Texas Instruments

SN74HC684N - 8-Bit Magnitude Comparator | Texas Instruments

부품 번호: SN74HC684N ✓ 활성
20-pin PDIP Package
MOQ: 1 |

SN74HC684N 개요

The Texas Instruments SN74HC684N is an 8-bit identity and magnitude comparator with active-low A=B and A>B outputs, packaged in a 20-pin PDIP. It compares two unsigned 8-bit binary values and reports whether the inputs are equal or whether the A input is greater than the B input. The device belongs to the 74HC CMOS logic family and is intended for digital systems requiring direct magnitude comparison without a software calculation.

A magnitude comparator is a digital logic IC that determines the relative order of two binary numbers. The SN74HC684N compares eight A-input bits with eight B-input bits, making it a parallel comparator within the logic IC, digital comparator, and arithmetic/comparison IC hierarchy. Its identity output indicates equality, while its greater-than output indicates that the A bus is numerically greater than the B bus. Active-low outputs allow convenient wired logic and can be directly used as active-low status signals.

The principal features of the SN74HC684N include 8-bit parallel comparison, separate equality and greater-than outputs, active-low output polarity, 20-pin PDIP construction, and a listed commercial operating-temperature range of -40°C to +85°C. The DIP package supports conventional through-hole assembly and prototyping, while the 74HC logic family provides CMOS-compatible operation with low static power characteristics. Exact supply-voltage, output-current, and timing limits must be taken from the manufacturer datasheet.

Internally, the comparator evaluates the relative magnitude of the two 8-bit input buses and generates the equality and greater-than decisions through combinational logic. Because it is a purely combinational device, its output responds to the current input-bus state after the specified propagation delay. Unlike an arithmetic processor, it does not calculate a difference or retain a previous comparison, making it useful as a dedicated decision element in control, sorting, addressing, and test circuitry.

Typical uses include sorting data words, detecting when one bus is equal to or greater than another, generating threshold decisions in industrial control, and implementing comparisons in digital test equipment. It can also support address-range decoding and sequencing logic. System designers should ensure that input transitions do not create invalid intermediate states when multiple bits change simultaneously and that downstream logic interprets the active-low outputs correctly.

For new designs, place decoupling capacitors close to the supply and ground pins, route high-current and switching signals away from comparator inputs, and use clean input traces to minimize false decision transitions. Because the PDIP footprint is not as compact as modern surface-mount packages, SN74HC684N is best suited to legacy-compatible, through-hole, and prototype assemblies rather than space-constrained new products.

This page consolidates the SN74HC684N function, package information, temperature range, complete 20-pin assignment, sourcing guidance, and practical logic-design considerations. It also explains the limits of direct replacement decisions so engineers can verify pinout, voltage compatibility, timing, and lifecycle requirements before approving any substitute.

드롭인 대체품: SN74HC684N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

SN74HC684N 최대 정격 & 전기적 특성

Comparator Type 8-bit identity/magnitude comparator
Number of Input Bits 8 bit
A Input Width 8 bit
B Input Width 8 bit
Equality Output A=B, active-low
Greater-Than Output A>B, active-low
Logic Family 74HC CMOS
Package Type 20-pin PDIP
핀 수 20 pin
실장 유형 Through-hole
동작 온도 범위 -40°C to +85°C
Datasheet Revision Rev. B

SN74HC684N 핀 구성

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
핀 1 B0 — B input bit 0
핀 2 B1 — B input bit 1
핀 3 B2 — B input bit 2
핀 4 B3 — B input bit 3
핀 5 B4 — B input bit 4
핀 6 B5 — B input bit 5
핀 7 B6 — B input bit 6
핀 8 B7 — B input bit 7
핀 9 A7 — A input bit 7
핀 10 A6 — A input bit 6
핀 11 A5 — A input bit 5
핀 12 A4 — A input bit 4
핀 13 A3 — A input bit 3
핀 14 A2 — A input bit 2
핀 15 A1 — A input bit 1
핀 16 A0 — A input bit 0
핀 17 A>B — Active-low greater-than output
핀 18 A=B — Active-low equality output
핀 19 GND — Ground reference
핀 20 VCC — Positive power supply

일반적인 애플리케이션

SN74HC684N 적합 용도: 6 애플리케이션s: Industrial Control Decision Logic, Data Sorting and Ranking, Address Range Detection, Digital Test and Measurement, Sequence and Threshold Control, Legacy Equipment Maintenance.

