AMD

XC6SLX25T-2FGG484I - 24K LEXT Spartan-6 FPGA | AMD

부품 번호: XC6SLX25T-2FGG484I ✓ 활성
1.14 V to 1.26 V Vdss 484-BBGA, 15 mm × 15 mm, 0.80 mm pitch Package 500 MHz Speed 936 kbit Memory
MOQ: 1 |

XC6SLX25T-2FGG484I 개요

The AMD XC6SLX25T-2FGG484I is a Spartan-6 LXT field-programmable gate array with 24,051 logic elements, 250 I/O, and a 484-BBGA package. It operates from a 1.14 V to 1.26 V supply range, uses 45 nm CMOS technology, and is specified for an internal frequency of 500 MHz. The -2 speed grade and industrial temperature designation place it between the higher-performance -3 grade and lower-performance -1 grade for applications that require a balance of performance, operating range, and logic density.

A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal processing can be configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, where it combines configurable logic blocks, programmable I/O, embedded memory, clocking resources, and dedicated hard processors or blocks. The Spartan-6 LXT family extends the Spartan-6 architecture with logic optimized for demanding embedded signal-processing and control systems rather than only general-purpose glue logic.

The XC6SLX25T provides 24,051 logic elements, 3,758 adaptive logic modules, and 936 kbit of embedded memory according to the manufacturer comparison data. Its 250 I/O provide substantial connectivity for parallel buses, control signals, serial interfaces, and external memory. A 500 MHz internal-frequency figure supports demanding clocked logic, while the 45 nm CMOS implementation and 1.2 V nominal core supply fit established low-voltage digital design practices.

The FGG484 package is a lead-free 15 mm by 15 mm ball-grid array with a 0.80 mm pitch. Its high pin count allows the device to expose more programmable I/O than smaller Spartan-6 packages. The package also imposes demanding assembly requirements because fine-pitch balls require a qualified BGA process, suitable PCB land pattern, and careful control of thermal and soldering conditions during assembly.

Typical uses include industrial control, data acquisition, communications equipment, embedded processing, test and measurement, and high-density programmable logic. The LXT feature mix and 24,051 logic elements make the device suitable when a design needs substantially more parallel I/O and logic capacity than a small control FPGA while retaining a 45 nm Spartan-6 footprint and architecture.

A critical design consideration is thermal management: the 1.2 V core supply and dense BGA package require a PCB construction that can remove heat from the device. Because the available material does not provide detailed power, thermal-resistance, or absolute-maximum ratings, those values should be taken directly from the manufacturer Spartan-6 documentation before finalizing the power tree and board stack-up.

This page combines the exact ordering information, electrical identifiers, package characteristics, engineering applications, and same-package replacement considerations needed to qualify the XC6SLX25T-2FGG484I for a new programmable-logic design.

드롭인 대체품: XC6SLX25T-2FGG484I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC6SLX25T-2FGG484I (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Package, User I/O, Operating Temperature, Package Type.

AMD
Device Type: FPGA
Operating Temperature: 0°C to 85°C
Package Type: Lead-free 484-BBGA
비교 대상: XC6SLX25T-2FGG484I →
AMD
Package: 484-BBGA (23x23 mm, 1 mm pitch)
User I/O: 266
Operating Temperature: -40°C to +100°C
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: Spartan-6 LX Field Programmable Gate Array (FPGA)
Package: 484-pin FBGA
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: Spartan-6 LX Field Programmable Gate Array
Package: 484-pin FCBGA
Operating Temperature: 0 C to +85 C
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: Field Programmable Gate Array (FPGA)
Package: 484-pin FBGA
Operating Temperature: 0 C to +85 C
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: Field-Programmable Gate Array (FPGA)
Package: 484-ball FBGA
User I/O: Up to 250 I/O
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: Field-Programmable Gate Array (FPGA)
User I/O: 250 I/Os
Operating Temperature: 0°C to 85°C
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: FPGA
Package Type: Lead-free FBGA, MO-275 / CSBGA-324
비교 대상: XC6SLX25T-2FGG484I →
AMD
Device Type: Field Programmable Gate Array (FPGA)
Package: 484-pin FBGA, 23 mm × 23 mm
User I/O: 250 pins
비교 대상: XC6SLX25T-2FGG484I →
Xilinx
Device Type: Spartan-6 LXT Field Programmable Gate Array (FPGA)
Operating Temperature: 0°C to 85°C
Package Type: 484-FBGA
비교 대상: XC6SLX25T-2FGG484I →

XC6SLX25T-2FGG484C

✅ 드롭인
AMD
📦 484-BBGA (FGG484)
Field-Programmable Gate Array (FPGA) · Spartan-6 LXT · 24,051 cells · 1,879 CLBs · 958,464 bits · 250 I/Os · 500 MHz · -2

가격 문의

데이터시트 보기 →

XC6SLX25T-3FGG484I

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 484-BBGA (FGG484)
Field Programmable Gate Array (FPGA) · Spartan-6 LXT · 24,051 cells · 1,879 CLBs · 958,464 bits · 250 pins · 266 pins · 500 MHz

가격 문의

데이터시트 보기 →

XC6SLX25T-1FGG484I

✅ 드롭인 ⚠️ 사양 미검증
📦 484-BBGA (FGG484)
Same LXT family, FGG484 package, and industrial temperature designation; -1 speed grade is lower performance than the -2 grade

📋 참조 대체품 (카탈로그에 없음)

XC6SLX25-2FGG484I

✅ 드롭인
AMD
📦 484-BBGA (FGG484)
Spartan-6 LX · 24051 · 958464 bits · 52 · 266 · 484-BBGA (23x23 mm, 1 mm pitch) · 1.2 V · 500 MHz

가격 문의

데이터시트 보기 →

XC6SLX25T-2FGG484C

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 484-BBGA (FGG484)
Field-Programmable Gate Array (FPGA) · Spartan-6 LXT · 24,051 cells · 1,879 CLBs · 958,464 bits · 250 I/Os · 500 MHz · -2

가격 문의

데이터시트 보기 →

XC6SLX25T-2FGG484I 최대 정격 & 전기적 특성

Device Type Spartan-6 LXT field-programmable gate array
Logic Elements 24,051 LE
Adaptive Logic Modules 3,758 ALM
Embedded Memory 936 kbit
User I/O 250 I/O
Internal Frequency 500 MHz
Process Technology 45 nm CMOS
Core Supply Voltage 1.14 V to 1.26 V
Nominal Supply Voltage 1.2 V
Speed Grade -2
동작 온도 0 °C to 85 °C
패키지 484-BBGA, 15 mm × 15 mm, 0.80 mm pitch
Package Lead Finish Lead-free
Package Side Top-side BGA
Moisture Sensitivity Level MSL 3, 168 hours
Device Family Spartan-6 LXT
실장 유형 Surface mount

XC6SLX25T-2FGG484I top-side bga 핀 구성 가이드

XC6SLX25T-2FGG484I(top-side bga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC6SLX25T-2FGG484I의 top-side bga 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC6SLX25T-2FGG484I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC6SLX25T-2FGG484I 적합 용도: 6 애플리케이션s: Industrial PLC and Automation Control, Data Acquisition and Signal Processing, Communications and Network Interface, Test and Measurement Instrumentation, Embedded Video and Image Processing, Aerospace and Defense Control Systems.

🏭

Industrial PLC and Automation Control

The XC6SLX25T-2FGG484I fits industrial control equipment that needs deterministic programmable logic, numerous field-bus signals, and a 0 °C to 85 °C operating range. Its 24,051 logic elements and 3,758 adaptive logic modules can implement sequencing, interlocks, counters, protocol state machines, and control logic in parallel, while 250 I/O provide substantial connectivity for sensors and actuators. The device can sit between a supervisory processor and external transceivers, performing timing-critical signal conditioning and protocol conversion. The 45 nm Spartan-6 LXT architecture also supports established clocking and memory resources needed for deterministic control. Design validation should include power estimation, signal-integrity review for the 0.80 mm-pitch BGA, and timing closure under the expected clock and I/O conditions.

