XC6SLX25T-2FGG484I - 24K LEXT Spartan-6 FPGA | AMD
N.º da peça: XC6SLX25T-2FGG484I ✓ AtivoXC6SLX25T-2FGG484I Visão geral
A field-programmable gate array is a semiconductor whose digital logic, interfaces, and signal processing can be configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, where it combines configurable logic blocks, programmable I/O, embedded memory, clocking resources, and dedicated hard processors or blocks. The Spartan-6 LXT family extends the Spartan-6 architecture with logic optimized for demanding embedded signal-processing and control systems rather than only general-purpose glue logic.
The XC6SLX25T provides 24,051 logic elements, 3,758 adaptive logic modules, and 936 kbit of embedded memory according to the manufacturer comparison data. Its 250 I/O provide substantial connectivity for parallel buses, control signals, serial interfaces, and external memory. A 500 MHz internal-frequency figure supports demanding clocked logic, while the 45 nm CMOS implementation and 1.2 V nominal core supply fit established low-voltage digital design practices.
The FGG484 package is a lead-free 15 mm by 15 mm ball-grid array with a 0.80 mm pitch. Its high pin count allows the device to expose more programmable I/O than smaller Spartan-6 packages. The package also imposes demanding assembly requirements because fine-pitch balls require a qualified BGA process, suitable PCB land pattern, and careful control of thermal and soldering conditions during assembly.
Typical uses include industrial control, data acquisition, communications equipment, embedded processing, test and measurement, and high-density programmable logic. The LXT feature mix and 24,051 logic elements make the device suitable when a design needs substantially more parallel I/O and logic capacity than a small control FPGA while retaining a 45 nm Spartan-6 footprint and architecture.
A critical design consideration is thermal management: the 1.2 V core supply and dense BGA package require a PCB construction that can remove heat from the device. Because the available material does not provide detailed power, thermal-resistance, or absolute-maximum ratings, those values should be taken directly from the manufacturer Spartan-6 documentation before finalizing the power tree and board stack-up.
This page combines the exact ordering information, electrical identifiers, package characteristics, engineering applications, and same-package replacement considerations needed to qualify the XC6SLX25T-2FGG484I for a new programmable-logic design.
Alternativas drop-in para XC6SLX25T-2FGG484I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC6SLX25T-2FGG484I (mesmo formato e footprint) — diferindo em Device Type, Package, User I/O, Operating Temperature, Package Type.
XC6SLX25T-2FGG484C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX25T-3FGG484I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC6SLX25T-1FGG484I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC6SLX25-2FGG484I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX25T-2FGG484C
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC6SLX25T-2FGG484I Classificações máximas e características elétricas
| Device Type | Spartan-6 LXT field-programmable gate array |
| Logic Elements | 24,051 LE |
| Adaptive Logic Modules | 3,758 ALM |
| Embedded Memory | 936 kbit |
| User I/O | 250 I/O |
| Internal Frequency | 500 MHz |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Nominal Supply Voltage | 1.2 V |
| Speed Grade | -2 |
| Temperatura de operação | 0 °C to 85 °C |
| Encapsulamento | 484-BBGA, 15 mm × 15 mm, 0.80 mm pitch |
| Package Lead Finish | Lead-free |
| Package Side | Top-side BGA |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| Device Family | Spartan-6 LXT |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do XC6SLX25T-2FGG484I top-side bga
Configuração de pinos para XC6SLX25T-2FGG484I (pacote top-side bga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC6SLX25T-2FGG484I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC6SLX25T-2FGG484I é adequado para 6 aplicaçãos: Industrial PLC and Automation Control, Data Acquisition and Signal Processing, Communications and Network Interface, Test and Measurement Instrumentation, Embedded Video and Image Processing, Aerospace and Defense Control Systems.
