.50 |
| 100 | $7.95 | $795.00 |
| 500 | $7.1 | $3,550.00 |
| 1,000 | $6.4 | $6,400.00 |
PIC32MZ1024ECM064-I/MR 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals around a common bus. The PIC32MZ EC family sits in the high-performance tier of Microchip's 32-bit portfolio, positioned between mainstream Cortex-M4/M7 parts and dedicated application processors. Within the broader hierarchy, the PIC32MZ EC is a microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded connectivity MCU -> semiconductor IC.
Key differentiating features include the hardware crypto engine for AES, 3DES, SHA, and MD5 acceleration, a Hi-Speed USB 2.0 OTG controller with integrated PHY, a 10/100 Mbps Ethernet MAC with RMII/MII interface, and six UART, four I2C, and four SPI peripherals for multi-bus connectivity. The dual-panel Flash architecture enables live firmware updates without CPU stall, critical for industrial and IoT applications that must remain online during OTA rollouts.
The microAptiv core includes a DSP-enhanced pipeline with four 64-bit accumulators, single-cycle MAC, and saturating/fractional math, enabling real-time audio, motor control, and signal-processing workloads. The integrated FPU is absent on this part, but floating-point emulation runs efficiently in microMIPS mode. The 28-channel, 12-bit 1.2 MSPS ADC paired with six analog comparators supports precision sensor acquisition in motor control and instrumentation front-ends.
Typical applications include industrial Ethernet gateways, USB-enabled HMI panels, secure IoT edge nodes with TLS offload, motor control BLDC/PMSM drives, and audio processing front-ends that benefit from the live-update Flash. The 64-VQFN package with 9x9 mm footprint also suits space-constrained designs where TQFP would be impractical. Cryptographic acceleration and TRNG make the EC family a fit for any connected device requiring hardware-rooted identity and TLS 1.2/1.3 handshake acceleration.
When designing with this MCU, allocate decoupling capacitance of at least 0.1 microfarad per Vdd/Vss pair placed within 5 mm of the supply pins, and provide a 12 MHz primary crystal or resonator to drive the PLL that synthesizes the 200 MHz system clock. Do not exceed 3.6 V on any I/O pin; 5 V tolerant pins must be configured and treated as high-voltage inputs only.
This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC32MZ EC family, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: PIC32MZ1024ECM064-I/MR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ1024ECM064-I/MR (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, DMA Channels, Ethernet, I/O Pins.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ1024ECM064-E/MR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ1024ECG064-I/MR
✅ 드롭인✓ 재고 있음
$8.9 / 개
데이터시트 보기 →PIC32MZ0512EFK064T-I/MR
✅ 드롭인✓ 재고 있음
$5.93 / 개
데이터시트 보기 →PIC32MZ1024ECG064-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ1024ECH064-I/PT
✅ 드롭인✓ 재고 있음
$7.2 / 개
데이터시트 보기 →PIC32MX795F512H-80V/MR
✅ 드롭인✓ 재고 있음
$8.92 / 개
데이터시트 보기 →PIC32MZ1024ECM064-I/MR 최대 정격 & 전기적 특성
| Core Architecture | MIPS32 microAptiv (PIC32MZ) |
| Core Frequency | 200 MHz max |
| Performance | 330 DMIPS, 3.28 CoreMark/MHz |
| Program Flash | 1 MB (1024 KB) |
| Boot Flash | 160 KB (additional) |
| SRAM | 512 KB |
| Operating Voltage | 2.2 V to 3.6 V |
| I/O Pins | 53 (approx.) |
| 패키지 | 64-VQFN (9x9 mm) |
| 실장 유형 | Surface Mount |
| Temperature Range | -40 C to +85 C (Industrial) |
| ADC | 12-bit, up to 28 channels, 1.2 MSPS |
| USB | Hi-Speed USB 2.0 OTG with integrated PHY |
| Ethernet | 10/100 Mbps MAC (RMII/MII) |
| Crypto Engine | AES, 3DES, SHA, MD5, RNG |
| UART / I2C / SPI | 6 / 4 / 4 |
| RoHS 상태 | Compliant |
PIC32MZ1024ECM064-I/MR 핀 구성
| 핀 1 | RGND — Reference ground for Ethernet PHY |
| 핀 2 | VSS — Digital ground |
| 핀 3 | VDD — Digital supply 2.2-3.6 V |
| 핀 4 | AN0/CVD0 — Analog input 0 / ADC CVD |
| 핀 5 | AN1/CVD1 — Analog input 1 / ADC CVD |
| 핀 6 | AN2/CVD2 — Analog input 2 / ADC CVD |
| 핀 7 | AN3/CVD3 — Analog input 3 / ADC CVD |
| 핀 8 | AN4 — Analog input 4 |
| 핀 9 | AN5 — Analog input 5 |
| 핀 10 | AN6 — Analog input 6 |
| 핀 11 | AN7 — Analog input 7 |
| 핀 12 | AVSS — Analog ground |
| 핀 13 | AVDD — Analog supply |
| 핀 14 | VREF+ — ADC voltage reference positive |
| 핀 15 | VREF- — ADC voltage reference negative |
| 핀 16 | AERFDN/CVD4 — Analog/Ethernet ref or CVD4 |
| 핀 17 | SCL1 — I2C1 clock |
| 핀 18 | SDA1 — I2C1 data |
| 핀 19 | SCL2 — I2C2 clock |
| 핀 20 | SDA2 — I2C2 data |
| 핀 21 | U1RX — UART1 receive |
| 핀 22 | U1TX — UART1 transmit |
| 핀 23 | U1CTS — UART1 clear-to-send |
| 핀 24 | U1RTS — UART1 request-to-send |
| 핀 25 | U2RX — UART2 receive |
| 핀 26 | U2TX — UART2 transmit |
| 핀 27 | U3RX — UART3 receive |
| 핀 28 | U3TX — UART3 transmit |
| 핀 29 | U4RX — UART4 receive |
| 핀 30 | U4TX — UART4 transmit |
| 핀 31 | SDO1 — SPI1 data out |
| 핀 32 | SDI1 — SPI1 data in |
| 핀 33 | SCK1 — SPI1 clock |
| 핀 34 | SS1 — SPI1 slave select |
| 핀 35 | SDO2 — SPI2 data out |
| 핀 36 | SDI2 — SPI2 data in |
| 핀 37 | SCK2 — SPI2 clock |
| 핀 38 | SS2 — SPI2 slave select |
| 핀 39 | OC1 — Output compare 1 / PWM |
| 핀 40 | OC2 — Output compare 2 / PWM |
| 핀 41 | OC3 — Output compare 3 / PWM |
| 핀 42 | OC4 — Output compare 4 / PWM |
| 핀 43 | OC5 — Output compare 5 / PWM |
| 핀 44 | OC6 — Output compare 6 / PWM |
| 핀 45 | IC1 — Input capture 1 |
| 핀 46 | IC2 — Input capture 2 |
| 핀 47 | IC3 — Input capture 3 |
| 핀 48 | IC4 — Input capture 4 |
| 핀 49 | TMS — JTAG test mode select |
| 핀 50 | TCK — JTAG test clock |
| 핀 51 | TDI — JTAG test data in |
| 핀 52 | TDO — JTAG test data out |
| 핀 53 | MCLR — Master clear reset |
| 핀 54 | OSC1 — Crystal oscillator input |
| 핀 55 | OSC2 — Crystal oscillator output |
| 핀 56 | SOSC1 — Secondary oscillator input |
| 핀 57 | SOSC2 — Secondary oscillator output |
| 핀 58 | VBUS — USB VBUS sense |
| 핀 59 | D+ — USB D+ data line |
| 핀 60 | D- — USB D- data line |
| 핀 61 | VUSB3V3 — USB internal 3.3 V LDO bypass |
| 핀 62 | ETHREFCLK — Ethernet reference clock |
| 핀 63 | ERXD0 — Ethernet RX data 0 |
| 핀 64 | EPAD — Exposed thermal pad - connect to VSS |
일반적인 애플리케이션
PIC32MZ1024ECM064-I/MR 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, USB-Enabled HMI Touch Panel, Secure IoT Edge Node, BLDC / PMSM Motor Control, Audio Processing Front-End, Connected Medical Sensor Hub.
