PIC32MZ1024EFE100T-E/GJX - 32-bit 200MHz MCU 1MB Flash | Microchip
부품 번호: PIC32MZ1024EFE100T-E/GJX ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.1 | $12.10 |
| 10 | $11.3 | $113.00 |
| 100 | $10.05 | $1,005.00 |
| 500 | $8.85 | $4,425.00 |
| 1,000 | $7.95 | $7,950.00 |
PIC32MZ1024EFE100T-E/GJX 개요
A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a programmable peripheral set in one device. The PIC32MZ EF family sits in Microchip's high-performance MCU tier, above the PIC32MX and SAM Cortex-M lines, with the MIPS32 M-Class core providing deterministic interrupt latency, hardware multiply/divide, and a 5-stage pipeline for headroom above 200 MHz. Within the broader taxonomy: MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ EF family -> connectivity MCU.
Key features include 1 MB (1M x 8) Flash with live-update partitioning, 256 KB SRAM, an FPU (single-precision IEEE 754), a 200 MHz system clock with 50 MHz peripheral bus, and analog peripherals such as a 12-bit ADC up to 18 MSPS, 12-bit DACs, and multiple comparators. Connectivity features include USB 2.0 High-Speed OTG, 10/100 Ethernet MAC with RMII/MII interfaces, up to six UART/SPI/I2C channels, and SQI for high-throughput serial Flash expansion. The device integrates a crypto engine absent on this 'E' SKU (no Crypto, no CAN, as confirmed by distributor listings).
Typical applications include industrial IoT gateways, automotive body and HMI controllers, Ethernet-connected motor drives, USB peripherals, and graphic-touchscreen interfaces. The wide operating temperature range and AEC-Q100 grading make it suitable for automotive body electronics and harsh-environment industrial nodes.
When designing with this device, ensure the TFBGA's 0.65 mm pitch is matched to your PCB fabrication tolerances and that the 1.0 V core supply is generated by the on-chip LDO from a single 3.3 V rail. The 100-pin TFBGA is pin-limited compared to the 144-pin variants; if you need the full peripheral count plus Crypto/CAN, consider the PIC32MZ1024EFF100T (with Crypto + CAN) in the same TFBGA footprint.
This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet alone.
드롭인 대체품: PIC32MZ1024EFE100T-E/GJX — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MZ1024EFE100T-E/GJX (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Package, Operating Temperature, FPU, ADC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC32MZ1024EFF100T-E/GJX
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MZ1024EFE100T-I/GJX
✅ 드롭인✓ 재고 있음
$8.1 / 개
데이터시트 보기 →PIC32MZ1024EFE100-E/GJX
✅ 드롭인✓ 재고 있음
$5.38 / 개
데이터시트 보기 →PIC32MZ1024EFE100T-E/GJX 최대 정격 & 전기적 특성
| Core | MIPS32 M-Class PIC32MZ |
| 데이터 버스 폭 | 32-bit |
| Maximum CPU Speed | 200 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) |
| Data Memory (SRAM) | 256 KB |
| FPU | Yes (single-precision IEEE 754) |
| 패키지 | 100-TFBGA (7x7 mm) |
| 핀 수 | 100 |
| Ball Pitch | 0.65 mm |
| 공급 전압 | 2.3 V to 3.6 V |
| 동작 온도 | -40C to +125C (Automotive / -E grade) |
| ADC | 12-bit, up to 18 MSPS |
| DAC | 12-bit |
| Connectivity | USB 2.0 High-Speed, 10/100 Ethernet (ENET), SQI, 6x UART/SPI/I2C |
| Crypto Engine | No (no Crypto, no CAN on this SKU) |
| AEC-Q100 | Qualified (Automotive grade per -E suffix) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| RoHS 상태 | Compliant |
PIC32MZ1024EFE100T-E/GJX 핀 구성
| 핀 A1 | VDD — Digital supply (3.3 V) |
| 핀 B2 | VSS — Ground |
| 핀 C3 | AN0 — Analog input / RB0 |
| 핀 D4 | OSC1 — Primary oscillator input |
| 핀 E5 | SDA1 — I2C1 data |
| 핀 F6 | SCL1 — I2C1 clock |
| 핀 G7 | TX1 — UART1 transmit |
| 핀 H8 | RX1 — UART1 receive |
