TMS320F280034-Q1 - Automotive C2000 MCU 120MHz | TI
부품 번호: TMS320F280034-Q1 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.75 | $6.75 |
| 10 | $6.1 | $61.00 |
| 100 | $5.2 | $520.00 |
| 500 | $4.8 | $2,400.00 |
| 1,000 | $4.35 | $4,350.00 |
TMS320F280034-Q1 개요
A real-time microcontroller (MCU) is a specialized processing unit optimized for deterministic, low-latency control of electrical and electromechanical systems. The C2000 family extends the traditional MCU concept by integrating a digital signal processor (DSP) architecture with control peripherals such as high-resolution PWM, ADCs, and communication interfaces. This allows the MCU to execute complex control algorithms in a single clock cycle, enabling faster loop rates and higher power density in converters and inverters. C2000 devices are widely used in motor drives, EV powertrain, renewable energy systems, and digital power supplies where predictable timing is critical.
Key features of the TMS320F280034-Q1 include a 120-MHz C28x CPU with floating-point unit (FPU), trigonometric math unit (TMU), control law accelerator (CLA), 128-KB flash, hardware AES acceleration, and CAN-FD. The device includes a CRC engine and multiple timers, and supports a 3.3-V supply. The automotive qualification ensures operation over the extended temperature range and compliance with AEC-Q100 requirements.
The architecture of the C2000 MCU is centered on the C28x DSP core, which combines the math capabilities of a DSP with the peripheral set of an MCU. The FPU accelerates floating-point control algorithms, while the TMU accelerates trigonometric operations used in motor control. The CLA is an independent coprocessor that can execute real-time control tasks in parallel, offloading the main CPU. The AES module provides hardware-accelerated security, and CAN-FD supports higher bandwidth automotive networking.
Typical applications include electric vehicle traction inverters, industrial motor drives, digital power supplies, and solar inverters. The high switching frequency support and low-latency control loop make this MCU suitable for GaN and SiC power stages, where fast response is essential for efficiency and reliability.
Designers should note that precise supply decoupling and a clean ground plane are critical for reliable ADC operation and deterministic performance. Refer to the TI TMS320F28003x datasheet and application notes for recommended PCB layout, PLL configuration, and flash wait-state setup.
드롭인 대체품: TMS320F280034-Q1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TMS320F280034-Q1 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, Automotive Grade, Automotive Qualification, Automotive Qualified.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
TMS320F280033-Q1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TMS320F280032-Q1
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TMS320F280023-Q1
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →TMS320F280021-Q1
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →TMS320F280034
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TMS320F280034-Q1 최대 정격 & 전기적 특성
| Core Architecture | C2000 C28x 32-bit DSP/MCU |
| CPU Speed | 120 MHz |
| Flash Memory | 128 KB |
| Floating-Point Unit (FPU) | Yes |
| Trigonometric Math Unit (TMU) | Yes |
| Control Law Accelerator (CLA) | Yes |
| AES Encryption | Yes |
| CAN-FD | Yes |
| Automotive Qualification | AEC-Q100 (Qualified) |
| Package Type | LQFP-48 (PT) |
| 실장 유형 | Surface Mount |
| 핀 수 | 48 |
| RoHS 상태 | Unknown |
TMS320F280034-Q1 lqfp-48 (pt) 핀 구성 가이드
TMS320F280034-Q1(lqfp-48 (pt) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: TMS320F280034-Q1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TMS320F280034-Q1 적합 용도: 6 애플리케이션s: Electric Vehicle Traction Inverter, Industrial Motor Drive, Digital Power Supply, Robotic Servo Control, Solar Power Converter, Automotive Body Electronics.
Electric Vehicle Traction Inverter
The TMS320F280034-Q1 is ideal for EV traction inverters because its 120-MHz C28x core, FPU, and TMU accelerate field-oriented control algorithms, while the CLA runs parallel control loops. The CAN-FD interface supports high-speed communication with the vehicle network, and AEC-Q100 qualification ensures reliability under harsh automotive conditions. When paired with a GaN or SiC power stage, the MCU enables high switching frequencies and higher power density, improving inverter efficiency.