Industrial Ethernet Gateway
The PIC32MZ1024ECM064-I/MR fits industrial Ethernet gateway designs because it integrates a 10/100 Mbps MAC with RMII/MII PHY interface and a 200 MHz MIPS32 microAptiv core that closes TCP/IP and TLS handshake workloads in real time. The hardware AES/SHA crypto engine offloads TLS 1.2 handshakes and bulk data encryption, while 512 KB SRAM holds large packet buffers without external memory. Live-update dual-panel Flash lets the gateway apply security patches without rebooting the connected plant - critical for Industry 4.0 uptime targets. Reference companion parts include Microchip's KSZ8081 Ethernet PHY and ATECC608B secure element for certificate storage.
추천
USB-Enabled HMI Touch Panel
The PIC32MZ1024ECM064-I/MR is a strong fit for USB-connected HMI panels thanks to its integrated Hi-Speed USB 2.0 OTG controller with on-chip PHY, eliminating the external PHY and saving roughly 1.5 square centimeters of PCB area versus discrete solutions. The 200 MHz MIPS core drives color TFT displays up to WVGA resolution through the parallel PMP interface while servicing USB HID/touch events. The 12-bit 1.2 MSPS ADC samples touch-sensing electrodes for projected-capacitive touch overlays. Reference companion parts include the FT813 graphics controller for TFT bridging and a TSC2007 resistive touch controller.
추천
Secure IoT Edge Node
The PIC32MZ1024ECM064-I/MR fits secure IoT edge nodes because the on-chip crypto engine accelerates AES-256, SHA-256, and TLS 1.2/1.3 PRNG operations in hardware, offloading the CPU and enabling sub-100 ms cloud handshake latency. The integrated TRNG seeds device-unique keys, while the 1 MB Flash stores TLS stacks, MQTT-SN clients, and OTA payloads. Six UART and four I2C peripherals simultaneously host sensor buses, modem modules, and debug consoles. Reference companion parts include the ATECC608B secure element and a SUB-1 GHz or LoRa transceiver such as the SX1276.
추천
BLDC / PMSM Motor Control
The PIC32MZ1024ECM064-I/MR is well suited to BLDC and PMSM motor drives because the 200 MHz microAptiv core executes single-cycle MAC operations that close field-oriented control (FOC) loops well under 10 microseconds, supporting sensorless FOC for motors up to several kilowatts. The 12-bit 1.2 MSPS ADC samples phase currents at the PWM center point for minimum ripple, while six analog comparators deliver hardware over-current protection independent of the CPU. Center-aligned complementary PWM with dead-band insertion prevents shoot-through on the three-phase inverter. Reference companion parts include the IRS2003S gate driver and ACS712 current sensor.
추천
Audio Processing Front-End
The PIC32MZ1024ECM064-I/MR fits audio processing front-ends because its DSP-enhanced microAptiv pipeline with four 64-bit accumulators and single-cycle MAC executes 16/32-bit audio DSP kernels - filters, equalizers, and codecs - with low interrupt latency. microMIPS mode compresses audio code by up to 35%, leaving more Flash headroom for soundbanks. The I2S peripheral streams 48 kHz / 24-bit audio to external DACs while the 12-bit ADC captures microphone arrays. Reference companion parts include the SGTL5000 audio codec and an external Class-D amplifier such as the TPA3116D2.
추천
Connected Medical Sensor Hub
The PIC32MZ1024ECM064-I/MR supports connected medical sensor hubs because it integrates USB OTG for tethering to a host PC, Ethernet MAC for bedside monitoring network drops, and a 1.2 MSPS ADC that captures multiple bio-sensor channels at high sample rates. The hardware crypto engine secures patient data over TLS links to comply with HIPAA-grade expectations. Live-update dual-panel Flash lets certified firmware stay current without service windows. Reference companion parts include the ADS1292 medical-grade ECG AFE and an SPX3819 low-noise LDO for analog rails.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ1024ECM064-I/MR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ1024ECM064-E/MR | PIC32MZ1024ECG064-I/MR | PIC32MZ0512EFK064T-I/MR | PIC32MX795F512H-80V/MR |
|---|---|---|---|---|---|
| Package | 64-VQFN (9x9 mm) | 64-VQFN (9x9 mm) - same | 64-VQFN (9x9 mm) - same | 64-VQFN (MR-style) - same | 64-VQFN (MR) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Clock | 200 MHz | 200 MHz | 200 MHz | 252 MHz (+26%) | 80 MHz (-60%) |
| Program Flash | 1 MB (1024 KB) | 1 MB | 1 MB | 512 KB (-50%) | 512 KB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 128 KB (-75%) | 128 KB (-75%) |
| USB | Hi-Speed USB OTG | Hi-Speed USB OTG | Hi-Speed USB OTG | Hi-Speed USB OTG | Full-Speed USB only |
| Ethernet MAC | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII | 10/100 Mbps RMII/MII | None |
| Crypto Engine | AES/3DES/SHA/MD5 + TRNG | AES/3DES/SHA/MD5 + TRNG | AES/3DES/SHA/MD5 + TRNG | AES/3DES/SHA/MD5 + TRNG | None (software only) |
| Temperature Grade | Industrial -40 to +85 C | Extended -40 to +125 C | Industrial -40 to +85 C | Industrial -40 to +85 C | Industrial -40 to +85 C |
| Lifecycle | NRND | NRND | NRND | Active | Active |
주요 차별점
- Highest Flash density in 64-VQFN PIC32MZ EC family (vs PIC32MZ0512EFK064T-I/MR)
- Live-update dual-panel Flash (vs PIC32MX795F512H-80V/MR)
- On-chip crypto engine with TRNG (vs PIC32MX795F512H-80V/MR)
- Hi-Speed USB OTG with on-chip PHY (vs PIC32MX795F512H-80V/MR)
설계 노트
Place 0.1 microfarad X7R ceramic decoupling capacitors within 5 mm of every Vdd/Vss pair (typically 4-5 pairs on the 64-VQFN layout) and add a single 4.7 microfarad bulk tantalum or ceramic close to the highest-current Vdd pin. The 200 MHz core draws transient currents up to 200 mA during instruction fetches; inadequate bulk decoupling causes Vdd droop and brown-out resets. Keep analog AVDD isolated from digital VDD with a ferrite bead and provide separate decoupling on the AVSS/AVDD pair to preserve ADC accuracy.
The 64-VQFN package has an exposed thermal pad (EPAD, pin 64) that MUST be soldered to a VSS copper pour of at least 1 square centimeter to meet thermal dissipation targets and provide a low-inductance ground return. Do not route signal traces under the EPAD; instead, use thermal vias on a 1.0 mm grid connecting the EPAD to an internal VSS plane. The QFN layout footprint should follow IPC-7351 nominal density with a 0.5 mm pitch land pattern - deviation causes solder bridging between adjacent pins.
Estimated: at 200 MHz full-load with all peripherals active (USB, Ethernet, ADC), the PIC32MZ1024ECM064-I/MR draws approximately 80 mA from 3.3 V, or 264 mW. With a 64-VQFN on a 1 sq-inch 4-layer copper pour, theta_JA is around 30 C/W, giving a 8 C temperature rise above ambient. The industrial -40 to +85 C temperature grade supports 85 C ambient with margin; for 125 C extended-temperature designs choose the -E/MR variant. Provide airflow in enclosed housings to keep junction below 125 C.
Do not apply 5 V to any GPIO - the absolute maximum is 3.6 V and 5 V will permanently damage I/O cells. Configure unused I/O as outputs driving low, not as inputs floating, to avoid spurious interrupts. When using the Ethernet MAC, the ERXD/ETXD traces must be length-matched within 50 mils to the PHY and routed with 50 ohm controlled impedance. The VBUS USB pin requires a 10 kohm pull-down even when USB is unused, or the device may enter an undefined state.
Route the 12 MHz primary crystal traces (OSC1/OSC2) as short as possible, surrounded by a ground guard trace, and keep them away from switching signals like PWM or USB. The crystal load capacitors (typically 15-22 pF) should connect to a quiet ground plane rather than digital VSS noise. For EMI, place a pi-filter (ferrite + capacitor + capacitor) on each external cable connection (USB, Ethernet) and keep the digital section of the PCB at least 10 mm from these connectors.
규정 준수 정보
RoHS and lead-free confirmed by Microchip product page. The PIC32MZ EC family is not AEC-Q100 qualified; for automotive applications consult Microchip about PIC32MZ EF automotive part numbers. REACH compliance follows EU regulations per Microchip standard policy.