📊

Data Acquisition and Signal Processing

The XC6SLX25T-2FGG484I is appropriate for parallel data acquisition, filtering, and real-time signal conditioning because it combines 24,051 logic elements with 936 kbit of embedded memory and 250 I/O. Parallel converter outputs can be captured, aligned, filtered, and routed through programmable pipelines, reducing the processing burden on an external processor. The listed 500 MHz internal-frequency rating provides a strong basis for clocked logic, although actual throughput must be established through timing analysis. The large I/O count is especially useful when multiple converters, digital sensors, or framing devices must be supported simultaneously. Engineers should budget acquisition timing uncertainty, implement clocks according to the manufacturer guidance, and confirm that the selected I/O standards provide adequate noise margin for the target signal amplitudes.

🌐

Communications and Network Interface

The XC6SLX25T-2FGG484I can implement communication line-rate interfaces, packet framing, buffering, and protocol bridging in equipment with modest external processors. Its 3,758 adaptive logic modules are useful for parallel-to-serial conversion, clock-domain crossing, state machines, and backpressure handling, while 936 kbit of embedded memory supports finite buffering. With 250 I/O, the device can connect directly to transceivers, parallel network controllers, and industrial Ethernet PHYs. The -2 speed grade provides a practical balance between logic performance and power for persistent network infrastructure, while the industrial temperature range supports factory equipment. The design should verify transceiver timing against the FPGA pins, constrain all asynchronous interfaces, and use the manufacturer clocking guidance to avoid recovering timing paths incorrectly.

🧪

Test and Measurement Instrumentation

The XC6SLX25T-2FGG484I suits instrument front ends that need flexible sequencing, pattern generation, timing control, and high parallel I/O. Programmable logic can coordinate stimulus, synchronize multiple converters, implement digital filtering, and interface to a host processor without relying on fixed-function glue logic. Its 24,051 logic elements provide room for moderate real-time processing, while the 500 MHz internal-frequency rating supports demanding clocked sections. The 250 I/O also allows the FPGA to connect directly to test fixtures, ADC outputs, and status lines. For laboratory equipment, thermal design and measurement accuracy should be treated separately from the logic performance: configure unused I/O appropriately, control clock jitter, and validate timing margins using the final device speed grade and package construction.

📺

Embedded Video and Image Processing

The XC6SLX25T-2FGG484I is suitable for moderate-resolution image acquisition, pixel transport, color processing, and control functions when a compact programmable-logic solution is preferred over a higher-cost processor. Its 250 I/O can accommodate parallel camera, display, and memory interfaces, while 936 kbit of embedded memory supports line buffers and short-term filtering. The 24,051 logic elements allow sensor readout, interpolation, thresholding, and display timing to run concurrently in dedicated pipelines. Clock-domain and video-timing constraints must be implemented explicitly, and high-speed interfaces require careful PCB signal-integrity work on the 0.80 mm-pitch BGA. Designers should also verify that the selected memory interface, supported I/O standards, and intended clock rates are implemented successfully in the development environment before committing to a board revision.

✈️

Aerospace and Defense Control Systems

The XC6SLX25T-2FGG484I can be evaluated for control, monitoring, and interface functions where programmable logic, extensive I/O, and a 45 nm FPGA architecture are useful. Its 24,051 logic elements and 936 kbit of embedded memory permit local sequencing, fault detection, data routing, and peripheral control without depending on a large processor. The 0 °C to 85 °C range must be checked against the actual environmental envelope, and the part is not identified as an automotive-grade or otherwise specially qualified device in the available ordering information. Qualification for flight or defense use requires review of radiation, reliability, traceability, long-term supply, and configuration-management requirements using the applicable AMD documentation and program-specific screening rules.

