BTS426L1E3062AAUMA1 vs BTS70402EPGXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS426L1E3062AAUMA1 disebabkan oleh Infineon dan BTS70402EPGXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | BTS426L1E3062AAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | Classic PROFET 12V | — |
| Fungsi | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Tetstruktur | N-Channel Vertical Power FET with Charge Pump | — |
| Bilangan Output | 1 | — |
| Konfigurasi Output | High-Side | High-side, N-channel MOSFET |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | — |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Kemasan | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TSDSO-14 (exposed thermal pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Gambaran Suhu Operasi | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | -40 °C to +150 °C junction |
| Status RoHS | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |