Microchip Technology

MCP3422A5-E/MC - 18-Bit Dual-Input Sigma-Delta ADC | Microchip

MPN: MCP3422A5-E/MC ✓ Aktif
2.7 V to 5.5 V Vdss 8-DFN, 2 mm x 3 mm Package
MOQ: 1 |

MCP3422A5-E/MC Ringkasan

The Microchip Technology MCP3422A5-E/MC is an 18-bit, dual-input sigma-delta analog-to-digital converter with a 3.75 Hz conversion rate, 2.7 V to 5.5 V supply range, I2C interface, and onboard voltage reference. The device is packaged in an 8-pin DFN measuring 2 mm by 3 mm, making it suitable for compact precision-measurement systems that require low-noise conversion and a serialized digital interface.

An analog-to-digital converter is an integrated circuit that converts an analog input voltage into a numeric value for processing, storage, display, or control. The MCP3422 belongs to the ADC hierarchy and uses a sigma-delta architecture, which is especially useful for low-frequency precision measurements where narrow bandwidth is more important than high-rate waveform capture. Its two analog input channels allow one converter to serve multiple sensors or measurement nodes.

The MCP3422A5-E/MC provides 18-bit resolution, dual analog inputs, and a 3.75 Hz conversion rate. These characteristics suit temperature, pressure, load-cell, chemical-sensor, and slow industrial process measurements where a stable input signal is sampled over time. Its operating supply range of 2.7 V to 5.5 V supports both 3.3 V and 5 V system architectures, while the I2C interface reduces the number of signal connections required on a compact circuit board.

Sigma-delta conversion uses continuous-time modulation and digital filtering to reduce quantization noise near the signal bandwidth. This makes the architecture appropriate for extracting relatively small changes from sensor outputs without requiring a high-speed successive-approximation ADC. The onboard reference supports a self-contained measurement chain, while external analog conditioning remains important for protecting the inputs and scaling signals into the converter’s measurement range.

Typical applications include battery-powered environmental sensors, industrial pressure transmitters, precision temperature instrumentation, laboratory data-acquisition modules, and low-rate weighing systems. The 2 mm by 3 mm DFN package supports compact sensor assemblies, and the dual-input arrangement can reduce component count when two related analog signals must be measured.

PCB design should prioritize a quiet reference return, short analog traces, and placement of input filtering close to the MCP3422A5-E/MC. Because this is a low-rate precision ADC, switching circuitry and high-current digital paths should be kept away from the analog pins to avoid degrading the measured signal.

This product page combines the exact MCP3422A5-E/MC electrical identity, package information, drop-in family alternatives, comparison data, and practical design guidance to support component selection, PCB planning, and sourcing decisions.

Pilihan pengganti yang segera untuk MCP3422A5-E/MC — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera MCP3422A5-E/MC (sama faktor bentuk dan kaki) — berbeza dalam Package, Digital Interface, Conversion Rate, Differential Input Range, Resolution.

Microchip Technology
Package: 8-pin DFN with exposed pad, 2 x 3 mm
Conversion Rate: 3.75 samples per second
Differential Input Range: ±2.048 V
Microchip Technology
Package: 8-DFN, 2 x 3 mm
Digital Interface: 2-wire I2C
Differential Input Range: ±2.048 V
Microchip Technology
Package: 8-pin SOIC
Digital Interface: Two-wire I2C-compatible
Conversion Rate: 4 samples per second

MCP3422A0-E/MC

✅ Masuk Drop-In
Microchip Technology
📦 8-DFN (2x3)
18 bit · 2 differential inputs · Sigma-delta · 1 · 3.75 samples per second · 4 samples per second · 2.048 V · ±2.048 V

Hubungi untuk harga

Lihat Datasheet →

MCP3422A0T-E/MC

✅ Masuk Drop-In
📦 8-DFN (2x3)
18-bit resolution and 2.7 V to 5.5 V supply match; the T-qualified family variant differs in qualification and conversion-mode characteristics

📋 Alternatif rujukan (tidak dalam katalog)

MCP3422A2-E/MC

✅ Masuk Drop-In
Microchip Technology
📦 8-DFN (2x3)
Delta-sigma ADC · 18 bit · 2 differential channels · Differential inputs · 2.7 V to 5.5 V · 2.048 V · Plus or minus 2.048 V · 240 samples per second

Hubungi untuk harga

Lihat Datasheet →

MCP3422A3-E/MC

✅ Masuk Drop-In
Microchip Technology
📦 8-DFN (2x3)
Delta-sigma ADC · 18 bits · 2 channels · Differential · I2C · 2.048 V · -2.048 V to +2.048 V · 2.7 V to 5.5 V

Hubungi untuk harga

Lihat Datasheet →

MCP3422A5T-E/MC

✅ Masuk Drop-In
📦 8-DFN (2x3)
18-bit resolution, dual-input architecture, and 2.7 V to 5.5 V supply match; qualification and conversion-mode details differ

📋 Alternatif rujukan (tidak dalam katalog)

MCP3422A5-E/MC Penilaian maksimum & Ciri-ciri Elektrik

ADC Type Sigma-delta analog-to-digital converter
Pemecahkatan 18 bit
Analog Input Channels 2 inputs
Conversion Rate 3.75 samples/s
Supply Voltage Range 2.7 V to 5.5 V
Digital Interface I2C
Internal Reference Onboard voltage reference
Kemasan 8-DFN, 2 mm x 3 mm
Kiraan Pin 8 pins
Jenis Pemasangan Surface mount
Status RoHS RoHS

Panduan Konfigurasi Pin MCP3422A5-E/MC 8-dfn, 2 mm x 3 mm

Konfigurasi pin untuk MCP3422A5-E/MC (8-dfn, 2 mm x 3 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-dfn, 2 mm x 3 mm untuk MCP3422A5-E/MC

Tiada data garisan pin yang diperoleh untuk MCP3422A5-E/MC.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

MCP3422A5-E/MC patut untuk 6 aplikasis: Precision Temperature Sensing, Industrial Pressure Monitoring, Load Cell and Weighing Systems, Chemical and Environmental Sensors, Battery-Powered Instrumentation, Laboratory Data Acquisition.

📱

Precision Temperature Sensing

The MCP3422A5-E/MC fits low-rate temperature measurement because its 18-bit sigma-delta converter provides high numerical resolution while operating at 3.75 samples/s. Two analog inputs can monitor two temperature channels or one sensor plus a reference channel. The device is commonly placed behind an RTD, thermocouple, or resistive sensor front end, with filtering close to the analog pins. Its onboard reference and I2C interface simplify acquisition, although sensor excitation and input-scaling circuitry remain separate from the ADC.

🏭

Industrial Pressure Monitoring

The MCP3422A5-E/MC is appropriate for slow industrial pressure signals that require more numerical resolution than an 8-bit or 12-bit converter provides. At 3.75 samples/s, the ADC can continuously update a filtered pressure measurement while communicating over I2C to a controller. The dual inputs can serve a pressure sensor and a diagnostic channel. A ratiometric bridge, protection network, and analog filter should be designed to preserve the converter’s effective noise performance.

🏭

Load Cell and Weighing Systems

The 18-bit resolution of the MCP3422A5-E/MC is useful for weighing platforms and load-cell front ends where a small differential voltage represents a relatively small mechanical force. The low 3.75 samples/s conversion rate suits static or slowly changing loads rather than dynamic vibration analysis. An instrumentation-amplifier stage, excitation source, and differential filtering network should precede the ADC, while the I2C interface connects the converter to a display or system controller.

🧩

Chemical and Environmental Sensors

The MCP3422A5-E/MC can digitize slow outputs from electrochemical, gas, conductivity, and environmental sensors without the complexity of a high-rate acquisition system. Its dual inputs permit monitoring a sensing electrode and a reference or auxiliary channel, while 18-bit resolution supports fine-grained numerical measurement. Because these sensors can present high source impedance or millivolt-level signals, the design should use a low-noise amplifier and guarded, filtered routing before conversion.