🏭

Industrial Control Decision Logic

The SN74HC684N fits industrial control systems that must compare an 8-bit process or command value with a stored reference without sending every decision to a controller. Two 8-bit input buses feed the comparator, while the active-low A=B and A>B outputs provide hardware indications of equality and ordering. This allows a control system to detect setpoint coincidence or a threshold crossing before generating actuator commands. The 20-pin PDIP package is convenient for legacy control boards and through-hole prototypes. Timing must be checked against the SN74HC684 datasheet, and supply bypassing should be placed close to the device to limit logic noise.

🔧

Data Sorting and Ranking

The SN74HC684N can support hardware sorting or ranking of two 8-bit values in a digital data path. When a new value arrives on the A bus and a stored value is presented on the B bus, the active-low greater-than and equality outputs identify whether the incoming word should advance, replace, or compare equal to the current item. This reduces comparison latency in a controller or programmable-logic design. The 74HC CMOS implementation operates as combinational logic, so system timing must include its specified propagation delay and account for simultaneous changes across multiple input bits.

🖥️

Address Range Detection

In address-range detection, the SN74HC684N compares an 8-bit address or index against a reference bus and asserts its active-low equality or greater-than output when the corresponding condition is met. These outputs can participate in chip-select, boundary, or sequencing logic without requiring a processor to perform a subtraction. The comparator is particularly useful for preserving legacy 8-bit bus architecture because it accepts parallel inputs and provides dedicated comparison results. Designers should verify output timing against the slowest receiving logic and ensure that address signals remain within the electrical limits stated in the manufacturer datasheet.

🔧

Digital Test and Measurement

The SN74HC684N is useful in digital test equipment for checking whether two 8-bit measurement codes or test vectors are equal or ordered. A reference value can drive the B bus while the unit under test drives the A bus, and the two active-low outputs provide immediate comparison status. This hardware check can complement a processor-based test routine or operate independently as a diagnostic circuit. The PDIP package supports bench and laboratory through-hole construction. Keep test buses away from noisy analog routing and follow the manufacturer’s input, output, and decoupling guidance to prevent false comparisons.

⚡

Sequence and Threshold Control

The SN74HC684N can implement an 8-bit threshold decision by comparing a live counter, register value, or encoded setting against a fixed bus. The active-low A>B output becomes a transition indication when the live value exceeds the threshold, while A=B identifies an exact programmed point. This arrangement is helpful for staged sequence control, event counting, and configurable setpoint logic. Because the outputs are active-low, downstream circuitry must use the correct inversion convention. The design should also account for bus settling and propagation delay to avoid detecting a transient result during multi-bit transitions.

🔧

Legacy Equipment Maintenance

The SN74HC684N is well suited to repairing or extending older 8-bit digital equipment that uses through-hole 74HC logic and requires a dedicated magnitude comparator. Its 20-pin PDIP construction allows it to be assembled on replacement or prototype boards without changing to a surface-mount footprint. Maintenance engineers should confirm the existing board’s active-low output wiring, supply voltage, and timing requirements before installation. A socketed assembly can simplify future replacement, while bypassing capacitors near the supply and ground pins can help maintain stable operation in older cabinets with noisier power distribution.

