XC7A200T-1FB484I - 215K-Cell Artix-7 FPGA | AMD | Industrial
부품 번호: XC7A200T-1FB484I ✓ 활성XC7A200T-1FB484I 개요
An FPGA is a programmable semiconductor in the broader hierarchy of programmable logic devices, logic integrated circuits, and digital semiconductors. Artix-7 devices combine configurable logic, block RAM, programmable input/output, and dedicated clocking resources on one device. This combination allows designers to implement parallel digital logic, interface adaptation, signal processing, and embedded control functions without relying on a fixed application-specific circuit.
The XC7A200T-1FB484I provides 215,360 logic cells, 134,553,60 as presented by the distributor record, 485,360 register bits, and an operating core voltage identified as 1 V. The industrial ordering suffix selects extended-temperature suitability, while the speed-grade 1 suffix indicates the device performance class within the Artix-7 family. Its 484-ball fine-pitch package supports high-density connections while requiring careful PCB layout, thermal analysis, and assembly control.
The Artix-7 architecture is suitable for designs that require more parallelism than a microcontroller or discrete logic implementation can provide. Its fabric can host parallel data paths, control state machines, protocol bridges, and fixed-pipeline processing blocks. Dedicated memory resources support buffering and data alignment, while programmable I/O can accommodate multiple interface standards within the electrical limits of the selected banks and package pins.
Typical applications include industrial automation, camera and imaging control, communications infrastructure, test and measurement systems, instrumentation, and embedded signal-processing equipment. The device is also appropriate for prototype platforms where programmable logic allows interfaces, timing, and control algorithms to be revised without changing the PCB.
The primary design consideration is the fine-pitch BGA land pattern. A qualified PCB stack-up, escape-routing strategy, power-distribution network, and assembly process are necessary for reliable manufacture. Designers should also confirm the exact pinout, supported I/O standards, configuration method, and power requirements in AMD package documentation before releasing the hardware.
This product record combines the verified device identity, package information, family-level architecture, and engineering guidance with commercial forms for quotation, availability, and lifecycle review. It also provides focused selection criteria for distinguishing speed-grade, temperature-grade, and package variants before design commitment.
드롭인 대체품: XC7A200T-1FB484I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7A200T-1FB484I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Mounting Type, Device Type, Temperature Grade.
XC7A200T-1FBG484C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7A200T-1FBG484E
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7A200T-2FBG484I
✅ 드롭인 ⚠️ 사양 미검증✗ 재고 없음
$89.15 / 개
데이터시트 보기 →XC7A200T-1SBG484I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7A200T-1SB484I
✅ 드롭인가격 문의
데이터시트 보기 →XC7A200T-1FB484I 최대 정격 & 전기적 특성
| Device Type | Artix-7 Field Programmable Gate Array (FPGA) |
| Programmable Logic Cells | 215,360 cells |
| System Logic Cells | 285,000 cells |
| Register Bits | 485,360 bits |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | Grade 1 |
| Temperature Grade | Industrial, -40 C to +100 C |
| 패키지 | 484-BBGA, lidless FCBGA |
| Package Designation | FB484 |
| Package Dimensions | 23 x 23 mm |
| Ball Pitch | 1.0 mm |
| Ball Count | 484 balls |
| 실장 유형 | Surface Mount |
| Product Family | Artix-7 |
| Programmable Logic Type | FPGA |
XC7A200T-1FB484I 23 x 23 mm 핀 구성 가이드
XC7A200T-1FB484I(23 x 23 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7A200T-1FB484I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7A200T-1FB484I 적합 용도: 6 애플리케이션s: Industrial Automation and Control, Camera and Imaging Control, Communications Infrastructure, Test and Measurement Instrumentation, Industrial Sensor Aggregation, Embedded Signal Processing.
Industrial Automation and Control
The XC7A200T-1FB484I fits industrial control systems that need multiple parallel channels, deterministic sequencing, and adaptable I/O behavior. Its 215,360 programmable logic cells and 485,360 register bits can implement motion-control state machines, machine interlocks, protocol conversion, and sensor conditioning logic in one programmable device. The industrial-temperature grade is appropriate for equipment operating beyond a room-temperature commercial environment. Place the FPGA beside the controlled power and sensor interfaces, then allocate separate clocking and power regions to avoid coupling noisy switching stages into timing-critical logic.
추천
Camera and Imaging Control
The XC7A200T-1FB484I is suitable for camera modules that require parallel capture control, frame synchronization, exposure control, and data-path routing. Its large programmable fabric allows multiple independent image-processing stages to execute concurrently, while the 1 V core operation suits high-performance logic systems. The designer should use the official FB484 pinout to map clocks, data lanes, control signals, and configuration pins, and should keep high-speed data routes short and impedance controlled to preserve signal integrity from sensor to processor.
추천
Communications Infrastructure
The XC7A200T-1FB484I can serve in communications equipment requiring parallel packet processing, buffering, aggregation, and interface adaptation. The 215,360 logic cells allow designers to implement multiple data paths concurrently, while dedicated programmable I/O supports board-level communication interfaces when their voltage and timing requirements are met. For line-card or baseband designs, isolate high-speed transceiver lanes from sensitive control logic, maintain continuous reference-clock distribution, and verify every high-speed I/O standard against the device's supported bank configurations.
추천
Test and Measurement Instrumentation
The XC7A200T-1FB484I is well suited to programmable test and measurement front ends that require configurable timing, acquisition pipelines, trigger logic, and protocol support. Its logic fabric can combine multiple counters, digital pattern generators, decision trees, and acquisition control blocks without relying exclusively on a microcontroller. The designer should partition critical timing paths from analog-adjacent circuitry, use clock-capable pins for high-fidelity clock distribution, and validate jitter, I/O standards, and acquisition bandwidth before committing to the device configuration.
추천
Industrial Sensor Aggregation
The XC7A200T-1FB484I can aggregate and process data from multiple industrial sensors when the design requires configurable digital filtering, event correlation, and timestamp handling. Its 215,360 logic cells support parallel sensor channels, while the 485,360 register bits provide state and buffering resources for deterministic pipelines. Use the industrial-temperature ordering grade only after checking the complete enclosure temperature profile, and isolate field-side inputs from sensitive logic. Configuration storage, watchdogs, and startup sequencing should be included so the system remains recoverable after power interruptions.
추천
Embedded Signal Processing
The XC7A200T-1FB484I supports fixed-pipeline and parallel signal-processing implementations that benefit from deterministic hardware execution. The programmable fabric can implement filters, correlation, interpolation, data formatting, and control functions while the 485,360 register bits support intermediate data paths. For analog or mixed-signal systems, the FPGA should be paired with suitable converters and clocking circuitry, with attention to conversion latency, data alignment, and clock-domain crossings. Validate throughput and timing using realistic traffic rather than isolated block performance.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7A200T-1FB484I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A200T-1FBG484C | XC7A200T-1FBG484E | XC7A200T-2FBG484I | XC7A200T-1SBG484I | XC7A200T-1SB484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-BBGA, lidless FCBGA | 484-BBGA, lidless FCBGA | 484-BBGA, lidless FCBGA | 484-BBGA, lidless FCBGA | 484-BBGA, lidless FCBGA | 484-BBGA, lidless FCBGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Programmable Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Speed Grade | Grade 1 | Grade 1 | Grade 1 | Grade 2 | Grade 1 | Grade 1 |
| Temperature Grade | Industrial, -40 C to +100 C | Commercial, 0 C to +85 C | Extended temperature grade | Industrial, -40 C to +100 C | Industrial, -40 C to +100 C | Industrial, -40 C to +100 C |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
주요 차별점
- Industrial temperature coverage (vs XC7A200T-1FBG484C)
- Identical Artix-7 logic capacity (vs XC7A200T-2FBG484I)
- Fine-pitch high-density integration (vs XC7A200T-1SB484I)
설계 노트
Treat the 484-ball, 1.0 mm-pitch FCBGA as a demanding fine-pitch assembly. Base the PCB stack-up on the package mechanical drawing, route escape layers consistently, and maintain the required ball-pad geometry and solder-mask definition. Confirm the assembly house's capability for the selected board size, copper weight, via strategy, and X-ray inspection requirements before schematic and layout sign-off.
Separate core, I/O, and auxiliary supply routing according to the AMD power-distribution guidance, then use the device's recommended decoupling network close to the relevant balls. Estimated power depends on design utilization, I/O activity, clocking, and voltage; calculate junction temperature from the actual board and enclosure rather than using logic-cell count alone. Provide current headroom for startup, configuration, and worst-case I/O states.
Assign clocks and high-speed interfaces only to pins approved for their signaling requirements in the official FB484 pinout. Keep configuration pins, dedicated grounds, and user I/O assignments consistent across schematic, constraints, and PCB files. Use a repeatable ball-map verification step to catch translated or mirrored BGA errors, and compare the final netlist against the AMD package pinout file before fabrication.
Plan thermal performance around the lidless FCBGA package, exposed thermal balls, copper layers, vias, airflow, and the maximum expected ambient temperature. Estimated: with total device dissipation represented as P and effective board-to-ambient resistance represented as Theta_EA, junction rise is approximately P multiplied by Theta_EA; replace these variables with values from the actual PCB and enclosure design before making a thermal decision.
규정 준수 정보
The FB484 package is described as a lidless FCBGA, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement is present. The industrial-temperature suffix does not by itself establish AEC-Q100 qualification.