⚡

Battery-Powered Instrumentation

The MCP3422A5-E/MC supports compact, battery-powered instrumentation because its primary function is low-rate precision acquisition rather than continuous high-speed conversion. The 2.7 V to 5.5 V supply range accommodates common low-voltage rails, and the I2C interface allows measured data to be transferred efficiently to a microcontroller or wireless controller. Duty-cycling the converter and peripheral circuitry can help control average system power when the measured quantity changes slowly.

🖥️

Laboratory Data Acquisition

The MCP3422A5-E/MC is useful in laboratory measurement systems that monitor slowly varying voltages and value high-resolution readings over a narrow bandwidth. Two inputs allow simultaneous use for a DUT measurement and a calibration or monitor channel. The 18-bit resolution and onboard reference simplify the measurement chain, while I2C supports connection to embedded controllers. For faster transient capture, designers should select an ADC with a higher conversion rate rather than accelerating this sigma-delta device beyond its intended operating mode.

What is the MCP3422A5-E/MC?
The MCP3422A5-E/MC is an 18-bit, dual-input sigma-delta analog-to-digital converter with a 3.75 samples/s conversion rate and an I2C interface. According to the Microchip Technology MCP3422 datasheet, the device operates from 2.7 V to 5.5 V, includes an onboard voltage reference, and is offered in an 8-DFN package measuring 2 mm by 3 mm. It is intended for low-rate, precision measurement rather than high-speed waveform acquisition.
What are the key specifications of MCP3422A5-E/MC that engineers should know?
The MCP3422A5-E/MC combines 18-bit resolution, two analog inputs, a 3.75 samples/s conversion rate, and an I2C serial interface. According to the Microchip Technology datasheet, its supply-voltage range is 2.7 V to 5.5 V and the package is an 8-DFN measuring 2 mm by 3 mm. These specifications make the converter most appropriate for slow sensor signals where precision, compact size, and accurate digital readout matter more than rapid sampling.
What is the operating voltage of MCP3422A5-E/MC?
The MCP3422A5-E/MC operates from 2.7 V to 5.5 V. This range supports common 3.3 V and 5 V embedded systems, although the external analog signals must remain within the device’s specified input limits. The manufacturer datasheet identifies the converter as an 18-bit, dual-input sigma-delta ADC with an onboard reference and a 3.75 samples/s conversion rate.
Where can I download the MCP3422A5-E/MC datasheet PDF?
The MCP3422A5-E/MC datasheet PDF can be obtained from the Microchip Technology product documentation or from the verified Microchip datasheet page linked on this product page. The document defines the 18-bit dual-input architecture, 2.7 V to 5.5 V supply range, 3.75 samples/s conversion rate, I2C operation, onboard reference, electrical characteristics, and the 8-DFN 2 mm by 3 mm pin arrangement.
Where can I find the MCP3422A5-E/MC pinout?
The MCP3422A5-E/MC pinout should be taken from the pin-description table and package drawing in the manufacturer datasheet. The component uses an 8-DFN package measuring 2 mm by 3 mm, and its exposed thermal pad must be handled according to the PCB-land-pattern instructions in that document. Use the datasheet pin table when assigning power, ground, analog-input, I2C, and exposed-pad connections.
Is MCP3422A5-E/MC suitable for sensor measurement?
Yes, MCP3422A5-E/MC is suitable for slow sensor measurement because it provides 18-bit resolution, two analog inputs, an onboard reference, and a 3.75 samples/s conversion rate. The sigma-delta architecture is useful for temperature, pressure, chemical, and load-cell signals with limited bandwidth. Input conditioning, filtering, and grounding remain necessary to keep sensor excitation and switching noise outside the measured signal.
Where can I buy MCP3422A5-E/MC online?
