IPG20N04S4L07ATMA1 vs BSC018N04LSGATMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci IPG20N04S4L07ATMA1 disebabkan oleh Infineon dan BSC018N04LSGATMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | IPG20N04S4L07ATMA1 | BSC018N04LSGATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | MOSFETs | MOSFETs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Series | OptiMOS™ T2 | OptiMOS 3 |
| FET Type | 2x N-Channel (Dual, Independent) | N-Channel |
| Drain-to-Source Voltage (VDS) | 40 V | 40 V |
| Continuous Drain Current (ID) | 20 A | — |
| RDS(on) Max @ VGS=10V | 7.2 mΩ (typical) | — |
| Gate Threshold Voltage (VGS(th)) | [DATA_NEEDED: VGS(th) typical value] | — |
| Gate Charge (Qg) | [DATA_NEEDED: total gate charge at VGS=10V] | — |
| Power Dissipation (PD) Max | 65 W | — |
| Suhu Hubungan Operasi | -55°C to +175°C | — |
| Kemasan | PG-TDSON-8-4 (TDSON-8-4) | PG-TDSON-8-1 (SuperSO8 5x6 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Logic-Level Gate Drive | Yes (4.5V VGS fully enhanced) | — |
| Aras MSL | MSL1 (per JEDEC J-STD-020, 260°C peak reflow) | — |
| AEC-Q101 Qualification | Qualified | — |
| Avalanche Tested | 100% (per datasheet) | 100% (per datasheet) |
| RoHS / Lead-Free | RoHS compliant, lead-free terminations | — |
| Technology | — | MOSFET (Metal Oxide) |
| Continuous Drain Current (ID) @ TC=25°C | — | 100 A |
| Continuous Drain Current (ID) @ TA=25°C | — | 30 A |
| Power Dissipation (PD) @ TC=25°C | — | 125 W |
| Power Dissipation (PD) @ TA=25°C | — | 2.5 W |
| RDS(on) Max @ VGS=10 V | — | 1.8 mΩ |
| Drive Voltage (Max RDS(on), Min RDS(on)) | — | 4.5 V, 10 V |
| Gate Threshold Voltage (VGS(th)) Typ | — | [DATA_NEEDED: VGS(th) typical] |
| Gambaran Suhu Operasi | — | -55°C to +150°C (TJ) |
| Status RoHS | — | Compliant (Pb-free plating) |
| JEDEC Qualification | — | Yes (qualified per JEDEC for target applications) |