STM32G431K6U3 - 170MHz Cortex-M4F MCU, 32KB | STMicroelectronics
부품 번호: STM32G431K6U3 ✓ 활성STM32G431K6U3 개요
A general-purpose microcontroller is a programmable semiconductor that executes firmware, controls peripherals, and exchanges data with sensors, actuators, and communications equipment. The STM32G4 family belongs to the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M4F core, and embedded-control semiconductor. STM32G431K6U3 is particularly suited to systems requiring deterministic control, fast analog conversion, and communication functions in a space-constrained design.
Key features include a 170 MHz Arm Cortex-M4F processor with floating-point capability, 32 KB of Flash program memory, 26 I/O pins, and an integrated math accelerator. Its connected peripherals include CANbus, I2C, SPI, UART/USART, and other serial interfaces, while its analog resources include medium-resolution ADCs, operational amplifiers, comparators, and DAC functions. These resources allow a compact controller to supervise power conversion, acquire sensor data, and communicate with external equipment without requiring several separate devices.
The Cortex-M4F architecture uses a 32-bit RISC instruction set and includes single-precision floating-point instructions for control calculations. The STM32G431K6U3 also supports programmable timer resources for motor control, digital power conversion, and periodic signal generation. Brown-out detection and reset, DMA, programmable power and timing behavior, and direct-memory-access peripherals help separate data-transfer tasks from the CPU core.
Typical applications include digital power supplies and motor controllers, where PWM generation, fast analog feedback, and communication interfaces are valuable. The device can also serve in industrial sensor hubs, data-acquisition modules, compact industrial control panels, and communication equipment requiring CANbus, SPI, or UART connectivity. Its 32-pin package reduces board area while preserving a broad selection of general-purpose interfaces.
PCB design should preserve access to every UFQFPN lead, provide a stable local supply and ground distribution, and route analog inputs away from fast switching and high-current paths. Check the manufacturer pin-description and land-pattern tables before assigning signals, and use the recommended decoupling arrangement for reliable operation.
This page combines device specifications, application guidance, package information, and same-package alternatives to support faster engineering evaluation. Because flash capacity and package dimensions can change the most appropriate replacement, verify firmware size, peripheral requirements, and pin assignments before approving any substitution.
드롭인 대체품: STM32G431K6U3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32G431K6U3 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Math Accelerator, Mounting Type, Core, Flash Memory.
STM32G431K6T6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32G431K8T6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32G431K8T3
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32G431KBT6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32G431K6U3 최대 정격 & 전기적 특성
| Product Type | 32-bit Arm Cortex-M4F microcontroller |
| Maximum CPU Frequency | 170 MHz |
| Core Architecture | Arm Cortex-M4F with floating-point instructions |
| Instruction Set Width | 32-bit RISC |
| Program Memory Size | 32 KB Flash |
| Flash Organization | 32K × 8 bits |
| Number of I/O Pins | 26 pins |
| 패키지 | 32-pin UFQFPN, 5 mm × 5 mm |
| 실장 유형 | Surface mount |
| Serial Interfaces | CANbus, I2C, SPI, UART/USART |
| Math Accelerator | Integrated hardware math accelerator |
| Data Transfer | DMA-supported peripherals |
| System Protection | Brown-out detection and reset |
STM32G431K6U3 32-pin ufqfpn, 5 mm × 5 mm 핀 구성 가이드
STM32G431K6U3(32-pin ufqfpn, 5 mm × 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32G431K6U3.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32G431K6U3 적합 용도: 6 애플리케이션s: Digital Power Converters, BLDC and PMSM Motor Control, Industrial Sensor Hubs, Data Acquisition Modules, CAN-Connected Equipment, Programmable Logic and Timing.
Digital Power Converters
The STM32G431K6U3 suits digitally controlled power converters because its 170 MHz Cortex-M4F core can execute compensation calculations while advanced timers generate precision PWM drive signals. Integrated analog resources support feedback acquisition, and UART, SPI, or CANbus can connect the converter to a supervisory controller. A 32-pin UFQFPN footprint also reduces board area compared with larger leaded packages. Confirm the ADC performance, PWM timing, operating voltage, and current-sense limits in the manufacturer specifications before finalizing the control loop.
추천
BLDC and PMSM Motor Control
The STM32G431K6U3 is appropriate for compact BLDC and PMSM motor controllers requiring deterministic real-time execution at 170 MHz. Its timer architecture supports PWM generation, while analog inputs can support current sensing and position feedback. Communication interfaces provide paths to encoders, sensors, and industrial controllers. The 26 available I/O pins help limit external glue logic. Firmware and external gate-driver selection must be matched to the motor voltage, current, and required switching sequence.
추천
Industrial Sensor Hubs
A sensor hub built around the STM32G431K6U3 can acquire and process measurements while consolidating communications on a compact board. The 170 MHz Cortex-M4F core handles protocol processing and control logic, while I2C and SPI suit sensors and storage devices; UART, USART, and CANbus support wider system connectivity. With 32 KB of Flash, the device is best for focused firmware rather than large buffering. Use DMA for throughput-sensitive transfers and isolate analog sensor routes from switching nodes.
추천
Data Acquisition Modules
The STM32G431K6U3 can serve as the control processor in a compact data-acquisition module where fast control, analog measurement, and serial transfer must coexist. Its 170 MHz core supports buffering and signal processing, and integrated ADC, timer, and DMA resources reduce component count. SPI and UART provide straightforward links to data converters or host processors. Engineer the analog front end and reference circuitry independently of the MCU, and verify acquisition bandwidth and input limits from the electrical documentation.
추천
CAN-Connected Equipment
The STM32G431K6U3 fits CAN-connected industrial equipment that needs local control plus network communication. CANbus provides a dedicated path for distributed commands and diagnostics, while I2C, SPI, UART, and USART cover sensors, actuators, and service interfaces. The 170 MHz core can run control algorithms and communications concurrently, with DMA assisting data movement. Design the transceiver and bus protection separately, and validate termination, timing, and protocol-stack behavior on the target network.
추천
Programmable Logic and Timing
The STM32G431K6U3 can implement programmable timing, sequencing, and monitoring functions where deterministic firmware control is preferable to fixed logic. Timers generate precise periodic events and PWM waveforms, while communications allow configuration and diagnostic access. Its floating-point Cortex-M4F core supports calculations that would otherwise require external logic or a higher-cost processor. Validate timer clock accuracy, minimum pulse widths, I/O speed, and interrupt latency before using it as a precision timing source.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32G431K6U3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32G431K6T6 | STM32G431K8T6 | STM32G431K8T3 | STM32G431KBT6 |
|---|---|---|---|---|---|
| Package | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) | 32-pin UFQFPN (5x5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F | Arm Cortex-M4F |
| Maximum CPU Frequency | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 64 KB | 128 KB |
주요 차별점
- Higher-flash alternatives can expand firmware headroom (vs STM32G431KBT6)
- Mid-density option balances memory and package reuse (vs STM32G431K8T6)
- Direct family alternative for identical memory capacity (vs STM32G431K6T6)
설계 노트
Route the UFQFPN exposed pad as a thermal and ground structure according to the manufacturer land-pattern guidance. Do not treat the exposed pad as an interchangeable signal pin. Place the device-side input, output, and decoupling capacitors close to their corresponding pins, and keep sensitive analog traces away from PWM, gate-drive, and high-current return paths. A short ground connection beneath the device helps control return current and reduce analog coupling.
Plan the supply rails and decoupling around the STM32G431K6U3's internal power domains. Check the manufacturer table for operating-voltage limits, regulator configurations, startup behavior, and current consumption before connecting external analog or communications circuits. Place bulk energy storage near the power entry point and local ceramic capacitance near the MCU supply pins. Sequence any externally powered communications transceiver if the MCU and transceiver rails have different startup thresholds.
Do not approve a related STM32G431 order code solely because the package drawing matches. Confirm the exact pin-description table, Flash density, temperature marking, ordering suffix, and exposed-pad requirement. The listed alternatives retain the 170 MHz Cortex-M4F architecture but can provide 32, 64, or 128 KB of Flash. Review boot-sector layout, linker settings, firmware size, and any vendor-supported device identifiers before modifying an existing design.
Separate analog and digital return currents carefully in mixed-signal control boards. Keep ADC inputs short, use a quiet analog ground strategy where appropriate, and avoid routing sensitive inputs beneath digital clocks or PWM nets. For communications lines, follow the transceiver recommendations and provide the required termination, protection, and common-mode accommodation. Validate the finished layout with signal-integrity and EMC testing because the MCU package alone does not determine analog accuracy or bus robustness.
규정 준수 정보
Material-compliance and automotive-qualification declarations must be confirmed for the exact STM32G431K6U3 order code.