Use the “Request a Quote” form on this page to request MCP3422A5-E/MC availability, current commercial terms, and a shipment quotation for the required quantity. The verified part listing identifies the exact 8-DFN, 2 mm by 3 mm package and the full MCP3422A5-E/MC ordering code, helping procurement confirm that the quoted component matches the design rather than a different package or suffix.
What is the current price of MCP3422A5-E/MC?
Current commercial pricing for MCP3422A5-E/MC should be requested through the “Request a Quote” form on this page. The form is linked to the exact 18-bit, dual-input, 8-DFN ordering code, allowing the quotation to reflect the required quantity and current market conditions. Use the exact MPN when evaluating a quotation so that package and suffix differences are not introduced.
What is the lead time and stock status for MCP3422A5-E/MC?
Request the current stock position, minimum order quantity, and lead time for MCP3422A5-E/MC through the “Request a Quote” form on this page. Because inventory and production timing can change, a quotation tied to the exact MCP3422A5-E/MC code is more useful than a generic series statement. Include the required quantity and 8-DFN package designation in the request.
MCP3422A5-E/MC vs MCP3422A0-E/MC: which is better for a precision sensor?
MCP3422A5-E/MC is the better fit when the design specifically calls for the 18-bit, dual-input device operating at 3.75 samples/s. MCP3422A0-E/MC is another 18-bit member of the same DFN family, but its operating mode and conversion behavior must be checked against the sensor’s bandwidth. Both share the MCP3422 product family, so the manufacturer datasheet should determine the appropriate operating mode.
MCP3422A5-E/MC vs MCP3422A3-E/MC: which one should I choose?
Choose MCP3422A5-E/MC when the required conversion rate is 3.75 samples/s and the application is a general precision measurement. MCP3422A3-E/MC is identified as an automotive-related member of the MCP3422 family, making it more relevant when automotive qualification is required. The final decision must also consider input range, operating temperature, conversion mode, and qualification requirements in the manufacturer datasheet.
When should I choose MCP3422A5-E/MC over MCP3422A2-E/MC?
Choose MCP3422A5-E/MC when the product specification calls for the 3.75 samples/s operating point and two analog inputs in an 8-DFN package. Consider MCP3422A2-E/MC when its documented conversion behavior better matches a faster or different acquisition strategy. Both are members of the MCP3422 family, so input range, supply voltage, operating mode, and required conversion latency should be compared before making a final selection.
What is the best drop-in replacement for MCP3422A5-E/MC?
MCP3422A0-E/MC, MCP3422A0T-E/MC, MCP3422A2-E/MC, MCP3422A3-E/MC, and MCP3422A5T-E/MC are same-package MCP3422-family candidates identified by the cross-reference results. A true drop-in decision also requires matching the conversion rate, input configuration, operating mode, electrical limits, and temperature qualification. Review the manufacturer datasheet for every candidate rather than assuming that package equivalence alone guarantees identical behavior.
Can MCP3422A0T-E/MC replace MCP3422A5-E/MC?
MCP3422A0T-E/MC can serve as a PCB-level replacement candidate because it is identified as a close member of the MCP3422 family with the same DFN format. It should not be treated as an unconditional functional substitute until the conversion mode, sample rate, reference behavior, input range, and temperature grade match. Verify those details in the manufacturer datasheet before changing the production BOM.
Is there a Microchip Technology equivalent to MCP3422A5-E/MC?
The closest documented alternatives are other Microchip Technology MCP3422-family members, including MCP3422A0-E/MC, MCP3422A0T-E/MC, MCP3422A2-E/MC, MCP3422A3-E/MC, and MCP3422A5T-E/MC. No verified cross-brand part was identified as an assured pin-to-pin replacement. Use the package-compatible Microchip options first, then verify conversion mode, sample rate, input limits, qualification, and supply requirements in the manufacturer datasheet.

