NXP Semiconductors

LPC2106FHN48 - 60MHz ARM7 MCU, 128KB Flash | NXP

MPN: LPC2106FHN48 ✓ Active
48-HVQFN, 7 x 7 mm Package 60 MHz Speed 128 kB Memory
MOQ: 1 |

LPC2106FHN48 Overview

NXP Semiconductors LPC2106FHN48 is a 32-bit ARM7TDMI-S microcontroller with a 60 MHz CPU, 128 kB of embedded ISP/IAP flash memory, and 64 kB of RAM in a 48-pin HVQFN package measuring 7 x 7 mm. It integrates two UARTs, I2C, SPI, 32 general-purpose I/O ports, timers, and an ARM7TDMI-S core with real-time emulation and embedded trace support.

A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripheral interfaces on one integrated circuit. Within the embedded-device hierarchy, the LPC2106 belongs to the 32-bit microcontroller category and uses an ARM7 architecture rather than an 8- or 16-bit processor architecture. Its combination of embedded flash, RAM, serial interfaces, and deterministic control peripherals makes it suitable for compact embedded control and communication systems.

The LPC2106FHN48 provides 128 kB of high-speed embedded flash for program storage and 64 kB of RAM for working memory. Two UART interfaces support serial data exchange, while I2C and SPI expand the device's connection to sensors, converters, transceivers, and external nonvolatile storage. Its 32 I/O ports provide parallel digital connectivity for control signals, status indicators, and external logic.

The ARM7TDMI-S processor includes real-time emulation and embedded trace capabilities, allowing developers to observe execution behavior during firmware development. Its 60 MHz operating frequency supports interrupt-driven control loops and protocol handling without requiring a separate CPU. Depending on the ordering suffix, the operating-temperature qualification may differ; confirm the exact suffix before beginning a production design.

Typical applications include industrial monitoring equipment, building-control modules, serial gateways, data loggers, instrument interfaces, and embedded communications controllers. The two UARTs can connect the MCU to host processors or external modems, while SPI and I2C suit higher-speed peripherals and low-speed sensors. The 7 x 7 mm package also supports compact control boards where board area is constrained.

PCB implementation should preserve the manufacturer's recommended power, decoupling, clock, and exposed-pad connections. The 48-pin HVQFN footprint requires careful assembly planning and thermal-pad soldering to achieve reliable electrical and thermal performance. Use the LPC2104, LPC2105, and LPC2106 datasheet when validating pin assignments, startup behavior, and peripheral multiplexing.

This product page combines the manufacturer architecture and ordering information with practical selection guidance, package details, application context, and a structured review of same-family drop-in alternatives. It is intended to help engineers determine whether the LPC2106FHN48 fits the required memory, interface, package, and environmental constraints before layout and firmware development.

Drop-in alternatives for LPC2106FHN48 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LPC2106FHN48 (same form factor and footprint) — differing in CPU Architecture, I2C Interface, Package, Product Type, SPI Interface.

NXP Semiconductors
CPU Architecture: ARM7TDMI-S with ARM and Thumb instruction support
I2C Interface: 1 interface
Package: 48-HVQFN, 7 mm x 7 mm

LPC2106FHN48/01

✅ Drop-In ⚠️ Specs Unverified
NXP Semiconductors
📦 48-HVQFN, 7 x 7 mm
32-bit ARM7TDMI-S microcontroller · 60 MHz · ARM7TDMI-S with ARM and Thumb instruction support · 128 KB ISP/IAP Flash · 64 KB · 128 bit · 2 · 1 interface

Contact for price

View Datasheet →

LPC2106FHN48,551

✅ Drop-In
📦 48-HVQFN, 7 x 7 mm
Same LPC2106 package and memory configuration; the ,551 qualification suffix differs from the base ordering code, with 0% stated CPU-frequency difference.

📋 Reference alternative (not in catalog)

LPC2106FHN48/01,55

✅ Drop-In
📦 48-HVQFN, 7 x 7 mm
Same 48-HVQFN footprint and 60 MHz LPC2106 configuration; /01,55 adds a suffix-specific qualification option, with 0% core-frequency difference.

📋 Reference alternative (not in catalog)

LPC2106FHN48/01551

✅ Drop-In
📦 48-HVQFN, 7 x 7 mm
Same LPC2106 family and 48-HVQFN land pattern; /01551 uses an extended ordering code, with 0% difference in the stated 60 MHz processor rating.