Industrial PLC and Automation Control
The XC6SLX25T-2FGG484I fits industrial control equipment that needs deterministic programmable logic, numerous field-bus signals, and a 0 °C to 85 °C operating range. Its 24,051 logic elements and 3,758 adaptive logic modules can implement sequencing, interlocks, counters, protocol state machines, and control logic in parallel, while 250 I/O provide substantial connectivity for sensors and actuators. The device can sit between a supervisory processor and external transceivers, performing timing-critical signal conditioning and protocol conversion. The 45 nm Spartan-6 LXT architecture also supports established clocking and memory resources needed for deterministic control. Design validation should include power estimation, signal-integrity review for the 0.80 mm-pitch BGA, and timing closure under the expected clock and I/O conditions.
Recomendado
Data Acquisition and Signal Processing
The XC6SLX25T-2FGG484I is appropriate for parallel data acquisition, filtering, and real-time signal conditioning because it combines 24,051 logic elements with 936 kbit of embedded memory and 250 I/O. Parallel converter outputs can be captured, aligned, filtered, and routed through programmable pipelines, reducing the processing burden on an external processor. The listed 500 MHz internal-frequency rating provides a strong basis for clocked logic, although actual throughput must be established through timing analysis. The large I/O count is especially useful when multiple converters, digital sensors, or framing devices must be supported simultaneously. Engineers should budget acquisition timing uncertainty, implement clocks according to the manufacturer guidance, and confirm that the selected I/O standards provide adequate noise margin for the target signal amplitudes.
Recomendado
Communications and Network Interface
The XC6SLX25T-2FGG484I can implement communication line-rate interfaces, packet framing, buffering, and protocol bridging in equipment with modest external processors. Its 3,758 adaptive logic modules are useful for parallel-to-serial conversion, clock-domain crossing, state machines, and backpressure handling, while 936 kbit of embedded memory supports finite buffering. With 250 I/O, the device can connect directly to transceivers, parallel network controllers, and industrial Ethernet PHYs. The -2 speed grade provides a practical balance between logic performance and power for persistent network infrastructure, while the industrial temperature range supports factory equipment. The design should verify transceiver timing against the FPGA pins, constrain all asynchronous interfaces, and use the manufacturer clocking guidance to avoid recovering timing paths incorrectly.
Recomendado
Test and Measurement Instrumentation
The XC6SLX25T-2FGG484I suits instrument front ends that need flexible sequencing, pattern generation, timing control, and high parallel I/O. Programmable logic can coordinate stimulus, synchronize multiple converters, implement digital filtering, and interface to a host processor without relying on fixed-function glue logic. Its 24,051 logic elements provide room for moderate real-time processing, while the 500 MHz internal-frequency rating supports demanding clocked sections. The 250 I/O also allows the FPGA to connect directly to test fixtures, ADC outputs, and status lines. For laboratory equipment, thermal design and measurement accuracy should be treated separately from the logic performance: configure unused I/O appropriately, control clock jitter, and validate timing margins using the final device speed grade and package construction.
Recomendado
Embedded Video and Image Processing
The XC6SLX25T-2FGG484I is suitable for moderate-resolution image acquisition, pixel transport, color processing, and control functions when a compact programmable-logic solution is preferred over a higher-cost processor. Its 250 I/O can accommodate parallel camera, display, and memory interfaces, while 936 kbit of embedded memory supports line buffers and short-term filtering. The 24,051 logic elements allow sensor readout, interpolation, thresholding, and display timing to run concurrently in dedicated pipelines. Clock-domain and video-timing constraints must be implemented explicitly, and high-speed interfaces require careful PCB signal-integrity work on the 0.80 mm-pitch BGA. Designers should also verify that the selected memory interface, supported I/O standards, and intended clock rates are implemented successfully in the development environment before committing to a board revision.
