BTS426L1E3062AAUMA1 vs BTS70402EPGXUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS426L1E3062AAUMA1 tarafından Infineon ve BTS70402EPGXUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS426L1E3062AAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | Classic PROFET 12V | — |
| Fonksiyon | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Ağ Yapısı | N-Channel Vertical Power FET with Charge Pump | — |
| Çıkış Sayısı | 1 | — |
| Çıkış Konfigürasyonu | High-Side | High-side, N-channel MOSFET |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | — |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| Paket | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TSDSO-14 (exposed thermal pad) |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | -40 °C to +150 °C junction |
| RoHS Durumu | Compliant | — |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Number of Channels | — | 4 |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |