BCM6123TD1E5126T0R vs BCM6123TD1E5126T01 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BCM6123TD1E5126T0R disebabkan oleh Vicor dan BCM6123TD1E5126T01 disebabkan oleh Vicor. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BCM6123TD1E5126T0R | BCM6123TD1E5126T01 |
|---|---|---|
| Merek | Vicor | Vicor |
| Kategori | DC-DC Converters | DC-DC Converters |
| Status Lingkungan Hidup | Aktif | Aktif |
| Tetstruktur | BCM Bus Converter Module (fixed-ratio isolated DC-DC) | Sine Amplitude Converter (SAC), isolated fixed-ratio |
| Kemasan | 6123 ChiP through-hole (63.34 x 22.80 x 7.21 mm) | Through-hole ChiP (BCM6123) |
| Gambaran Tegangan Masukan | 260 V to 410 V DC (nominal 380 V) | 260 V to 410 V |
| Tegangan Output | 47.5 V DC nominal (8.1-51.3 V SELV family range) | — |
| Output Current | 25.7 A continuous | — |
| Output Power | Approximately 1.2 kW continuous at full load | — |
| Peak Efficiency | 97.9% | 97.9% |
| Power Density | 1876 W/in3 | 1876 W/in³ |
| Isolation Voltage | 4242 VDC | — |
| Transformation Ratio (K) | 1/8 (K=1/8) | 1/8 (K=1/8) |
| Switching Topology | Vicor ZVS/ZCS sine amplitude converter | — |
| Control Interface | Analog (Rev T suffix) | — |
| Parallel Operation | Yes - supports multi-kW arrays | Supported for multi-kW arrays |
| Protections | OV, OC, UV, short-circuit, thermal shutdown | OV, OC, UV, short circuit, thermal |
| Jenis Pemasangan | Through-hole ChiP | — |
| Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40°C to +125°C (see derating curves) |
| MTBF | [DATA_NEEDED: MTBF figure] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Nominal Input Voltage | — | 380 V |
| Output Voltage (nominal) | — | 47.5 V |
| Continuous Output Current | — | 25.7 A |
| Continuous Output Power | — | 1220 W (47.5 V x 25.7 A) |
| Isolation Voltage (Input to Output) | — | 4242 VDC |
| Device Grade | — | T01 (telemetry/control) |
| Cooling Method | — | Forced air or cold-plate recommended for full load |