📋 Reference alternative (not in catalog)

LPC2106FHN48/00

✅ Drop-In ⚠️ Specs Unverified
📦 48-HVQFN, 7 x 7 mm
Same LPC2106 core, memory, and 48-HVQFN footprint; /00 differs as a feature-version suffix, with 0% difference in maximum stated CPU frequency.

📋 Reference alternative (not in catalog)

LPC2106FHN48 Maximum Ratings & Electrical Characteristics

Product Type 32-bit ARM microcontroller
CPU Core ARM7TDMI-S
CPU Architecture ARM7, 16/32-bit
Maximum CPU Frequency 60 MHz
Embedded Flash Memory 128 kB
Flash Programming ISP/IAP
RAM 64 kB
UART Interfaces 2
I2C Interface 1
SPI Interface 1
General-Purpose I/O Ports 32
Package 48-HVQFN, 7 x 7 mm
Pin Count 48 pins
Mounting Type Surface mount
Core Debug Features Real-time emulation and embedded trace
RoHS Status unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

LPC2106FHN48 48-hvqfn, 7 x 7 mm Pin Configuration Guide

Pin configuration for LPC2106FHN48 (48-hvqfn, 7 x 7 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

48-hvqfn, 7 x 7 mm package pinout diagram for LPC2106FHN48

No detailed pinout data available for LPC2106FHN48.

Refer to the datasheet for full pin configuration.

Typical Applications

LPC2106FHN48 is suitable for 6 applications: Industrial Serial Gateway, Building Control Module, Data Logger, Sensor and Instrumentation Hub, Embedded Communications Controller, Digital Control Panel.

🏭

Industrial Serial Gateway

The LPC2106FHN48 fits an industrial serial gateway because its ARM7TDMI-S core runs at up to 60 MHz while providing 128 kB of embedded flash and 64 kB of RAM for protocol handling. Its two UARTs can support independent host and field-device links, and SPI or I2C can connect local sensors, memory, or configuration devices. The 48-HVQFN package measures 7 x 7 mm, helping reduce board area in compact DIN-rail or panel-mounted gateways. Firmware can use UART interrupt handling for frame assembly while SPI serves a faster local peripheral. The exact ordering suffix must be checked against the gateway's ambient-temperature and qualification requirements before production release.

🏠

Building Control Module

The LPC2106FHN48 is appropriate for a distributed building-control module that must combine protocol handling with digital I/O. Its 32 I/O ports can support relays, status inputs, and logic-level control signals, while the 60 MHz ARM7TDMI-S processor provides adequate response time for scheduled control tasks and communications. Two UARTs allow connection to a controller and field service interface, while I2C and SPI can serve sensors, memory, or an expansion interface. The 128 kB embedded flash supports a bootloader and application, and the 64 kB RAM permits protocol buffers. Use the manufacturer pin table to resolve peripheral multiplexing and verify the required suffix for the installation environment.

📟

Data Logger

The LPC2106FHN48 can serve as the local controller in a data logger because it combines 64 kB of RAM, 128 kB of ISP/IAP flash, and multiple communication interfaces in a compact package. A sensor board can connect through SPI or I2C, while the two UARTs can move records to a host computer or wireless module. The 32 GPIO pins support card insertion, status indication, and external triggers. Its 60 MHz clock leaves processing headroom for buffering, timestamps, and protocol conversion before storage. The low pin-count 7 x 7 mm HVQFN also leaves room for memory and power components, but exposed-pad soldering and the complete power network must follow the NXP layout guidance.

🧩

Sensor and Instrumentation Hub

The LPC2106FHN48 works well as a sensor and instrumentation hub when a design needs flexible serial connectivity in a small board area. The 60 MHz ARM7TDMI-S core can sample inputs, filter readings, and coordinate sensors connected through I2C or SPI. Its two UARTs support a host computer, calibration interface, or external communication link, while 32 GPIO pins handle enables, alarms, and digital sensor channels. The 128 kB flash stores firmware and calibration tables, and 64 kB RAM supports working buffers. Because several peripheral functions share pins, engineers should assign signals from the NXP connection table rather than infer them solely from the package drawing.

🌐

Embedded Communications Controller

The LPC2106FHN48 is suitable for an embedded communications controller because it combines two UARTs with SPI and I2C in a 32-bit microcontroller. The processor can manage buffering, framing, routing, and status logic at 60 MHz, while the 128 kB flash supports application firmware and the 64 kB RAM accommodates receive and transmit queues. A communications module can sit on SPI for higher-throughput data, and a host or service interface can use a UART. Its 48-HVQFN package supports compact control hardware without requiring a large through-hole footprint. Firmware and pin multiplexing should be validated against the exact LPC2106 suffix and the manufacturer's package and electrical guidance.

🎛️

Digital Control Panel

The LPC2106FHN48 can support a digital control panel that combines local logic, serial configuration, and programmable I/O. Its 32 GPIO ports are useful for push-button inputs, indicator control, relay logic, and interface isolation, while I2C can connect a display or sensor and SPI can provide access to a higher-speed device. The 60 MHz processor supports responsive event handling, and 128 kB of embedded flash is useful for storing panel configuration logic or a bootloader. The 7 x 7 mm HVQFN helps maintain a compact panel controller layout. Because multifunction pins can change according to peripheral selection, validate every routed signal against the manufacturer datasheet and confirm the ordering suffix used for production.

Recommended Products Summary

LPC2106FHN48 NXP Semiconductors Used in: Industrial Serial Gateway, Building Control Module, Data Logger, Sensor and Instrumentation Hub, Embedded Communications Controller, Digital Control Panel LPC2104 Same-family low-memory controller Used in: Industrial Serial Gateway, Data Logger LPC2105 Same-family controller Used in: Industrial Serial Gateway, Building Control Module, Digital Control Panel LPC2106FHN48/01,55 Suffix-qualified family option Used in: Sensor and Instrumentation Hub LPC2106FHN48,551 Same-family ordering option Used in: Embedded Communications Controller
What are the key specifications of LPC2106FHN48 that engineers should know?
The LPC2106FHN48 combines a 60 MHz ARM7TDMI-S CPU, 128 kB of embedded ISP/IAP flash, 64 kB of RAM, and 32 I/O ports in a 48-HVQFN package. According to the NXP LPC2104/2105/2106 datasheet, the device also provides two UART interfaces, one I2C interface, and one SPI interface. These resources make it suitable for embedded controllers that need local program storage and several serial peripheral connections within a compact 7 x 7 mm footprint.
What is the LPC2106FHN48 and what does it do?
The LPC2106FHN48 is a 32-bit ARM7TDMI-S microcontroller designed for embedded control and communications. It operates at up to 60 MHz and combines 128 kB of ISP/IAP flash with 64 kB of RAM. According to the NXP product page, the processor provides real-time emulation and embedded trace support, while the integrated two UARTs, I2C, SPI, and 32 I/O ports enable connection to sensors, converters, and external communication equipment.
Where can I download the LPC2106FHN48 datasheet PDF?
The LPC2106FHN48 datasheet PDF is available from NXP through the official LPC2104, LPC2105, and LPC2106 datasheet link on this page. According to NXP, that document covers the shared microcontroller family and explains the suffix differences used to identify feature variants. Use the manufacturer document when assigning every 48-pin HVQFN connection and when validating electrical limits, package dimensions, and peripheral multiplexing.
Where can I find the LPC2106FHN48 pinout?
The authoritative LPC2106FHN48 pinout is shown in the pin-connection table of the NXP LPC2104/2105/2106 manufacturer datasheet. The component uses a 48-HVQFN, 7 x 7 mm package with an exposed thermal pad. Use the datasheet pin-description and package drawings when assigning PCB tracks because some multifunction signals are shared among GPIO, timer, UART, SPI, I2C, and debug functions.
What is the difference between LPC2106FHN48 and LPC2106FHN48/01?
Both identifiers identify the LPC2106 in a 48-HVQFN package, and the LPC2106 family data identifies a 60 MHz ARM7TDMI-S core with 128 kB of embedded flash. Their ordering suffix determines the exact device qualification, so the suffix must be checked against the required environmental and feature conditions before substitution. According to NXP, suffix codes are used to differentiate devices when they include new features, making the complete ordering code essential.
Can LPC2106FHN48/01,55 replace LPC2106FHN48 in an existing design?
LPC2106FHN48/01,55 is a same-family candidate for replacement only after the PCB and qualification requirements are checked. Both parts use the 48-HVQFN package and belong to the LPC2106 family, so the footprint can match, but suffix-specific temperature, feature, or qualification requirements may differ. According to NXP, suffixes differentiate devices whenever they include new features. Confirm the exact suffix requirements and errata before approving a production substitution.
When should I choose LPC2106FHN48 over another LPC2106 ordering option?
Choose LPC2106FHN48 when a design specifically calls for the base LPC2106 device in the 48-HVQFN package with a 60 MHz ARM7TDMI-S core, 128 kB of flash, 64 kB of RAM, and integrated serial interfaces. Select a suffixed LPC2106 option instead when its documented qualification or added feature is required. NXP identifies the LPC2104/2105/2106 family as sharing a common datasheet, but the ordering suffix remains part of the exact device identity.
Is LPC2106FHN48 suitable for an industrial serial gateway?
The LPC2106FHN48 is suitable for a compact serial gateway when 60 MHz processing, 128 kB of program flash, 64 kB of RAM, and three serial interface types meet the design requirements. The two UARTs can support host and radio or modem links, while SPI and I2C can connect local sensors or configuration devices. Confirm the exact ordering suffix's environmental qualification before deployment in an industrial enclosure.
What are the LPC2106FHN48 power supply requirements?
The LPC2106FHN48 uses a low-voltage digital supply, but the exact operating voltage must be taken from the electrical-characteristics table for the selected ordering suffix. According to the NXP manufacturer datasheet, the device also includes dedicated core and I/O supply pins whose permissible ranges and sequencing requirements must be observed. Do not substitute a single voltage value from an unrelated LPC device or distributor summary.
What are the main design considerations for the LPC2106FHN48?
The main design considerations are power integrity, clock stability, exposed-pad soldering, and correct use of multiplexed pins. According to the NXP LPC2104/2105/2106 datasheet, the 48-HVQFN device requires the package's exposed-pad connection and specified power arrangements to operate correctly. Place decoupling capacitors close to their supply pins, follow the recommended crystal or oscillator network, and route each pin according to its selected peripheral function.
How much flash and RAM does LPC2106FHN48 provide?
The LPC2106FHN48 provides 128 kB of embedded high-speed flash and 64 kB of RAM. According to NXP, the flash supports ISP and IAP programming, allowing firmware to be programmed and updated through dedicated serial pathways. The on-chip RAM supports working state and data buffers, while the 128 kB flash stores the application program and persistent bootloader logic.
What serial peripherals are available on LPC2106FHN48?
The LPC2106FHN48 provides two UARTs, one I2C interface, and one SPI interface. According to the NXP LPC2104/2105/2106 family documentation, these interfaces support communication with host systems, sensors, converters, transceivers, and external storage. Their alternate-function signals share package pins with other functions, so the final pin assignment must follow the selected operating mode and the manufacturer pin-connection table.
Where can I buy LPC2106FHN48 and what is its lead time?
Use the Request a Quote form on this page to ask about LPC2106FHN48 availability, current lead time, and minimum order quantity. Because order suffix and quantity determine the exact procurement configuration, request the complete LPC2106FHN48 ordering code and required package quantity in the inquiry. This avoids substitutions between the base part, the /01 variant, and the 55-qualified ordering codes.
How much does LPC2106FHN48 cost?
Use the Request a Quote form on this page for the current LPC2106FHN48 price and quantity-break terms. Pricing can vary with the exact ordering suffix, package quantity, production volume, and market conditions. The form is the appropriate route for a current quotation because the component also appears under multiple LPC2106 ordering identifiers that must not be confused.
Is LPC2106FHN48 currently in stock?
The Request a Quote form on this page provides the current LPC2106FHN48 stock and allocation status for the requested quantity. Include the exact base part number, acceptable suffix, and production quantity in the inquiry. This is especially important for the LPC2106 family because the base device, /01 versions, and 55-qualified ordering codes are distinct line items.
What can replace LPC2106FHN48 on the same 48-HVQFN footprint?
The closest drop-in candidates are same-family LPC2106 ordering variants using the 48-HVQFN footprint, including LPC2106FHN48/01, LPC2106FHN48,551, LPC2106FHN48/01,55, LPC2106FHN48/01551, and LPC2106FHN48/00. According to NXP, suffix codes distinguish devices when they include new features. Verify qualification, temperature, errata, and firmware implications before replacing the exact LPC2106FHN48.

Engineering reference data for LPC2106FHN48 — comparison, design guidance, and compliance information.

Selection Guide

Choose the LPC2106FHN48 when the BOM specifically requires the base LPC2106 ordering code, a 60 MHz ARM7TDMI-S core, 128 kB of embedded ISP/IAP flash, 64 kB of RAM, and a 48-HVQFN footprint. The same-family alternatives share that land pattern and core platform, so they can simplify lifecycle or qualification transitions when their suffix-specific requirements fit the product. Select LPC2106FHN48/01 or LPC2106FHN48/00 when the required feature-version suffix calls for that ordering. Consider LPC2106FHN48,551 or LPC2106FHN48/01,55 when the documented 55 qualification is required, and LPC2106FHN48/01551 when that extended ordering combination matches the device specification. For every substitution, verify the manufacturer datasheet, errata, operating-temperature limits, peripheral multiplexing, and firmware assumptions rather than relying on package matching alone.

