MC33202PG - 2.2 MHz Dual Rail-to-Rail Op Amp | onsemi
MPN: MC33202PG ✓ AktifMC33202PG Ringkasan
An operational amplifier is an analog signal-processing IC that amplifies the voltage difference between its non-inverting and inverting inputs. The MC33202PG belongs to the rail-to-rail operational-amplifier family, combining input and output common-mode capability with low-voltage operation. This places it within the broader hierarchy of analog ICs, signal-conditioning ICs, amplifiers, and general-purpose operational amplifiers.
Rail-to-rail input operation allows the input voltage to approach either supply rail. According to the onsemi datasheet, inputs can be driven as high as 200 mV beyond the supply rails without causing phase reversal in the outputs. Rail-to-rail output operation allows each output to swing within approximately 50 mV of its corresponding rail, improving output range utilization in low-voltage systems.
The MC33202PG combines a 2.2 MHz gain-bandwidth product with a 1 V/µs slew rate. These values make it suitable for general-purpose signal amplification, low-voltage analog interfaces, and feedback-control circuits where operating from a single 1.8 V supply is useful. Its dual configuration can reduce board area when two independent amplifier channels are required.
Typical uses include sensor-interface amplification, audio and communication signal conditioning, voltage buffering, active filtering, and industrial control-system analog sections. The 1.8 V minimum supply supports portable and embedded systems, while the -40 °C to 105 °C temperature range supports industrial environments when the complete system is qualified for the intended conditions.
Designers should verify input and output limits under the selected supply voltage and load current. Input and output stability should be evaluated with the actual source impedance, feedback network, load, and bypass capacitance. Because this is a through-hole PDIP device, its larger footprint must be considered when replacing it with surface-mount alternatives.
This product summary combines the MC33202PG electrical ratings, package information, pin assignment, practical application guidance, and qualified same-footprint replacement information. The alternatives are restricted to devices presented as pin-to-pin compatible rather than merely similar amplifiers, helping engineers identify a practical migration path without implying electrical identity.
Pilihan pengganti yang segera untuk MC33202PG — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TS3V912IN
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC33202PG Penilaian maksimum & Ciri-ciri Elektrik
| Number of Amplifier Circuits | 2 circuits |
| Amplifier Type | General-purpose operational amplifier |
| Supply Voltage Range | 1.8 V to 12 V |
| Gain-Bandwidth Product | 2.2 MHz |
| Slew Rate | 1 V/µs |
| Input Common-Mode Range | Rail-to-rail; inputs can be driven 200 mV beyond the supply rails without output phase reversal |
| Output Swing | Within approximately 50 mV of each rail |
| Gambaran Suhu Operasi | -40 °C to 105 °C |
| Temperature Grade | Industrial |
| Bilangan Pin | 8 pins |
| Kemasan | 8-pin PDIP |
| Jenis Pemasangan | Through-hole |
| Terminal Form | Through-hole |
| Supply Voltage Type | Single or dual supply operation |
Panduan Konfigurasi Pin MC33202PG 8-pin pdip
Konfigurasi pin untuk MC33202PG (8-pin pdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk MC33202PG.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MC33202PG patut untuk 3 aplikasis: Pengawasan Isyarat, Perolehan Data, Pemrosesan Audio.
Pengawasan Isyarat
Penaik dan menyaring isyarat sensor menggunakan MC33202PG.
Perolehan Data
Mengubah isyarat analog untuk pemrosesan digital dengan MC33202PG.
Pemrosesan Audio
Penaik dan pemrosesan isyarat audio dengan MC33202PG.
Data referensi kejuruteraan untuk MC33202PG — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TS3V912IN |
|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP |
| Brand | onsemi | Texas Instruments |
| Amplifier Count | 2 circuits | 2 circuits |
| Input Common-Mode Behavior | Rail-to-rail; inputs may be driven 200 mV beyond the rails without output phase reversal | Rail-to-rail input |
| Output Common-Mode Behavior | Rail-to-rail; output within approximately 50 mV of each rail | Rail-to-rail output |
| Mounting Style | Through-hole | Through-hole |
Penyeberangsung Jelas
- Original onsemi device with a documented low-voltage operating range (vsTS3V912IN)
- Dual rail-to-rail operation in an industrial-temperature package (vsTS3V912IN)
- Documented input over-rail and output-swing characteristics (vsTS3V912IN)
Catatan Desain
Do not treat rail-to-rail input as permission to exceed the absolute maximum input voltage. Although the MC33202PG can accept inputs 200 mV beyond a supply rail without phase reversal, excessive overdrive can increase current, stress the input stage, or damage the device. Clamp external signals to safe limits and include the power-off state when selecting protection components.
Place the supply bypass capacitors close to the amplifier supply pins and connect the exposed supply and ground pins to low-impedance planes. Keep feedback components adjacent to their associated amplifier pins to minimize parasitic coupling. Because the MC33202PG is an 8-pin PDIP, check the physical pin orientation and socket or lead spacing before inserting a substitute.
Evaluate output settling, slew-rate margin, and channel-to-channel behavior using the intended signal bandwidth. The specified 2.2 MHz gain-bandwidth product and 1 V/µs slew rate support general-purpose low-voltage analog circuits, but large-signal settling can become the limiting factor at low frequencies or high output amplitudes. Use the manufacturer's test methods and application guidance when setting gain and feedback values.
Verify operation across the complete 1.8 V to 12 V supply range rather than testing only at a nominal voltage. The output-swing limit depends on supply headroom, load, and output configuration, while input behavior changes near the rails. Confirm that every downstream signal remains within the amplifier's operating limits at minimum supply, maximum load, and temperature extremes.
Maklumat Kesediaan
The MC33202PG is identified as an industrial-grade component, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable because this is a general-purpose operational amplifier rather than an automotive-qualified device.