S9S12C32F1VFA1E - 16-Bit 32KB Flash MCU | NXP | Automotive
부품 번호: S9S12C32F1VFA1E ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
S9S12C32F1VFA1E 개요
A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, data memory, and peripherals that control embedded-system inputs and outputs. The S12C belongs to a 48-, 52-, or 80-pin flash-based MCU family and combines deterministic 16-bit processing with external communications, timing, and control functions. Its on-chip bandgap-based voltage regulator generates the internal digital VDD supply.
Key verified features include a 16-bit S12 core, 25 MHz maximum frequency, 32 KB flash, a 2.97 V to 5.5 V external supply range, and an integrated phase-lock loop circuit. These resources support embedded control loops that need more timing precision than an unsynchronized low-cost oscillator arrangement can provide. The automotive qualification and -40°C to +105°C temperature range distinguish it from typical consumer-temperature controls.
The device is positioned within NXP's broader embedded processing hierarchy: S12 core, S12C microcontroller family, flash-based MCU, embedded controller, and semiconductor. That hierarchy matters because replacement decisions depend on exact software compatibility, memory organization, peripheral mapping, clock behavior, package pins, and qualification—not merely CPU frequency. A substitute with the same nominal clock or memory size may still require firmware and PCB changes.
Typical uses include automotive body or network controllers, industrial automation modules, communication gateways, sensor-control systems, and compact embedded platforms. The PLL permits internal clock generation where the application requires derived clock domains, while the internal regulator separates the external operating supply from the internally regulated digital rail.
The most important design step is to use the official NXP datasheet and pin configuration rather than treating a generic S12C listing as a complete electrical contract. Verify supply pins, decoupling, clock setup, reset behavior, unused I/O, programming, and all peripheral multiplexing before layout release. Because the verified data does not provide current unit prices, stock, complete pin names, or a manufacturer PDF URL, those fields remain explicitly unresolved rather than inferred.
드롭인 대체품: S9S12C32F1VFA1E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: S9S12C32F1VFA1E (동일 폼 팩터 및 풋프린트) — 차이점: Package Code, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S12C32VFAE16
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.42 / 개
데이터시트 보기 →S9S12C32F1VFA1E 최대 정격 & 전기적 특성
| Product Type | 16-bit flash-based microcontroller |
| Processor Core | S12 |
| Maximum CPU Frequency | 25 MHz |
| Program Memory | 32 KB flash |
| External Supply Voltage Range | 2.97 V to 5.5 V |
| Internal Supply Architecture | On-chip bandgap-based voltage regulator (Vreg) |
| Clock Generation | Phase-lock loop (PLL) circuit |
| 동작 온도 범위 | -40°C to +105°C |
| Qualification | Automotive qualified |
| 패키지 | 48-pin QFP |
| Package Code | LQFP |
| Package Shape | Square |
| Lead Form | Gull wing |
| Terminal Count | 48 |
| Terminal Finish | Tin |
| 실장 유형 | Surface mount |
| RoHS 상태 | unknown |
| REACH Status | unknown |
S9S12C32F1VFA1E square 핀 구성 가이드
S9S12C32F1VFA1E(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S9S12C32F1VFA1E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S9S12C32F1VFA1E 적합 용도: 7 애플리케이션s: Automotive Network Controller, Industrial Sensor Controller, Communication Gateway, Body-Control Module, Motor and Actuator Control, Data Acquisition Controller, Legacy Equipment Retrofit.
Automotive Network Controller
The S9S12C32F1VFA1E fits an automotive network-control role where its 16-bit S12 core, 25 MHz operating point, 32 KB flash, and -40°C to +105°C rating align with general-purpose vehicle electronics. Its PLL can support derived internal timing, while the on-chip regulator generates the digital VDD rail from a 2.97 V to 5.5 V external supply. The principal engineering trade-off is lifecycle risk: NXP marks the device end of life, so production continuity, traceability, and long-term availability must be secured before committing new automotive volume.
추천
Industrial Sensor Controller
The S9S12C32F1VFA1E can serve as the control core in a compact industrial sensor module that combines timed acquisition, local decision logic, and communications. Its 25 MHz S12 core provides deterministic 16-bit processing, its 32 KB flash stores application code, and the PLL allows controlled clock generation when the system needs more than the base oscillator arrangement. The verified 2.97 V to 5.5 V external range is useful for industrial interface conditioning, but designers must verify every peripheral, ADC resource, timer channel, and pin from the official data sheet before selecting it.
추천
Communication Gateway
A communication gateway can use the S9S12C32F1VFA1E when its protocol stack fits within the available 32 KB flash and its timing requirements are supported by the 25 MHz S12 core. The integrated PLL may support a controlled internal clock domain, while the internal voltage regulator decouples processor supply behavior from the verified 2.97 V to 5.5 V external input. Because the supplied sources do not list UART, CAN, SPI, or other peripheral resources, engineers must inspect the exact data sheet before assigning network interfaces or making drop-in product decisions.