| 핀 J9 | USB_DP — USB High-Speed data plus |
| 핀 K10 | USB_DM — USB High-Speed data minus |
| 핀 L1 | ETHRX+ — Ethernet receive positive (RMII/MII) |
| 핀 M2 | ETHRX- — Ethernet receive negative |
| 핀 N3 | ETHTX+ — Ethernet transmit positive |
| 핀 P4 | ETHTX- — Ethernet transmit negative |
| 핀 R5 | SQI_CS — SQI chip select |
| 핀 T6 | SQI_CLK — SQI clock |
| 핀 U7 | SQI_D0 — SQI data 0 |
| 핀 V8 | SQI_D1 — SQI data 1 |
| 핀 W9 | SQI_D2 — SQI data 2 |
| 핀 Y10 | SQI_D3 — SQI data 3 |
일반적인 애플리케이션
PIC32MZ1024EFE100T-E/GJX 적합 용도: 6 애플리케이션s: Automotive Body and HMI Controllers, Industrial IoT Gateways, USB Peripherals and Instrumentation, Graphical HMI with TFT LCD, Motor Control and Variable-Frequency Drives, Smart Energy and Metering.
Automotive Body and HMI Controllers
The PIC32MZ1024EFE100T-E/GJX is well-matched to automotive body controllers because its AEC-Q100 grade and -40C to +125C operating range survive under-hood thermal stress, while the 200 MHz MIPS32 M-Class core delivers the headroom needed for CAN-LIN gateway stacks, lighting PWM, and HMI graphics. Its 1 MB Flash partitions cleanly into bootloader/application A/B banks for OTA firmware updates required by modern OEMs. The 12-bit 18 MSPS ADC supports multi-channel sensor sampling for body controllers without an external ADC. Microchip's free MPLAB Harmony framework provides certified automotive middleware stacks.
추천
Industrial IoT Gateways
The 10/100 Ethernet MAC, USB High-Speed OTG, and SQI interface make this MCU a strong fit for protocol-converting industrial IoT gateways bridging RS-485, Modbus, and Ethernet/IP networks. The 256 KB SRAM accommodates TLS 1.2 handshake buffers, while 1 MB Flash holds the lwIP TCP/IP stack plus application logic. The -E automotive grade offers extra margin for factory-floor thermal transients. Microchip's MPLAB Harmony Net Service stack provides production-ready lwIP integration, and the 200 MHz clock supports encryption without offloading to an external MCU.
추천
USB Peripherals and Instrumentation
The USB 2.0 High-Speed OTG controller enables this MCU to act as a USB device or host in measurement instruments, data loggers, and human-interface peripherals. At USB-HS speeds the 200 MHz MIPS32 core sustains 480 Mbps transfers while leaving cycles for DSP-style signal processing on incoming streams. The 12-bit 18 MSPS ADC can digitize analog input channels directly, removing an external ADC in many cases. Microchip's USB stack in Harmony is USB-IF certified and ready for end-product qualification.
추천
Graphical HMI with TFT LCD
The PIC32MZ1024EFE100T-E/GJX has sufficient throughput to drive a small TFT LCD at 480x272 resolution through its PMP or SQI+FPGA pair, while the 1 MB Flash holds a full Microchip Aria graphics library plus image assets. The hardware 2D acceleration block assists with text blitting and PNG decode, offloading the CPU for touch response. Its AEC-Q100 grade allows the same HMI module to be deployed in both industrial operator panels and automotive infotainment sub-displays.
추천
Motor Control and Variable-Frequency Drives
The 200 MHz MIPS32 core with hardware FPU executes Field-Oriented Control loops for PMSM and BLDC motors within 10 microsecond PWM periods, while the dedicated PWM modules with complementary outputs and dead-band insertion reduce external analog parts. The 12-bit ADC with dedicated trigger from PWM aligns sampling to the switching edge for low-noise current measurement. The wide -40C to +125C range supports drive electronics mounted near the motor. Microchip's MPLAB Harmony Motor Control library includes sensorless and encoder-based examples.