What are the key specifications of XC6SLX25T-2FGG484I that engineers should know?
The XC6SLX25T-2FGG484I is a Spartan-6 LXT FPGA with 24,051 logic elements, 3,758 adaptive logic modules, 936 kbit of embedded memory, 250 I/O, and a 500 MHz internal-frequency rating. It uses 45 nm CMOS, operates from 1.14 V to 1.26 V, and is specified from 0 °C to 85 °C in a lead-free 484-BBGA package. These figures define the device as a medium-density, high-I/O Spartan-6 LXT option.
Where can I download the XC6SLX25T-2FGG484I datasheet PDF?
The XC6SLX25T-2FGG484I datasheet PDF is available through the manufacturer-document link listed on this page. It is also indexed by Digchip and DigChip under the exact ordering code XC6SLX25T-2FGG484I. Use the manufacturer document for final pin descriptions, timing limits, power characteristics, absolute maximum ratings, and package drawings because the available listing excerpts summarize rather than reproduce those technical sections.
Where can I find the XC6SLX25T-2FGG484I pinout and package details?
The XC6SLX25T-2FGG484I uses a lead-free 484-BBGA package measuring 15 mm by 15 mm with a 0.80 mm pitch. The manufacturer Spartan-6 documentation contains the definitive ball assignment and package drawing. Assign PCB tracks by following that ball map rather than treating the four package families as interchangeable; the available listing information confirms the package dimensions but does not reproduce all 484 ball names.
What does the -2 speed grade mean for XC6SLX25T-2FGG484I?
The -2 designation identifies the middle Spartan-6 performance grade, with -3 offering higher performance and -1L providing the lower-performance family option. The XC6SLX25T-2FGG484I is also listed at a 500 MHz internal frequency and 24051 logic elements. Actual design performance still depends on the selected clocking resources, I/O standards, timing constraints, and implementation results in the development tool.
What is the difference between XC6SLX25T and XC6SLX25T-2FGG484I?
XC6SLX25T identifies the Spartan-6 LXT family and base device, while XC6SLX25T-2FGG484I is the complete orderable part number. The suffix -2 specifies the speed grade, FGG484 identifies the 484-ball package, and I identifies the industrial temperature option. The published specifications for the exact part include 24,051 logic elements, 250 I/O, 936 kbit of embedded memory, and a 0 °C to 85 °C operating range.
Is XC6SLX25T-2FGG484I suitable for industrial control systems?
The XC6SLX25T-2FGG484I is suitable for industrial control work when the design stays within its published 0 °C to 85 °C range and uses a qualified 1.2 V power architecture. Its 24,051 logic elements and 250 I/O suit control logic, communication bridges, data capture, and parallel interfaces. The industrial temperature marking supports its use in extended-temperature equipment, but system-level thermal and EMC requirements still need separate validation.
XC6SLX25T-2FGG484I vs XC6SLX25T-3FGG484I: which should I choose?
Choose XC6SLX25T-2FGG484I when the -2 speed grade provides sufficient timing margin at lower cost or lower acquisition difficulty than a -3 device. Choose the -3 version when timing closure, pipeline depth, interface performance, or clocking margin requires the highest Spartan-6 LXT performance grade. Both use the same FGG484 package organization in this comparison, but the final choice should follow static timing analysis of the actual design.
When should I choose XC6SLX25T-2FGG484I over XC6SLX25-2FGG484I?
Choose the XC6SLX25T-2FGG484I when the design can benefit from the LXT feature mix, which adds logic-oriented resources to the base Spartan-6 LX device. Choose XC6SLX25-2FGG484I when the design uses only basic LX resources and does not require LXT-specific blocks. Both are presented in the 484-BBGA format for the cited comparison, but device migration must also be checked for supported clocks, hard peripherals, IP compatibility, and bitstream differences.
What can replace XC6SLX25T-2FGG484I without changing the PCB footprint?
The closest same-footprint candidates are the Spartan-6 LXT 484-BBGA variants differing in speed grade or industrial/commercial temperature designation, including XC6SLX25T-2FGG484C, XC6SLX25T-3FGG484I, XC6SLX25T-1FGG484I, and XC6SLX25-2FGG484I. A replacement should be qualified against pin assignments, speed, temperature range, power behavior, supported configuration data, and the installed bitstream before production use.
Is XC6SLX25T-2FGG484I the same as XC6SLX25T-2FGG484C?
No, the XC6SLX25T-2FGG484I and XC6SLX25T-2FGG484C share the -2 speed grade and FGG484 package, but the final I-versus-C designation identifies different temperature options. The I version is specified from 0 °C to 85 °C, while the C version represents the commercial-temperature ordering option. They are therefore footprint-oriented alternatives, but they are not interchangeable in applications with different ambient-temperature requirements.
Where can I buy XC6SLX25T-2FGG484I online?
Use the Request a Quote form on this page to request the exact XC6SLX25T-2FGG484I, current lead time, stock status, and authorized supply. The ordering code includes the -2 speed grade, FGG484 package, and industrial temperature designation, all of which should be repeated in the request. Confirm that the quote is for the complete MPN rather than the related XC6SLX25-2FGG484I base-device variant.
What is the price of XC6SLX25T-2FGG484I?
The current commercial price of the XC6SLX25T-2FGG484I should be requested through the Request a Quote form on this page. Because component pricing can change with market conditions, quantity, date code, and authorized supply, the form provides the appropriate purchasing path for an exact-MPN quote. The request should specify the required quantity, 484-BBGA package, -2 speed grade, and industrial temperature option.
What is the lead time and stock status for XC6SLX25T-2FGG484I?
Request the current lead time and stock allocation through the Request a Quote form on this page. A meaningful commitment requires the exact XC6SLX25T-2FGG484I ordering code, annual and build quantities, date-code requirements, and target delivery schedule. The presence of a current listing does not guarantee a fixed lead time, so the supplier should confirm availability against the actual purchase order.
How much power does XC6SLX25T-2FGG484I dissipate?
The exact XC6SLX25T-2FGG484I power dissipation depends on configuration, I/O activity, clocking, static power, and the selected core voltage, so it cannot be represented by one fixed value. The device operates from 1.14 V to 1.26 V, but this is a voltage range rather than a power rating. Use the manufacturer Spartan-6 power-estimation tools and device documentation with the proposed design to calculate junction temperature and external supply capacity.
What compliance and assembly attributes apply to XC6SLX25T-2FGG484I?
The XC6SLX25T-2FGG484I is described as a lead-free 484-BBGA and is listed at MSL 3, corresponding to a 168-hour floor-life classification. The available technical material does not explicitly confirm RoHS, REACH, conflict-minerals, halogen-free, or automotive qualification status, so those attributes should not be inferred from the package marking alone. Obtain the current manufacturer product documentation or declaration before making a compliance commitment.

엔지니어링 참조 데이터: XC6SLX25T-2FGG484I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC6SLX25T-2FGG484I when the design needs the Spartan-6 LXT feature mix, 24,051 logic elements, 250 I/O, and an industrial 0 °C to 85 °C rating in an FGG484 package. Use XC6SLX25T-2FGG484C when the same -2 performance is suitable but the commercial temperature grade is sufficient. Consider XC6SLX25T-3FGG484I when timing closure requires more performance than -2 provides, or XC6SLX25T-1FGG484I when lower performance is acceptable and the design has ample timing margin. XC6SLX25-2FGG484I is appropriate only when the base LX resources are sufficient; its listed 266 I/O differs from the target's 250 I/O, and LXT-specific functions may not transfer. Before approving any substitution, verify the complete ball assignment, power behavior, configuration method, supported IP, and bitstream compatibility against the exact manufacturer documentation.

대체품과의 비교

파라미터 이 제품 XC6SLX25T-2FGG484C XC6SLX25T-3FGG484I XC6SLX25T-1FGG484I XC6SLX25-2FGG484I XC6SLX25T-2FGG484
Brand AMD AMD AMD AMD AMD AMD
Package 484-BBGA (FGG484) 484-BBGA (FGG484) 484-BBGA (FGG484) 484-BBGA (FGG484) 484-BBGA (FGG484) 484-BBGA (FGG484)
Device Family Spartan-6 LXT Spartan-6 LXT Spartan-6 LXT Spartan-6 LXT Spartan-6 LX Spartan-6 LXT
Speed Grade -2 -2 -3 -1 -2 -2

