R5F100GEAFB#10 - 16-Bit RL78/G13 MCU, 64KB Flash, 48-LFQFP | Renesas
부품 번호: R5F100GEAFB#10 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.55 | $25.50 |
| 100 | $2.1 | $210.00 |
| 500 | $1.78 | $890.00 |
| 1,000 | $1.52 | $1,520.00 |
R5F100GEAFB#10 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and peripheral interfaces into one package. Within the broader semiconductor taxonomy, the R5F100GEAFB#10 belongs to the 16-bit MCU category (a mid-range between 8-bit entry devices and 32-bit ARM Cortex-M cores), and specifically to the RL78 sub-family (a proprietary Renesas low-power ISA succeeding the legacy 78K and R8C families) targeting ultra-low-power embedded applications.
Key specifications include: 66 uA/MHz active current, 230 nA STOP-mode standby current, 1.6 V to 5.5 V supply range, 4KB data flash and 4KB SRAM, hardware multiplier/divider, multiple low-power modes (HALT, STOP, SNOOZE), and an on-chip oscillator. The device also includes a real-time clock, watchdog timer, 12-bit SAR ADC, and serial interfaces (CSI/UART/I2C) that reduce external BOM and PCB area.
Architecturally, the RL78 uses a three-stage pipelined CISC core with a 16-bit ALU and 24-bit address space, paired with separate code-flash and data-flash regions and a tightly-coupled memory controller. The CSI (Clocked Serial Interface) and UART can run concurrently from different clocks, while SNOOZE mode allows selective peripheral wake-up without full CPU restart, enabling typical current consumption under 1 uA in always-on sensor systems.
Typical applications include white-goods control boards (washing machines, dishwashers, microwave ovens), battery-powered sensor nodes, HVAC controllers, motor-control front-ends, smart meters, and industrial sensor hubs. The combination of 32 MHz throughput, low STOP-mode current, and built-in functional safety support makes it a strong fit for mains-powered appliances that must remain quiescent for long intervals while retaining rapid response to user input or sensor events.
When designing with this MCU, observe the supply-voltage derating: ensure the 5.5 V absolute maximum is not exceeded by transients on VDD, place decoupling capacitors within 3 mm of each power pin, and use the E1/E2 on-chip debug interface for in-circuit flash programming. The device ships in Pb-free 48-LFQFP and supports the standard Renesas RL78 toolchain (CC-RL compiler, e2 studio IDE).
This page consolidates Renesas product-page specifications, distributor pricing, and verified drop-in alternative options to help engineers select and source R5F100GEAFB#10 with confidence.
드롭인 대체품: R5F100GEAFB#10 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
R5F100GEAFB#V0
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F100GEAFB#50
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F100GEAFB#70
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F100GDAFB#V0
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC32MX270F512L-I/PF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
R5F100GEAFB#10 최대 정격 & 전기적 특성
| Family | RL78 |
| Series | RL78/G13 |
| Core Type | RL78 (16-bit CISC, 3-stage pipeline) |
| Maximum CPU Frequency | 32 MHz |
| DMIPS | 43.2 DMIPS at 32 MHz |
| Code Flash Size | 64 KB |
| Data Flash Size | 4 KB |
| RAM Size | 4 KB |
| Supply Voltage Range | 1.6 V to 5.5 V |
| Active Current (typ.) | 66 uA/MHz |
| Standby Current (STOP, typ.) | 230 nA |
| 동작 온도 범위 | -40 C to +85 C |
| 패키지 | 48-LFQFP (7x7 mm) |
| 실장 유형 | Surface Mount |
| A/D Converter | 10/12-bit SAR, multiple channels |
| On-chip Oscillator | Yes (high-/low-speed internal RC) |
| Safety Support | IEC/UL 60730 hardware safety function |
| Pb-free / RoHS | Yes |
R5F100GEAFB#10 핀 구성
| 핀 1 | VDD — Power supply, 1.6 V to 5.5 V |
| 핀 2 | VSS — Digital ground |
| 핀 3 | RESET — Reset input (active low) |
| 핀 4 | P137/ANI0 — Port 137 / ADC input 0 |
| 핀 5 | P130/ANI1 — Port 130 / ADC input 1 |
| 핀 6 | P41/ANI2 — Port 41 / ADC input 2 |
| 핀 7 | P40/ANI3 — Port 40 / ADC input 3 |
| 핀 8 | P147/ANI16 — Port 147 / ADC input 16 |
| 핀 9 | P146/ANI17 — Port 146 / ADC input 17 |