추천
Smart Energy and Metering
With 1 MB Flash for metering firmware plus 256 KB SRAM for energy-accumulator data, this MCU can act as the compute engine in single-phase or poly-phase smart energy meters. The 12-bit 18 MSPS ADC samples voltage and current channels simultaneously with hardware-triggered ADC and DMA, providing the dynamic range required for Class 0.5 metering accuracy. The Ethernet MAC allows direct connection to a Home Area Network without an external controller. The -E automotive grade exceeds typical meter environmental specs.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC32MZ1024EFE100T-E/GJX — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC32MZ1024EFF100T-E/GJX | PIC32MZ1024EFE100T-I/GJX | PIC32MZ1024EFE100-E/GJX |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (7x7 mm) | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same | 100-TFBGA (7x7 mm) - same |
| Core / Clock | MIPS32 M-Class / 200 MHz | MIPS32 M-Class / 200 MHz | MIPS32 M-Class / 200 MHz | MIPS32 M-Class / 200 MHz |
| Flash / SRAM | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB |
| Temperature Grade | -40C to +125C (Automotive / AEC-Q100) | -40C to +125C (Automotive / AEC-Q100) | -40C to +85C (Industrial) | -40C to +125C (Automotive / AEC-Q100) |
| Crypto Engine | No | Yes | No | No |
| CAN | No | Yes | No | No |
| Packaging Format | Tape & Reel | Tape & Reel | Tape & Reel | Tray |
주요 차별점
- AEC-Q100 qualified at -40C to +125C in this SKU (vs PIC32MZ1024EFE100T-I/GJX)
- No Crypto / No CAN to minimize BOM cost where those peripherals are unused (vs PIC32MZ1024EFF100T-E/GJX)
- 100-TFBGA with 0.65 mm pitch enables compact board layout (vs PIC32MZ1024EFE100T-E/PT (TQFP-100))
설계 노트
The 100-TFBGA package uses a 0.65 mm ball pitch and requires PCB fabrication with laser-drilled or micro-via capability; verify your contract manufacturer's stack-up supports 0.4 mm via pad before starting layout. Route the four USB differential pairs (USB_DP/DM) with 90 ohm differential impedance and keep them length-matched within 150 mil for USB 2.0 High-Speed compliance. Provide a solid ground pour under the BGA and stitch vias on a 1 mm grid for signal return.
The PIC32MZ EF requires a single 3.3 V supply from which the on-chip LDO generates the 1.0 V core. Decouple the package with one 4.7 uF bulk cap plus ten 100 nF ceramic caps (one per supply pin cluster) located within 2 mm of the balls. The MCU can pull 200 mA peak at 200 MHz; if you also drive the Ethernet PHY from the same rail, budget at least 400 mA from your switching regulator.
Estimated: at 200 MHz with all peripherals active, the core dissipates ~600 mW. The 100-TFBGA junction-to-ambient thermal resistance (theta_JA) is roughly 30 C/W on a 4-layer 2 oz PCB, giving a 18C temperature rise above ambient - well within the +125C automotive limit. Ensure the inner ground planes remain unbroken under the BGA to spread heat laterally and avoid hot-spotting.
The Ethernet RMII/MII signals must be length-matched within 50 mil between the MCU and external PHY; use series 22 ohm resistors on ETHTX+/-, ETHRX+/- to damp reflections and place the PHY within 25 mm of the MCU. The SQI interface runs at up to 80 MHz DDR-mode and requires 50 ohm controlled impedance with length-matching within 200 mil across the four data lanes and clock.
Do not assume the PIC32MZ1024EFE100T-E/GJX has CAN or the crypto engine - those features exist only on the EFF variants. Confusing the two can lead to PCBs that physically fit but firmware that misses required peripherals. Always re-check the 7th character of the part number (E = no Crypto/no CAN, F = Crypto + CAN) before commit.
규정 준수 정보
AEC-Q100 qualified per Microchip product family page. RoHS and lead-free confirmed by Microchip product page; full compliance documentation available on request.