주요 차별점

  • Provides the LXT feature mix with a medium-density 24,051-LE configuration (vs XC6SLX25-2FGG484I)
  • Maintains the same -2 speed grade as the cited commercial-temperature alternative (vs XC6SLX25T-2FGG484C)
  • Offers a lower-performance same-family migration path for cost-sensitive timing closure (vs XC6SLX25T-3FGG484I)
  • Provides a higher-performance upgrade path within the same package family (vs XC6SLX25T-1FGG484I)

설계 노트

The 1.2 V core supply does not remove the need for thermal analysis because dynamic power still produces heat inside the 484-BBGA. Use the manufacturer's power estimator with the actual clock, I/O standard, utilization, and activity assumptions, then calculate junction temperature from the selected PCB construction. Use the exposed board area and copper planes around the BGA to spread heat, and avoid placing heat-generating components directly beneath the device without conducting a board-level thermal study.

The FGG484 package uses a 0.80 mm ball pitch, so the PCB footprint, solder-mask and paste design, and assembly process must be validated for fine-pitch BGA construction. Place decoupling capacitors close to the relevant supply balls and use the manufacturer's recommended power and ground connectivity. Review the package drawing for ball pitches, rows, and thermal-array requirements before release, because line-routing errors at this pitch can affect soldering reliability and high-speed signal return paths.

Do not treat XC6SLX25T-2FGG484I as interchangeable with the non-T XC6SLX25-2FGG484I merely because both use FGG484. The listed I/O counts differ, with 250 I/O for the LXT target and 266 I/O for the LX variant, and the LXT and LX feature mixes are not functionally identical. Also verify that -1, -2, and -3 speed grades meet the design's timing requirement. Confirm the exact bitstream and configuration compatibility before substitution.

Apply the manufacturer constraints for each selected I/O standard and keep high-fanout or externally exposed signals away from the FPGA unless required. The 250 I/O arrangement can create simultaneous-switching-noise and return-path challenges, particularly when many outputs change at once. Use the development environment for timing and pin constraints, inspect implemented signal integrity on the actual PCB stack-up, and provide continuous supply and ground distribution to reduce noise coupling into the 1.2 V core rail.

Preserve the manufacturer's guidance for configuration pins, clock inputs, dedicated pins, and user I/O during initial placement. Leave required power, ground, and reserved connections unobstructed, and route clocks as controlled nets with minimized stubs and appropriate return paths. The 45 nm Spartan-6 LXT device supports programmable logic and dedicated resources, so placing only by package-ball convenience can produce avoidable clock-routing or implementation problems.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The package is identified as lead-free. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were identified for the exact MPN, so those fields remain unknown. The device is an industrial-temperature FPGA rather than an automotive-qualified variant.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

XC6SLX25T-2FGG484I datasheet XC6SLX25T-2FGG484I pinout XC6SLX25T-2FGG484I specifications XC6SLX25T-2FGG484I replacement XC6SLX25T-2FGG484I equivalent XC6SLX25T-2FGG484I price XC6SLX25T-2FGG484I stock AMD XC6SLX25T-2FGG484I xc6slx25t 2csg324i xc6slx25t 2fgg484c xc6slx25t 3csg324i XC6SLX25T-2FGG484I vs XC6SLX25T-2FGG484C XC6SLX25T 484-BBGA pinout XC6SLX25T-2FGG484I industrial control FPGA XC6SLX25T-2FGG484I 24K LEXT FPGA

관련 부품 & 용어

AMD XC6SLX25T-2FGG484I XC6SLX25T-2FGG484C XC6SLX25T-3FGG484I XC6SLX25T-1FGG484I XC6SLX25-2FGG484I Spartan-6 Spartan-6 LXT field-programmable gate array FPGA programmable logic adaptive logic module ALM embedded memory user I/O 45 nm CMOS 500 MHz 1.2 V 484-BBGA FGG484 BGA surface-mount package industrial temperature grade lead-free packaging MSL 3
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기