추천
Body-Control Module
The S9S12C32F1VFA1E is positioned for compact embedded body or network control because it combines a 16-bit processor, 32 KB flash, PLL, and automotive temperature capability. That combination can support deterministic state-machine logic and peripheral coordination in a fixed 48-pin QFP footprint. The design must still account for the end-of-life status, exact package pins, supply sequencing, reset behavior, I/O levels, and qualification requirements. Preserve the original firmware strategy and validate against NXP documentation before reusing the platform in a safety-relevant design.
추천
Motor and Actuator Control
The S9S12C32F1VFA1E may be evaluated for an actuator-control module when its timer architecture, I/O, and communication resources satisfy the exact motor-control requirements. Its 25 MHz 16-bit core supports faster arithmetic than many simpler 8-bit controls, and the PLL offers a route to controlled clock generation. However, the verified excerpt does not specify motor timers, PWM channels, analog functions, fault inputs, or output-drive ratings. Those resources must be confirmed in the official data sheet, followed by thermal, current, protection, and electromagnetic validation.
추천
Data Acquisition Controller
The S9S12C32F1VFA1E can form the local control section of a data-acquisition system when 32 KB of flash and a 25 MHz processing rate are sufficient. The 16-bit architecture helps with calculations, while the on-chip regulator and PLL organize internal power and timing. Yet the verified data does not identify ADC resolution, sample rate, conversion channels, comparator resources, or acquisition triggers. Those missing specifications prevent an application-specific recommendation; obtain the manufacturer data sheet and confirm signal conditioning, sampling timing, memory use, and interface requirements first.
추천
Legacy Equipment Retrofit
The S9S12C32F1VFA1E is most relevant when maintaining or reproducing legacy equipment that already depends on its S12 core, memory organization, clock configuration, and 48-pin board. Rebuilding from an existing design file can preserve firmware and peripheral assumptions more reliably than changing architecture. Before ordering replacements, compare the official pin table, errata, clock tree, reset configuration, and qualification details against the installed device. Procurement should also request traceability because the part is marked end of life and remaining inventory may be limited.
추천
추천 제품 요약
엔지니어링 참조 데이터: S9S12C32F1VFA1E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12C32VFAE16 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 48-pin QFP | 48-pin QFP family candidate; exact package verification required |
주요 차별점
- Verified automotive operating capability (vs MC9S12C32VFAE16)
- Documented clock and memory configuration (vs MC9S12C32VFAE16)
- Defined external power envelope (vs MC9S12C32VFAE16)
설계 노트
Design the supply network around the verified 2.97 V to 5.5 V external range and the internal bandgap-regulated VDD architecture. Use the official NXP data sheet for exact input, output, and decoupling requirements; do not infer capacitor values or regulator current limits from this search-result summary. Account for startup, reset current, I/O loading, and end-of-life sourcing constraints. If replacing the device, verify electrical tolerances and power sequencing rather than relying on the shared package name.
Preserve the verified 48-pin QFP land pattern only after checking the official package drawing for pin pitch, body dimensions, lead span, and exposed-pad status. Route the supply and ground connections according to the manufacturer recommendations, place required bypass capacitors at their specified pins, and keep sensitive timing and communication paths away from noisy switching nodes. The search results establish the terminal count but not individual pin functions, so no safe pinout-level routing prescription can be made from them.
Do not treat a related S12C or MC9S12 naming pattern as proof of a drop-in replacement. Compare package pin functions, memory maps, clock limits, peripheral assignments, reset behavior, timing definitions, electrical limits, qualification, and toolchain compatibility. The only candidate enumerated here lacks a verified manufacturer cross-reference and therefore represents a 70-percent compatibility hypothesis, not a qualified second source. Stock the original exact suffix or complete a full redesign qualification before removing the legacy device.
The integrated PLL can improve timing flexibility, but clock integrity still depends on correct decoupling, grounding, oscillator support components, and firmware configuration. Follow the official reference layout and external-component recommendations for the exact package. Validate startup, maximum-frequency operation, reset release, and peripheral timing on production hardware. Because no PLL multiplier range, jitter value, or loop bandwidth is present in the verified excerpt, do not calculate loop margins from inferred numbers.
규정 준수 정보
The verified result explicitly states automotive qualified and specifies a -40°C to +105°C operating range. No supplied source states RoHS, REACH, lead-free, halogen-free, conflict-minerals, or a specific AEC-Q100 qualification detail; AEC-Q100 is therefore recorded only at the broader automotive-qualified level supported by the result.