Comparison with Alternatives

Parameter This Product LPC2106FHN48/01 LPC2106FHN48,551 LPC2106FHN48/01,55 LPC2106FHN48/01551 LPC2106FHN48/00
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-HVQFN, 7 x 7 mm 48-HVQFN, 7 x 7 mm 48-HVQFN, 7 x 7 mm 48-HVQFN, 7 x 7 mm 48-HVQFN, 7 x 7 mm 48-HVQFN, 7 x 7 mm
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Embedded Flash 128 kB 128 kB 128 kB 128 kB 128 kB 128 kB
RAM 64 kB 64 kB 64 kB 64 kB 64 kB 64 kB
UART Interfaces 2 2 2 2 2 2
Ordering Qualification Base LPC2106FHN48 ordering code /01 feature version ,551 qualification suffix /01 and 55 qualification suffixes /01 and 551 ordering suffixes /00 feature version

Key Differentiators

  • Combines three serial interface types on one microcontroller (vs LPC2106FHN48/01)
  • Provides sufficient embedded memory for local control firmware (vs LPC2106FHN48,551)
  • Compact 48-HVQFN package supports space-constrained designs (vs LPC2106FHN48/01,55)
  • Maintains broad peripheral connectivity for embedded gateways (vs LPC2106FHN48/01551)

Design Notes

Follow the NXP LPC2104/2105/2106 recommended layout for the 48-HVQFN package, including the exposed thermal pad and its via arrangement. Place supply-decoupling capacitors close to the associated package pins, keep the pad connection unobstructed by solder mask, and verify paste coverage and reflow profile for the selected footprint. Also route the oscillator network away from high-speed switching nodes to reduce coupling into the ARM7TDMI-S clock input.

Treat the core supply and I/O supply as separate design constraints. Check the electrical-characteristics table for the exact LPC2106 ordering suffix before selecting regulator set points, and implement the required bypass network at the pins. Provide a clean startup ramp, observe all supply sequencing limits, and avoid routing return current through the exposed-pad connection in a way that destabilizes sensitive analog or communication nodes.

Do not treat LPC2106FHN48, LPC2106FHN48/01, and 55-qualified ordering codes as interchangeable solely because they share the 48-HVQFN footprint. NXP uses suffixes to distinguish devices when new features are included. Before substitution, verify the complete ordering code, temperature grade, qualification, errata, and pin-function changes. Also avoid using a summary that states a different clock rating than the exact manufacturer table for the selected suffix.

Resolve every multiplexed GPIO, UART, SPI, I2C, timer, and debug assignment before routing the PCB. Place the 60 MHz crystal or oscillator close to the clock pins, provide a solid ground reference, and keep switching or high-current traces away from communication and sensor inputs. Although the device has 32 I/O ports, the package also carries power, clock, programming, and debug functions, so pin availability depends on the active peripheral configuration.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance declarations for the exact LPC2106FHN48 ordering suffix were not identified. Use the current NXP product declaration or manufacturer compliance documentation before release.

Data verified on: 2026-11-15 — data verified and curated by XAIPART's component engineering team

Related Searches

LPC2106FHN48 datasheet LPC2106FHN48 datasheet pdf LPC2106FHN48 pinout LPC2106FHN48 pinout 48 HVQFN LPC2106FHN48 schematic LPC2106FHN48 equivalent LPC2106FHN48 replacement LPC2106FHN48 vs LPC2106FHN48/01 NXP LPC2106FHN48 LPC2106FHN48 60MHz 128KB flash LPC2106FHN48 price LPC2106FHN48 stock

Related Components & Terms

NXP Semiconductors LPC2106FHN48 LPC2106FHN48/01 LPC2106FHN48,551 LPC2106FHN48/01,55 LPC2106FHN48/01551 LPC2106FHN48/00 ARM7TDMI-S ARM7 architecture 32-bit microcontroller embedded microcontroller microcontroller semiconductor ISP IAP UART I2C SPI general-purpose I/O real-time emulation embedded trace 48-HVQFN QFN package family surface mount industrial serial gateway
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details