추천
Industrial Motor Drive
For industrial motor drives, the TMS320F280034-Q1 provides the computational headroom for sensorless FOC and servo control. Its 128-KB flash stores complex control firmware, while the FPU and CLA execute current loop and speed loop tasks with low latency. The device's PWM and ADC features support precise voltage and current measurement, enabling smooth torque control. The LQFP-48 package fits compact drive electronics, and the CAN-FD interface connects to industrial fieldbus networks.
추천
Digital Power Supply
The TMS320F280034-Q1 is well suited for digital power supplies requiring fast loop response and high resolution. The 120-MHz CPU with FPU and TMU can execute complex compensator algorithms, while the CLA offloads high-frequency control tasks. The device supports multiple PWM outputs with dead-band control, enabling topologies like LLC, phase-shifted full-bridge, and synchronous buck. With hardware AES and CAN-FD, it also enables secure telemetry and grid communication in smart power systems.
추천
Robotic Servo Control
Robotic arms and collaborative robots require precise, low-latency motor control. The TMS320F280034-Q1's combination of FPU and TMU accelerates trigonometric calculations for kinematics, while the CLA independently handles current/torque loops. The device's small LQFP-48 footprint is ideal for space-constrained servo drives. CAN-FD enables synchronized communication across multiple joints, and the wide temperature capability supports industrial robot environments.
추천
Solar Power Converter
In solar inverters and MPPT controllers, the TMS320F280034-Q1 enables efficient power conversion with its fast control loop and high-resolution PWM. The C28x DSP core executes MPPT algorithms and grid synchronization with minimal latency, while the CLA handles fast voltage/current regulation. The device's CAN-FD port supports communication with energy management systems, and its automotive-grade reliability extends to outdoor solar installations. The FPU simplifies floating-point control code development.
추천
Automotive Body Electronics
The TMS320F280034-Q1 can serve in automotive body control modules, lighting control, and motorized actuators. Its CAN-FD interface connects to the vehicle network, while AES encryption secures data communications. The 128-KB flash is sufficient for body control firmware, and the LQFP-48 package fits into compact ECU designs. AEC-Q100 qualification ensures operation across the full automotive temperature range, making this MCU a robust choice for modern vehicles.
추천
추천 제품 요약
엔지니어링 참조 데이터: TMS320F280034-Q1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | TMS320F280033-Q1 | TMS320F280032-Q1 | TMS320F280023-Q1 | TMS320F280021-Q1 | TMS320F280034 |
|---|---|---|---|---|---|---|
| Package | LQFP-48 (PT) | LQFP-48 (PT) | LQFP-48 (PT) | LQFP-48 (PT) | LQFP-48 (PT) | LQFP-48 (PT) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Automotive Grade (AEC-Q100) | Qualified | Qualified | Qualified | Qualified | Qualified | Not Qualified |
주요 차별점
- Automotive AEC-Q100 qualification (vs TMS320F280034 (non-Q1))
- 128 KB flash with FPU/TMU/CLA (vs TMS320F280032-Q1)
- Hardware AES and CAN-FD (vs TMS320F280023-Q1)
설계 노트
For reliable operation of the TMS320F280034-Q1, decouple each VDD and VDDIO pin with 100nF ceramic capacitors placed as close to the pins as possible, and a bulk 4.7uF capacitor near the power entry. The MCU has separate analog and digital power supplies, so use ferrite beads between them to reduce noise coupling. Provide a clean 3.3V rail and maintain power-up sequencing per the datasheet.
Route the ADC input traces with ground guarding and keep them away from switching nodes to minimize noise. The oscillator and PLL pins need a dedicated ground area and short traces. For the LQFP-48 package, use a solid ground pour on the bottom layer to enhance thermal dissipation and reduce inductance. Follow the TI recommended layout guidelines in the TMS320F28003x datasheet.
Do not leave boot configuration pins floating, as this may cause unexpected boot behavior. Configure the TRST pin appropriately to avoid unintentional test mode. Ensure flash wait states are set for 120MHz operation; otherwise, incorrect flash reads can occur. Refer to the TMS320F28003x datasheet for the recommended flash wait-state and PLL configuration values.
규정 준수 정보
Automotive AEC-Q100 qualification is confirmed from TI product description. Other compliance data is not provided in the verified web data and is marked unknown.
