BCM6123TD1E5126T0R vs BCM6123TD1E5126T01 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BCM6123TD1E5126T0R tarafından Vicor ve BCM6123TD1E5126T01 tarafından VicorAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BCM6123TD1E5126T0R | BCM6123TD1E5126T01 |
|---|---|---|
| Marka | Vicor | Vicor |
| Kategori | DC-DC Converters | DC-DC Converters |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Ağ Yapısı | BCM Bus Converter Module (fixed-ratio isolated DC-DC) | Sine Amplitude Converter (SAC), isolated fixed-ratio |
| Paket | 6123 ChiP through-hole (63.34 x 22.80 x 7.21 mm) | Through-hole ChiP (BCM6123) |
| Giriş电压范围 | 260 V to 410 V DC (nominal 380 V) | 260 V to 410 V |
| Çıkış Gerilimi | 47.5 V DC nominal (8.1-51.3 V SELV family range) | — |
| Output Current | 25.7 A continuous | — |
| Output Power | Approximately 1.2 kW continuous at full load | — |
| Peak Efficiency | 97.9% | 97.9% |
| Power Density | 1876 W/in3 | 1876 W/in³ |
| Isolation Voltage | 4242 VDC | — |
| Transformation Ratio (K) | 1/8 (K=1/8) | 1/8 (K=1/8) |
| Switching Topology | Vicor ZVS/ZCS sine amplitude converter | — |
| Control Interface | Analog (Rev T suffix) | — |
| Parallel Operation | Yes - supports multi-kW arrays | Supported for multi-kW arrays |
| Protections | OV, OC, UV, short-circuit, thermal shutdown | OV, OC, UV, short circuit, thermal |
| Montaj Türü | Through-hole ChiP | — |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | -40°C to +125°C (see derating curves) |
| MTBF | [DATA_NEEDED: MTBF figure] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Nominal Input Voltage | — | 380 V |
| Output Voltage (nominal) | — | 47.5 V |
| Continuous Output Current | — | 25.7 A |
| Continuous Output Power | — | 1220 W (47.5 V x 25.7 A) |
| Isolation Voltage (Input to Output) | — | 4242 VDC |
| Device Grade | — | T01 (telemetry/control) |
| Cooling Method | — | Forced air or cold-plate recommended for full load |