Data referensi kejuruteraan untuk MCP3422A5-E/MC — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose MCP3422A5-E/MC when the design needs an 18-bit, dual-input sigma-delta ADC operating at 3.75 samples/s from a 2.7 V to 5.5 V supply, especially for compact temperature, pressure, chemical, or weighing systems. Its onboard reference and I2C interface reduce the external component and wiring burden. Consider MCP3422A0-E/MC or MCP3422A0T-E/MC when their documented conversion mode better matches a single-shot or acquisition strategy. Choose MCP3422A2-E/MC or MCP3422A3-E/MC when their conversion behavior or qualification aligns more closely with the design; the A3 member is particularly relevant to automotive-oriented requirements. MCP3422A5T-E/MC is the closest family option, but its qualification and operating-mode details must be checked before substitution. For any replacement, verify the analog input mode, input range, filter settling time, electrical limits, temperature grade, and exposed-pad layout in the manufacturer datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini MCP3422A0-E/MC MCP3422A0T-E/MC MCP3422A2-E/MC MCP3422A3-E/MC MCP3422A5T-E/MC
Package 8-DFN (2x3) 8-DFN (2x3) 8-DFN (2x3) 8-DFN (2x3) 8-DFN (2x3) 8-DFN (2x3)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution 18 bit 18 bit 18 bit 18 bit 18 bit 18 bit
Converter Architecture Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta Sigma-delta
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Digital Interface I2C I2C I2C I2C I2C I2C

Penyeberangsung Jelas

  • High numerical resolution in a compact dual-input converter (vsMCP3422A3-E/MC)
  • Dual analog inputs reduce measurement-channel component count (vsMCP3422A0-E/MC)
  • Compact 8-DFN footprint supports space-constrained sensor assemblies (vsMCP3422A2-E/MC)
  • Onboard reference supports a compact measurement architecture (vsMCP3422A5T-E/MC)

Catatan Desain

Place the MCP3422A5-E/MC close to the sensor front end and route both analog inputs as short, matched paths. Keep the exposed pad connection consistent with the manufacturer land-pattern guidance. Separate the analog input region from I2C clock and data routing where practical, and provide a quiet ground return for the converter and reference circuitry to minimize coupling from digital switching activity.

Use the input-network topology and capacitor values specified in the manufacturer datasheet for the selected source impedance. Sensor signals are often small and slow, making leakage, offset, and resistor mismatch more important than wideband timing. Verify the source impedance against the converter’s sampling network before adding large filter capacitors, because excessive capacitance can affect settling and conversion accuracy.

Do not treat the 18-bit resolution as a guarantee of 18 bits of useful accuracy. Overall error also depends on the reference, analog front end, noise, calibration, layout, and operating mode. Confirm the differential or single-ended input configuration, conversion mode, digital filter settling time, and output data format in the manufacturer datasheet before writing firmware or calculating scaling.

Decouple the 2.7 V to 5.5 V supply close to the device and connect the exposed pad as directed by the package drawing. Keep sensor excitation currents and regulator switching loops away from the analog return path. For battery-powered equipment, account for both the converter operating current and the external front end because analog amplifiers, references, and filters may dominate the total system demand.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The verified product listing identifies the MCP3422A5-E/MC as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

MCP3422A5-E/MC datasheet MCP3422A5-E/MC pinout MCP3422A5-E/MC specifications MCP3422A5 18 bit ADC MCP3422A5 dual input ADC MCP3422A5 I2C converter MCP3422A5 8-DFN pinout MCP3422A5-E/MC equivalent MCP3422A5-E/MC replacement MCP3422A5-E/MC vs MCP3422A3-E/MC MCP3422A5-E/MC application circuit MCP3422A5-E/MC price MCP3422A5-E/MC stock Microchip MCP3422A5-E/MC

Komponen dan Tanda berkaitan

Microchip Technology MCP3422A5-E/MC MCP3422A0-E/MC MCP3422A0T-E/MC MCP3422A2-E/MC MCP3422A3-E/MC MCP3422A5T-E/MC MCP3422 series analog-to-digital converter ADC sigma-delta converter data converter semiconductor 18-bit resolution dual analog input I2C onboard voltage reference 3.75 samples/s 2.7 V to 5.5 V supply 8-DFN package DFN family surface-mount package precision measurement RoHS
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