AT91FR4042-CI-T - 75MHz ARM7 MCU | Microchip Technology
MPN: AT91FR4042-CI-T ✗ End of LifeAT91FR4042-CI-T Overview
A microcontroller is a programmable semiconductor system that integrates a processor core, memory, and peripherals on one die. Within the broader semiconductor hierarchy, this device belongs to the embedded-microcontroller and power-management-IC categories. An embedded microcontroller is commonly used to read inputs, execute control logic, manage communications, and operate actuators without requiring a separate general-purpose computer. The AT91FR4042-CI-T specifically combines an ARM7 processor core with embedded Flash and SRAM in a single 121-ball BGA package.
The principal device characteristics visible in the manufacturer documentation are a 75 MHz clock rate, 512 KB of Flash organized as 256K x 16, 256 KB of SRAM organized as 256K x 8, and ARM7 16/32-bit processing. The integrated Flash die is identified as the AT49BV4096A 4-Mbit device. Address, data, and control signals are internally interconnected, with the Flash memory enable treated separately, reducing the external component count required around the processor.
The processor implements the ARM Thumb instruction set and supports an ICE debug port on dedicated pins. This architecture combines a 32-bit ARM7 processor core with more compact Thumb code execution, allowing firmware to use the processor efficiently in embedded control systems. The dedicated debug interface also supports target debugging through the ICE port rather than requiring all debug signals to be multiplexed onto general-purpose pins.
Typical applications include industrial automation controllers, networked embedded equipment, data-acquisition systems, communication gateways, and compact control platforms that require deterministic real-time behavior. The integrated Flash and SRAM make the device suitable for systems that need resident firmware, working memory, and external peripheral connectivity without separate memory packages. Its 10 x 10 mm BGA footprint is appropriate for multilayer PCB designs with careful ball assignment and controlled manufacturing processes.
The principal design consideration is PCB implementation. A 121-ball BGA requires via-in-pad or blind-via structures, adequate solder mask and paste control, and inspection capable of detecting solder-joint defects. Power, clock, ground, and signal routing must follow the pin-description and recommended-layout material in the manufacturer datasheet. Firmware integration should also account for the device’s startup, debug, peripheral, and memory-access behavior before production hardware is released.
This product record combines the device’s core architecture, memory organization, package information, application guidance, and documented design constraints. It also separates exact ordering information from procurement actions by directing buyers to the Request a Quote form for current commercial terms and lead-time confirmation.
Drop-in alternatives for AT91FR4042-CI-T — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with AT91FR4042-CI-T (same form factor and footprint) — differing in Mounting Type, Package.
No drop-in alternatives available for this product.
Request AlternativesAT91FR4042-CI-T Maximum Ratings & Electrical Characteristics
| Product Type | ARM7 16/32-bit embedded microcontroller |
| Processor Core | AT91R40008 ARM Thumb processor |
| Operating Frequency | 75 MHz |
| Flash Memory | 512 KB, 256K x 16 |
| RAM Memory | 256 KB, 256K x 8 |
| Integrated Flash Die | AT49BV4096A, 4 Mbit |
| Instruction Set | ARM Thumb |
| Word Architecture | 16/32-bit |
| Package | 121-ball BGA, 10 x 10 mm |
| Ball Count | 121 balls |
| Mounting Type | Surface-mount BGA |
| Debug Interface | ICE port on dedicated pins |
| Internal Interconnection | Address, data, and control signals internally interconnected |
AT91FR4042-CI-T 121-ball bga, 10 x 10 mm Pin Configuration Guide
Pin configuration for AT91FR4042-CI-T (121-ball bga, 10 x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for AT91FR4042-CI-T.
Refer to the datasheet for full pin configuration.
Typical Applications
AT91FR4042-CI-T is suitable for 6 applications: Industrial Automation Controller, Data-Acquisition and Monitoring System, Communication Gateway, Embedded Equipment Controller, Networked Smart-Device Control Node, Real-Time Control Platform.
Industrial Automation Controller
The AT91FR4042-CI-T is suitable for a compact automation controller whose deterministic firmware must execute at 75 MHz while retaining 512 KB of Flash program memory and 256 KB of RAM. The ARM Thumb processor can support sequencing logic, state-machine control, data acquisition, and supervisory communications without separate program-memory devices. Its 121-ball BGA package also allows a multilayer control board to combine the processor, regulated supplies, interface transceivers, and expansion connectors. Before selecting it, verify the required peripheral set, I/O count, electrical limits, and environmental rating against the manufacturer datasheet. A legacy AT91-based production platform that already uses this device can preserve its mechanical and firmware architecture while avoiding an unnecessary controller redesign.
Data-Acquisition and Monitoring System
The AT91FR4042-CI-T can serve as the central embedded processor in a monitoring system that samples inputs, evaluates thresholds, records events, and reports results through an available communication peripheral. Its 75 MHz ARM7 processing rate provides headroom for interrupt handling and control software, while 256 KB of RAM supports working buffers and 512 KB of Flash holds resident firmware. The dedicated ICE port assists commissioning and fault diagnosis without occupying general-purpose I/O pins. Because the available product description does not enumerate converters, counters, or interface standards, engineers should confirm the required peripheral functions before schematic capture. The 10 x 10 mm BGA is particularly useful where board area is constrained and multilayer assembly capability is already established.
Communication Gateway
The AT91FR4042-CI-T is appropriate for a communication gateway that must maintain protocol state, buffer inbound and outbound data, and coordinate multiple external interfaces. The 75 MHz ARM Thumb core is appropriate for protocol parsing and event-driven control, while the integrated 512 KB Flash and 256 KB RAM separate resident firmware from temporary data handling. Most processor address, data, and control signals are internally interconnected, leaving the board designer to focus on external transceivers, connectors, isolation, and signal conditioning. The ICE port on dedicated pins provides a direct debugging path for protocol and timing investigations. Confirm the exact USART, SPI, or other interface availability, pin multiplexing, and operating conditions in the manufacturer documentation before treating the gateway design as released.
Embedded Equipment Controller
For embedded equipment requiring substantial firmware and real-time control, the AT91FR4042-CI-T combines a 75 MHz ARM7 processor, 512 KB of Flash, and 256 KB of RAM in one 121-ball BGA package. The Flash configuration supports a larger resident program than many compact microcontroller variants, while the RAM permits more active buffering and state management. An equipment controller can use the MCU for panel handling, sensor coordination, actuator timing, fault logging, and communications management. The integrated AT49BV4096A 4-Mbit Flash die also reduces the need for a separate program-memory package. Validate the required peripheral mix, pin multiplexing, brownout behavior, and recovery functions in the datasheet, and plan the PCB for controlled BGA assembly and inspection.
Networked Smart-Device Control Node
The AT91FR4042-CI-T can form the control node of a networked smart device when a legacy ARM7 implementation is preferred over a newer architecture. Its 75 MHz ARM Thumb core handles local control logic, 512 KB of Flash stores application firmware, and 256 KB of RAM supports communication buffers and device state. The dedicated ICE port helps validate protocol handling, timing, and fault recovery during development. Integration at 10 x 10 mm makes the controller practical for compact equipment with multilayer PCB assembly capability. The exact network-interface options and peripheral assignments must be checked in the manufacturer documentation, because they determine which external transceiver and connector components are required. A field update strategy should also account for Flash endurance and safe firmware recovery.
Real-Time Control Platform
The AT91FR4042-CI-T is a viable real-time control platform when the product requires the established AT91R40008 ARM Thumb architecture rather than a general-purpose MCU family. The 75 MHz core can execute time-critical routines and service asynchronous events, while 512 KB of Flash and 256 KB of RAM provide dedicated program and working-memory resources. A dedicated ICE port makes low-level debugging practical during algorithm bring-up and production test. Possible uses include motion controllers, test equipment, and embedded machinery, subject to confirmation of the required timers, interrupts, I/O standards, and environmental limits. The 121-ball BGA supports dense board layouts but demands qualified assembly processes, via-in-pad review, paste-volume control, and inspection plans before volume production.
Engineering reference data for AT91FR4042-CI-T — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Microchip Technology |
| Package | 121-ball BGA, 10 x 10 mm |
| Processor Core | AT91R40008 ARM Thumb processor |
| Operating Frequency | 75 MHz |
| Flash Memory | 512 KB, 256K x 16 |
| RAM Memory | 256 KB, 256K x 8 |
| Word Architecture | 16/32-bit |
| Debug Interface | ICE port on dedicated pins |
| Integrated Flash Die | AT49BV4096A, 4 Mbit |
Key Differentiators
- Integrated processor and Flash implementation (vs AT91FR4042-CI)
- Integrated 4-Mbit Flash die (vs External-memory ARM7 controller designs)
- Dedicated hardware debug access (vs MCUs without a dedicated ICE port)
Design Notes
Treat the 121-ball BGA as a controlled assembly technology rather than a conventional leaded package. Derive copper, solder mask, and paste apertures from the manufacturer land-pattern drawings, and qualify via-in-pad or filled-via construction when required by the assembly method. Control solder-paste volume to avoid bridging between the closely spaced balls, then define inspection coverage for hidden joints under the component.
Assign power, ground, clock, reset, and debug balls exactly as directed by the manufacturer pin-description and recommended-layout material. Keep the clock path short and continuous, place bypass connections at the relevant supply pins using the datasheet network, and route sensitive inputs away from fast digital and switching nodes. Perform a final ball-by-ball netlist comparison before fabrication release.
Do not treat the AT91FR4042-CI and AT91FR4042-CI-T ordering strings as automatically interchangeable without checking the complete suffix table. Similarly, a 75 MHz ARM7 MCU with 512 KB of Flash is not necessarily a drop-in substitute because peripherals, ball assignments, voltage limits, and software behavior may differ. Record the exact ordering code and verify it against the approved BOM and manufacturer documentation.
Compliance Information
The available product documentation excerpts do not state the device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.