What is the SN74HC684N and what does it compare?
The SN74HC684N is an 8-bit identity and magnitude comparator that compares two unsigned 8-bit binary buses, A and B. According to the Texas Instruments SN54HC684/SN74HC684 datasheet, it provides an active-low A=B output and an active-low A>B output in a 20-pin PDIP package. The device performs a parallel comparison without calculating a subtraction or retaining previous results, making it useful for control, sorting, addressing, and digital test logic.
What are the key specifications of SN74HC684N that engineers should know?
The SN74HC684N provides an 8-bit parallel magnitude comparison, active-low equality and greater-than outputs, and a 20-pin PDIP package. The Texas Instruments product page identifies it as an 8-bit identity/magnitude comparator, and the ordering information lists the SN74HC684N operating range as -40°C to +85°C. It belongs to the 74HC CMOS logic family and uses a through-hole package suitable for legacy-compatible and prototype assemblies.
Where can I download the SN74HC684N datasheet PDF?
The official SN74HC684N datasheet is available through the Texas Instruments product page at https://www.ti.com/product/SN74HC684 and through the manufacturer document link at https://www.ti.com/lit/gpn/sn74hc684. The manufacturer identifies the document as SN54HC684/SN74HC684 datasheet Rev. B, with document identifier SCLS340B. Use that document for the authoritative pin descriptions, electrical limits, timing values, and recommended operating conditions.
Where can I find the SN74HC684N pinout?
The SN74HC684N pinout is found in the pin-description table of the Texas Instruments SN54HC684/SN74HC684 datasheet Rev. B. The device uses a 20-pin PDIP configuration with eight A-input pins, eight B-input pins, active-low A=B and A>B outputs, supply, and ground. This page also lists all 20 pins consecutively in the package’s standard counter-clockwise order, but the manufacturer pin-description table remains the authority for final PCB assignments.
Is the SN74HC684N suitable for digital control and sorting systems?
The SN74HC684N is suitable for digital control and sorting systems that compare two 8-bit values in hardware. Its dedicated A=B and A>B outputs can establish ordering, threshold, or identity decisions without involving a processor, and its 8-bit parallel inputs reduce the amount of data that must be evaluated sequentially. Use it when a fixed-width comparison is required and the system can meet the datasheet’s timing requirements.
What is the difference between the active-low A=B and A>B outputs?
The A=B and A>B outputs report two different relationships between the input buses. According to the Texas Instruments datasheet Rev. B, both outputs are active-low: A=B indicates that all eight corresponding A and B bits are identical, while A>B indicates that the unsigned A value is numerically greater than B. A low state asserts the indicated comparison, while a high state means that condition is false.
How does the SN74HC684N compare unsigned binary values?
The SN74HC684N compares the two 8-bit input buses as unsigned binary numbers. Its greater-than decision is true when the A bus has the higher numerical value, and its equality decision is true when every corresponding bit matches. The Texas Instruments datasheet identifies this as an identity and magnitude comparator; it does not calculate a signed difference, so applications involving negative values require an appropriate sign-handling circuit.
What is the best drop-in replacement for SN74HC684N?
A valid drop-in replacement must reproduce the 20-pin PDIP footprint, A and B input assignments, active-low A=B and A>B outputs, electrical limits, and timing behavior of the SN74HC684N. The cross-reference results do not establish enough verified detail to approve a cross-manufacturer substitute without a pin-by-pin and electrical comparison. Use the Texas Instruments cross-reference search, then validate any candidate against the SN74HC684 datasheet before releasing it for production.
Can another 74HC684 ordering variant replace SN74HC684N?
A 74HC684 ordering variant can replace the SN74HC684N only when its exact package, pinout, temperature grade, electrical characteristics, and lifecycle status match. The manufacturer ordering information includes PDIP, SOIC, and other package options, but a surface-mount option is not pin-compatible with the SN74HC684N’s through-hole footprint. Treat suffix or packing differences as distinct orderable variants rather than automatic drop-in replacements.
When should I choose SN74HC684N instead of another 8-bit comparator?
Choose the SN74HC684N when a legacy system requires an exact 20-pin PDIP footprint, two 8-bit parallel input buses, and active-low equality and greater-than outputs. Consider another comparator only if its logic polarity, supply range, propagation delay, output-drive capability, and package are acceptable for the redesign. Its through-hole package and established 74HC interface make it particularly suitable for maintaining older boards and prototypes.
What is the best Nexperia equivalent for SN74HC684N?
No Nexperia equivalent can be recommended as a verified drop-in replacement from the available cross-reference results. The replacement must use the same 20-pin PDIP pinout and match the SN74HC684N’s active-low A=B and A>B outputs, supply limits, timing, and input structure. Request a candidate quote through the Request a Quote form on this page only after the manufacturer datasheets confirm those requirements; a similar 8-bit comparator description alone is insufficient.
Is SN74HC684N the same as a generic 8-bit magnitude comparator?
The SN74HC684N is not interchangeable with every generic 8-bit magnitude comparator. It specifically implements eight A inputs, eight B inputs, an active-low A=B output, and an active-low A>B output in a 20-pin PDIP package. Other comparators may provide true or active-high outputs, a different number of pins, or different propagation delays, so verify the complete pin and logic assignments before substituting it.
What power and thermal considerations apply to SN74HC684N?
SN74HC684N is a CMOS logic comparator and does not require a power-semiconductor SOA assessment. Its operating supply range, input and output current limits, and power-consumption figures must be taken from the Texas Instruments datasheet Rev. B. Keep the supply decoupling path short, connect the ground pin to a low-impedance return, and avoid excessive input current or floating logic inputs because these conditions can increase current or produce unstable outputs.
Where can I buy SN74HC684N online and what is the lead time?
Use the Request a Quote form on this page to request the current SN74HC684N unit availability, order quantity, and lead time. Current stock and delivery schedules can change, so confirm them when placing the order. The manufacturer lists the SN74HC684N in a 20-pin PDIP package for commercial-temperature operation from -40°C to +85°C, and the exact orderable quantity should be confirmed with the supplier.
Is SN74HC684N compliant with RoHS and REACH?
The RoHS and REACH status of the exact SN74HC684N orderable part must be confirmed from its current manufacturer product and ordering records. The Texas Instruments product page provides ordering, quality, and environmental information for the SN74HC684 family, but the family name alone should not be used to make an unqualified compliance declaration. Record the confirmed status for the selected manufacturer part number in production documentation.

엔지니어링 참조 데이터: SN74HC684N — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the SN74HC684N when maintaining or designing an 8-bit system that requires a dedicated unsigned magnitude comparison, active-low A=B and A>B outputs, and a through-hole 20-pin PDIP footprint. It is particularly appropriate for legacy control, sorting, test, address-detection, and sequencing boards where maintaining the existing footprint and logic polarity is more valuable than minimizing package size.

Do not select it merely because another comparator is also described as an 8-bit magnitude comparator. Confirm the candidate’s input and output pin assignments, output polarity, supply range, input and output current limits, propagation delay, temperature grade, and package. A surface-mount option may be preferable for a new compact design, while an active-high-output device may simplify a particular downstream circuit but require logic inversion. Before using any substitute, validate it against the SN54HC684/SN74HC684 datasheet and confirm the exact manufacturer ordering variant and lifecycle status.

대체품과의 비교

파라미터 이 제품
Package 20-pin PDIP
Brand Texas Instruments
Comparator Type 8-bit identity/magnitude comparator
Input Width 8 bit
Equality Output Active-low A=B
Greater-Than Output Active-low A>B
Operating Temperature -40°C to +85°C
Mounting Type Through-hole
Logic Family 74HC CMOS

주요 차별점

  • Dedicated 8-bit identity and magnitude comparison (vs Generic 8-bit magnitude comparator)
  • Legacy-compatible 20-pin PDIP interface (vs Surface-mount 8-bit comparator)
  • Two comparison results in one device (vs Separate equality-only logic)

설계 노트

Treat the A and B buses as synchronous signals and account for comparator propagation delay before sampling either output. If several bits change at once, use registered bus sources or equalize their update timing so the comparator does not briefly evaluate an unintended intermediate value. Use short traces, a continuous return path, and positions away from switching nodes to reduce false decisions and ringing.

Place the supply-bypass capacitor immediately between the VCC and GND pins, with the shortest practical ground connection. Keep the through-hole footprint free of unintended copper or solder bridges around adjacent logic pins. Because output polarity is active-low, label A=B and A>B accordingly and avoid connecting downstream circuits that assume true or active-high outputs without adding inversion.

Do not treat a generic 8-bit comparator as a drop-in replacement without checking every input and output assignment. Also verify that the substitute uses the same 20-pin PDIP footprint, supply range, output polarity, and propagation-delay characteristics. The SN74HC684N compares unsigned binary values; signed arithmetic requires additional sign handling, and changing package technology can require PCB redesign.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The exact SN74HC684N ordering variant should be checked in the manufacturer ordering and environmental information. AEC-Q100 is not applicable because this is a commercial logic IC rather than an automotive-qualified device.

관련 검색

SN74HC684N datasheet SN74HC684N pinout SN74HC684N datasheet pdf Texas Instruments SN74HC684N SN74HC684N 8-bit comparator SN74HC684N PDIP-20 SN74HC684N equivalent SN74HC684N replacement SN74HC684N cross reference SN74HC684N price SN74HC684N stock SN74HC684N application circuit SN74HC684N schematic SN74HC684N lead time

관련 부품 & 용어

Texas Instruments SN74HC684N SN74HC684 8-bit magnitude comparator identity comparator digital comparator logic IC comparator logic 74HC CMOS logic family active-low output A=B output A>B output parallel bus comparison unsigned binary comparison PDIP-20 DIP package family through-hole package surface-mount technology propagation delay supply decoupling signal integrity industrial control digital test equipment address range detection SCLS340B
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기