Recomendado
Aerospace and Defense Control Systems
The XC6SLX25T-2FGG484I can be evaluated for control, monitoring, and interface functions where programmable logic, extensive I/O, and a 45 nm FPGA architecture are useful. Its 24,051 logic elements and 936 kbit of embedded memory permit local sequencing, fault detection, data routing, and peripheral control without depending on a large processor. The 0 °C to 85 °C range must be checked against the actual environmental envelope, and the part is not identified as an automotive-grade or otherwise specially qualified device in the available ordering information. Qualification for flight or defense use requires review of radiation, reliability, traceability, long-term supply, and configuration-management requirements using the applicable AMD documentation and program-specific screening rules.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC6SLX25T-2FGG484I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC6SLX25T-2FGG484C | XC6SLX25T-3FGG484I | XC6SLX25T-1FGG484I | XC6SLX25-2FGG484I | XC6SLX25T-2FGG484 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-BBGA (FGG484) | 484-BBGA (FGG484) | 484-BBGA (FGG484) | 484-BBGA (FGG484) | 484-BBGA (FGG484) | 484-BBGA (FGG484) |
| Device Family | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LXT | Spartan-6 LX | Spartan-6 LXT |
| Speed Grade | -2 | -2 | -3 | -1 | -2 | -2 |
Principais diferenciais
- Provides the LXT feature mix with a medium-density 24,051-LE configuration (vs XC6SLX25-2FGG484I)
- Maintains the same -2 speed grade as the cited commercial-temperature alternative (vs XC6SLX25T-2FGG484C)
- Offers a lower-performance same-family migration path for cost-sensitive timing closure (vs XC6SLX25T-3FGG484I)
- Provides a higher-performance upgrade path within the same package family (vs XC6SLX25T-1FGG484I)
Notas de projeto
The 1.2 V core supply does not remove the need for thermal analysis because dynamic power still produces heat inside the 484-BBGA. Use the manufacturer's power estimator with the actual clock, I/O standard, utilization, and activity assumptions, then calculate junction temperature from the selected PCB construction. Use the exposed board area and copper planes around the BGA to spread heat, and avoid placing heat-generating components directly beneath the device without conducting a board-level thermal study.
The FGG484 package uses a 0.80 mm ball pitch, so the PCB footprint, solder-mask and paste design, and assembly process must be validated for fine-pitch BGA construction. Place decoupling capacitors close to the relevant supply balls and use the manufacturer's recommended power and ground connectivity. Review the package drawing for ball pitches, rows, and thermal-array requirements before release, because line-routing errors at this pitch can affect soldering reliability and high-speed signal return paths.
Do not treat XC6SLX25T-2FGG484I as interchangeable with the non-T XC6SLX25-2FGG484I merely because both use FGG484. The listed I/O counts differ, with 250 I/O for the LXT target and 266 I/O for the LX variant, and the LXT and LX feature mixes are not functionally identical. Also verify that -1, -2, and -3 speed grades meet the design's timing requirement. Confirm the exact bitstream and configuration compatibility before substitution.
Apply the manufacturer constraints for each selected I/O standard and keep high-fanout or externally exposed signals away from the FPGA unless required. The 250 I/O arrangement can create simultaneous-switching-noise and return-path challenges, particularly when many outputs change at once. Use the development environment for timing and pin constraints, inspect implemented signal integrity on the actual PCB stack-up, and provide continuous supply and ground distribution to reduce noise coupling into the 1.2 V core rail.
Preserve the manufacturer's guidance for configuration pins, clock inputs, dedicated pins, and user I/O during initial placement. Leave required power, ground, and reserved connections unobstructed, and route clocks as controlled nets with minimized stubs and appropriate return paths. The 45 nm Spartan-6 LXT device supports programmable logic and dedicated resources, so placing only by package-ball convenience can produce avoidable clock-routing or implementation problems.
Informações de conformidade
The package is identified as lead-free. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations were identified for the exact MPN, so those fields remain unknown. The device is an industrial-temperature FPGA rather than an automotive-qualified variant.