BTS426L1E3062AAUMA1 vs BTS70402EPGXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTS426L1E3062AAUMA1 sa pamamagitan ng Infineon at BTS70402EPGXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTS426L1E3062AAUMA1 - 7A 12V Smart High-Side Switch | Infineon
BTS426L1E3062AAUMA1 ✓ NakahandaInfineon
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | BTS426L1E3062AAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | Classic PROFET 12V | — |
| Fungsi | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topolohiya | N-Channel Vertical Power FET with Charge Pump | — |
| Bilang ng Outputs | 1 | — |
| Output Kumpigurasyon | High-Side | High-side, N-channel MOSFET |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | — |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Packhaging | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TSDSO-14 (exposed thermal pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Hanay ng Temperature na Operasyon | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | -40 °C to +150 °C junction |
| Tindminan RoHS | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |