LM324MWA - Quad 1.2MHz Op Amp | Texas Instruments
MPN: LM324MWA ✓ ActiveLM324MWA Overview
An operational amplifier is an analog signal-processing IC that compares voltages applied to its high- and low-impedance input terminals and amplifies the difference between them. The LM324 belongs to the operational-amplifier hierarchy, where it is a low-power, general-purpose quad amplifier intended for inexpensive, broadly applicable analog circuits. Four independent channels on one die allow a designer to implement four amplifier functions without using four separate packages.
The defining feature of LM324MWA is its combination of four channels, internal frequency compensation, and single-supply operation. Because compensation is integrated into each amplifier, external compensation components are not required for the device's normal operation. Its 1.2 MHz gain-bandwidth figure identifies it as a general-purpose, moderate-bandwidth amplifier rather than a high-speed precision device. The wide supply-voltage range specified for the LM324 family supports use across systems whose rail voltage may vary.
The MWA suffix denotes a wafer-sale configuration, so the delivered item is bare semiconductor die instead of a finished, pin-encapsulated IC. Its terminal form and package code are therefore not equivalent to a conventional DIP or surface-mount package. This form can be useful to specialized manufacturers that perform die inspection, wafer-level processing, custom packaging, or multi-die module assembly. It is not intended for direct soldering onto a conventional printed circuit board without an appropriate assembly process.
Typical uses for the LM324 family include low-frequency signal conditioning, transducers, sensor interfaces, audio and control circuits, and general instrumentation. Four independent sections can handle several small-signal functions within one device, reducing component count when a system does not require the low noise, high speed, or precision associated with more specialized amplifiers. System designers must also account for the limitations inherent in a general-purpose internally compensated amplifier.
The primary design consideration is that wafer supply requires a defined die-handling and packaging strategy. Pin assignment, bonding, inspection criteria, and long-term reliability requirements should be confirmed with Texas Instruments before volume assembly. If the application requires a directly mountable component with established outlines, lead pitch, and thermal behavior, a packaged LM324 orderable part is generally easier to integrate and qualify.
This page combines the manufacturer product description, distributor package information, and the supplied cross-reference results with application guidance specific to an unpackaged quad op-amp die. It also distinguishes the wafer-sale format from conventional LM324 package variants and documents which engineering facts require confirmation before custom manufacturing.
Drop-in alternatives for LM324MWA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesLM324MWA Maximum Ratings & Electrical Characteristics
| Product Type | Quad general-purpose operational amplifier |
| Number of Amplifiers | 4 circuits |
| Channel Architecture | 4 independent amplifiers |
| Gain-Bandwidth Product | 1.2 MHz |
| Supply Configuration | Single supply |
| Frequency Compensation | Internally frequency compensated |
| Package Form | Wafer sale |
| Terminal Form | No-lead die; package code DIE |
LM324MWA wafer sale Pin Configuration Guide
Pin configuration for LM324MWA (wafer sale package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for LM324MWA.
Refer to the datasheet for full pin configuration.
Typical Applications
LM324MWA is suitable for 6 applications: Industrial Sensor Signal Conditioning, Audio Preamplifier Module, Custom Analog IC Module, Control System Interface, Battery-Powered Instrumentation, Test and Measurement Front End.
Industrial Sensor Signal Conditioning
The LM324MWA can support low-frequency sensor-conditioning channels when the product is integrated through a custom wafer-level packaging process. Four independent, internally frequency-compensated amplifiers provide a practical way to combine amplification, buffering, and basic active filtering on one die. The 1.2 MHz gain-bandwidth product is appropriate for many process-control and instrumentation signals, but the custom assembly plan must establish die pads, bonding, inspection, and environmental reliability. Because LM324MWA is sold as bare die, its value lies in reducing the number of amplifier dies needed by a specialized module rather than simplifying a conventional PCB layout.
Audio Preamplifier Module
The four independent LM324MWA channels can be allocated to low-level audio preamplification, impedance buffering, and mixed-signal conditioning within a custom multi-die audio module. Internal frequency compensation simplifies each channel, and the 1.2 MHz gain-bandwidth product covers many audio-band tasks when gain and noise requirements remain moderate. A wafer-level implementation can reduce package count compared with separate single amplifiers. The engineering trade-off is that bare-die assembly requires defined bonding, thermal analysis, contamination control, and test access before the module can be assembled reliably.
Custom Analog IC Module
LM324MWA is relevant to designers creating a custom analog module that needs four general-purpose amplifier functions on one semiconductor die. Combining the channels can simplify interconnections within a multi-die or heterogeneous package and can reduce assembly steps compared with four separately packaged amplifiers. The internal compensation and 1.2 MHz gain-bandwidth product suit low- and moderate-frequency functions. Before committing the design, engineers should obtain the manufacturer die information and define the bonding map, pad geometry, test strategy, and heat-dissipation path required to turn the wafer into a qualified component.
Control System Interface
The LM324MWA channels can be used in custom control-system interfaces for buffering sensor outputs, amplifying error signals, or driving control inputs within their specified operating range. Four independent sections allow several low-frequency signal paths to coexist on one die, while internal frequency compensation keeps each amplifier implementation straightforward. The device should not be treated as a high-speed precision part merely because it is a quad amplifier; loop bandwidth, output swing, input range, and channel matching must be checked against the control architecture. Wafer-level manufacturing and qualification remain the principal implementation constraints.
Battery-Powered Instrumentation
A custom instrumentation module can use the LM324MWA's low-power, general-purpose quad-amplifier architecture for low-frequency measurements from resistive, capacitive, or contact-based sensors. Running four amplifier channels from a single supply supports compact power architecture and can reduce the number of separate die assemblies in a specialized product. The wide single-supply operating range provides flexibility across internal rails, while the 1.2 MHz gain-bandwidth product is generally adequate for slow sensor signals. Designers must verify actual supply current, input common-mode limits, output swing, and noise performance for their operating point before finalizing the circuit.
Test and Measurement Front End
The LM324MWA can serve as the amplifier element in a custom measurement front end containing four independent channels for buffering or fixed-gain amplification. Its general-purpose design and 1.2 MHz gain-bandwidth product fit instrumentation that handles moderate-bandwidth signals rather than precision millivolt measurements or high-speed acquisition. Using the die in a custom package can support dense multi-channel instrumentation, but calibration access, leakage, channel-to-channel variation, and temperature drift must be included in system qualification. The manufacturer die and assembly information should be reviewed before creating production bonding fixtures.
Engineering reference data for LM324MWA — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Texas Instruments |
| Package | Wafer sale, DIE package code |
| Product Type | Quad general-purpose operational amplifier |
| Number of Amplifiers | 4 independent amplifiers |
| Gain-Bandwidth Product | 1.2 MHz |
| Supply Configuration | Single supply |
| Frequency Compensation | Internal |
| Temperature Grade | Industrial |
| Terminal Form | No-lead die |
| Programmable Power | No |
Key Differentiators
- Wafer-sale integration opportunity (vs Packaged LM324 orderable parts)
- Four-channel functional consolidation (vs Single-package general-purpose op amps)
- General-purpose single-supply architecture (vs Precision or high-speed amplifier families)
Design Notes
Do not treat LM324MWA as a conventional PCB-mount IC. It is a wafer-sale item with no finished package outline, lead pitch, or standard solderable land pattern. A design that assumes DIP, SOIC, or another packaged footprint will fail mechanically and electrically. Obtain the released die-pad and bonding information from Texas Instruments, then create the package, footprint, pinout, and assembly fixtures from those controlled manufacturing records.
Plan the custom package or multi-die module before final PCB layout. The bonding map must connect each amplifier's supply, ground, inputs, and output to package pads with an electrical design that respects input common-mode range, output swing, stability, and decoupling. Place the package-level supply bypass capacitors close to the amplifier supply pins after the die-to-pad assignments are known; do not infer a conventional LM324 pinout from a packaged variant.
Wafer-level assembly changes the thermal path compared with a molded package. Validate the intended custom package or module under worst-case ambient temperature, channel activity, and bias conditions. Check each amplifier channel for sustained output current and simultaneous operation rather than assuming that four channels dissipate independently. Manufacturing qualification should include temperature cycling, power cycling, and electrical performance verification after bonding and encapsulation.
Use stable reference or feedback networks because the LM324 family is a general-purpose, internally compensated amplifier with a 1.2 MHz gain-bandwidth product. Keep external feedback traces short, provide adequate bypassing at the package supply pins, and avoid routing sensitive inputs beside high-current outputs. Evaluate settling, output drive, and noise against the actual source impedance and required signal bandwidth before production release.
Compliance Information
The wafer-sale form is not a finished electronic component, so package-level lead-free and halogen-free declarations cannot be inferred. AEC-Q100 is not applicable to the identified general-purpose LM324MWA wafer configuration. Compliance and environmental declarations should be confirmed for the specific die, wafer, assembly, and customer packaging.