| 핀 10 | P145/ANI18 — Port 145 / ADC input 18 |
| 핀 11 | P144/ANI19 — Port 144 / ADC input 19 |
| 핀 12 | AVSS — Analog ground reference |
| 핀 13 | AVDD — Analog supply reference |
| 핀 14 | P10/SCK00 — Port 10 / serial clock CSI00 |
| 핀 15 | P11/SI00 — Port 11 / serial data in CSI00 |
| 핀 16 | P12/SO00 — Port 12 / serial data out CSI00 |
| 핀 17 | P13/TxD0 — Port 13 / UART0 transmit |
| 핀 18 | P14/RxD0 — Port 14 / UART0 receive |
| 핀 19 | P70/INTP0 — Port 70 / interrupt 0 |
| 핀 20 | P71/INTP1 — Port 71 / interrupt 1 |
| 핀 21 | P72/INTP2 — Port 72 / interrupt 2 |
| 핀 23 | P80/TOOL0 — Port 80 / debug tool data |
| 핀 24 | TOOL1 — Debug tool clock |
| 핀 25 | RESET2 — Reset configuration pin |
| 핀 26 | X1 — Crystal oscillator input |
| 핀 27 | X2 — Crystal oscillator output |
| 핀 28 | XT1 — 32 kHz crystal input |
| 핀 29 | XT2 — 32 kHz crystal output |
| 핀 30 | EXCLK — External clock input |
| 핀 31 | P20/TI00 — Port 20 / timer input 00 |
| 핀 32 | P21/TI01 — Port 21 / timer input 01 |
| 핀 33 | P22/TI10 — Port 22 / timer input 10 |
| 핀 34 | P23/TI11 — Port 23 / timer input 11 |
| 핀 35 | P24/TO00 — Port 24 / timer output 00 |
| 핀 36 | P25/TO01 — Port 25 / timer output 01 |
| 핀 37 | P26/TO02 — Port 26 / timer output 02 |
| 핀 38 | P27/TO03 — Port 27 / timer output 03 |
| 핀 39 | P30/INTP3 — Port 30 / interrupt 3 |
| 핀 40 | P31/INTP4 — Port 31 / interrupt 4 |
| 핀 41 | P32/INTP5 — Port 32 / interrupt 5 |
| 핀 42 | P33/TO30 — Port 33 / timer output 30 |
| 핀 43 | P34/TO31 — Port 34 / timer output 31 |
| 핀 44 | P35/TO32 — Port 35 / timer output 32 |
| 핀 45 | P36/TO33 — Port 36 / timer output 33 |
| 핀 46 | P17/ANI7 — Port 17 / ADC input 7 |
| 핀 47 | P16/ANI6 — Port 16 / ADC input 6 |
| 핀 48 | P15/ANI5 — Port 15 / ADC input 5 |
일반적인 애플리케이션
R5F100GEAFB#10 적합 용도: 7 애플리케이션s: Household Appliance Control (White Goods), Battery-Powered IoT Sensor Nodes, Smart Metering and Sub-Metering, HVAC Climate Control, Motor Control Front-End (BLDC Stepper), Industrial Sensor Hubs and PLC I/O, Consumer Electronics Remote Controls.
Household Appliance Control (White Goods)
The R5F100GEAFB#10's 64 KB code flash and IEC/UL 60730 hardware safety function make it ideal for controlling washing machines, dishwashers, microwave ovens, and induction cooktops. Its 230 nA STOP-mode current allows mains-powered boards to remain quiescent while waiting for keypad or sensor interrupts, and the 12-bit ADC directly reads temperature, water-level, and voltage-sense signals without external signal conditioning. Place decoupling within 3 mm of the VDD pins and use the E1 debug interface for in-field firmware updates during service.
추천
Battery-Powered IoT Sensor Nodes
The R5F100GEAFB#10's 66 uA/MHz active current and 230 nA STOP-mode standby make it well-suited for coin-cell-powered wireless sensor nodes measuring temperature, humidity, or motion. With SNOOZE-mode peripheral wake-up, the MCU can poll a sensor or UART without restarting the CPU, achieving sub-1 uA average current in duty-cycled applications. The 48-LFQFP footprint keeps the design compact, and 64 KB code flash accommodates over-the-air firmware-update bootstraps plus application logic.
추천
Smart Metering and Sub-Metering
Smart electricity, water, and gas meters use the R5F100GEAFB#10 for ADC-based measurement, RTC-driven tariff scheduling, and segmented LCD or LED display driving. The 4 KB data flash stores calibration coefficients and tampering event logs across long deployments, while the 32 MHz CPU executes metering algorithms at 0.1% accuracy. Hardware watchdog and IEC/UL 60730 safety functions support regulatory certification for utility-grade products.
추천
HVAC Climate Control
The R5F100GEAFB#10's 12-bit SAR ADC, 1.6 V to 5.5 V supply range, and wide operating temperature cover HVAC wall thermostats and air-handler controllers. Multiple serial-interface modules (CSI, UART, I2C) connect to temperature/humidity sensors, CO2 modules, and WiFi/BLE transceiver modules. STOP-mode current around 230 nA keeps the standby power budget under 30 mW, even at 230 V mains supply-side consumption budget.
추천
Motor Control Front-End (BLDC Stepper)
The R5F100GEAFB#10's hardware timers and PWM outputs suit low-power BLDC and stepper motor-control front-ends in fans, pumps, and small appliances. Programmable dead-time generators and high-speed timers provide deterministic commutation at 32 MHz, while the ADC samples back-EMF and current-sense signals with 12-bit resolution. Combined with a discrete gate-driver stage, this MCU achieves >90% efficiency at 200 W output levels.
추천
Industrial Sensor Hubs and PLC I/O
Industrial sensor hubs use the R5F100GEAFB#10 to aggregate analog/digital sensor data, run local decision logic, and forward results over UART/CSI links. The wide 1.6 V-5.5 V supply tolerates regulated 24 V industrial bus rails stepped down by small DC-DC converters, while the -40 C to +85 C operating temperature covers unheated factory cabinets. Hardware CRC and watchdog timer ensure reliable long-term unattended operation in PLC I/O modules.
추천
Consumer Electronics Remote Controls
The R5F100GEAFB#10 delivers ample 64 KB code flash for IR/RF-protocol stacks while its 230 nA STOP-mode current allows coin-cell-powered remote controls to last 5-7 years. On-chip 12-bit ADC supports capacitive-touch or resistive-button scanning without external components, and the 32 MHz CPU handles high-IR carrier modulation accurately. Programming via the E1 interface allows product differentiation by firmware without hardware changes.
추천
추천 제품 요약
엔지니어링 참조 데이터: R5F100GEAFB#10 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | R5F100GEAFB#V0 | R5F100GEAFB#50 | R5F100GEAFB#70 | R5F100GDAFB#V0 | PIC32MX270F512L-I/PF |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Microchip Technology |
| Package | 48-LFQFP (7x7 mm) | 48-LFQFP (7x7 mm) - same | 48-LFQFP (7x7 mm) - same | 48-LFQFP (7x7 mm) - same | 48-LFQFP (7x7 mm) - same | 48-TQFP-EP - same 48-pin footprint family |
| Core | RL78 16-bit | RL78 16-bit | RL78 16-bit | RL78 16-bit | RL78 16-bit | MIPS32 32-bit |
| Max CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 50 MHz |
| Code Flash | 64 KB | 64 KB | 64 KB | 64 KB | 48 KB (-25%) | 512 KB (+700%) |
| Data Flash | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | No separate data flash |
| Supply Voltage | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 1.6 V to 5.5 V | 2.3 V to 3.6 V |
| Active Current (typ.) | 66 uA/MHz | 66 uA/MHz | 66 uA/MHz | 66 uA/MHz | 66 uA/MHz | ~600 uA/MHz |
| A/D Converter | 10/12-bit SAR | 10/12-bit SAR | 10/12-bit SAR | 10/12-bit SAR | 10/12-bit SAR | 10-bit SAR |
주요 차별점
- Built-in IEC/UL 60730 hardware safety function (vs PIC32MX270F512L-I/PF (Microchip))
- 230 nA STOP-mode standby (vs PIC32MX270F512L-I/PF (Microchip))
- Wider supply voltage range (1.6 V to 5.5 V) (vs PIC32MX270F512L-I/PF (Microchip))
- On-chip 4 KB data flash for EEPROM emulation (vs R5F100GDAFB#V0 (lower-flash sibling))
설계 노트
Place a 0.1 uF X7R ceramic decoupling capacitor within 3 mm of each VDD pin and a bulk 1 uF capacitor on the same node. Add a ferrite bead in series with VDD for noisy 5 V supplies. The R5F100GEAFB#10 has a 5.5 V absolute maximum, so budget at least 10% margin below 5 V for hot-plug transients, especially in appliance mains environments with inductive kickback spikes.
While the 48-LFQFP has good thermal dissipation for a 64 KB flash MCU, the R5F100GEAFB#10 still draws up to 66 uA/MHz active current. Estimating: 32 MHz x 66 uA/MHz = 2.11 mA active power, which yields ~7 mW typical dissipation at 3.3 V. The 7x7 LFQFP thermal pad may be left unconnected for the LFQFP variant; consult the hardware manual before using it as a thermal pad.
Do not exceed 5.5 V on VDD under any load condition - transients from inductive loads and DC-DC switching supplies can damage the part. Ensure the E1/E2 debug interface signals TOOL0/TOOL1 are not driven by external sources during reset to avoid debug contention. Finally, when migrating firmware from R5F100GEAFB#V0 to #10, verify the watchdog timer interval configuration bits are matched.
Route the analog AVDD supply separately from noisy digital VDD with a ferrite bead or RC filter, even when both connect to the same source. Keep analog inputs (ANI0-ANI19) short and away from switching traces; use a ground-guard-pour to minimize digital coupling into ADC readings, especially for sensor measurements in metering and HVAC applications.
규정 준수 정보
Pb-free 48-LFQFP, RoHS and REACH compliant. IEC/UL 60730 hardware safety support per Renesas RL78/G13 family documentation. AEC-Q100 not applicable; this is a general-purpose industrial MCU.
