PIC10F200-E/MC - 8-Bit Flash MCU, 384B, 4MHz, 8-DFN | Microchip
MPN: PIC10F200-E/MC ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0.78 | $0.78 |
| 10 | $0.72 | $7.20 |
| 100 | $0.65 | $65.00 |
| 500 | $0.58 | $290.00 |
| 1,000 | $0.52 | $520.00 |
PIC10F200-E/MC Overview
An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory, data memory, and I/O peripherals on a single die; in the broader component taxonomy it sits below microprocessors and above simple logic. The PIC10F200 belongs to the baseline PIC10F family from Microchip Technology - the smallest Flash-programmable 8-bit MCU line in the industry. Unlike 32-bit Cortex-M parts, 8-bit MCUs are optimized for deterministic, low-power, low-cost glue logic replacement in cost-sensitive embedded designs.
Key features include 4 I/O pins (GPIO), an 8-bit timer (TMR0) with 8-bit prescaler, an integrated 4 MHz internal precision oscillator, a power-on reset (POR) and device reset timer (DRT), and a watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation without external components. The wide operating voltage range of 2.0V to 5.5V and -40C to +125C extended temperature grade support battery-powered and industrial-grade designs.
The PIC10F200-E/MC uses a Harvard RISC architecture with separate program and data buses, executed in a single instruction cycle (4 clocks) except for program branches which take two cycles. The Flash memory supports in-circuit serial programming (ICSP) via two pins (GP0/GP1), enabling firmware updates in the field without removing the device. An 8-bit wide instruction word, 12-bit program memory width, and 8-level hardware stack simplify C and assembly development with the MPLAB XC8 toolchain.
Typical applications include low-end logic replacement in consumer appliances, PWM LED dimming, fan/thermostat control in HVAC, battery chargers, and sensor signal conditioning. The 8-DFN (MC) package enables surface-mount designs under 6 mm squared - ideal where PCB area is at a premium. The wide VDD range and small footprint make this part popular as a configurable replacement for discrete 555 timer and CMOS logic circuits in production designs.
When designing with this MCU, note that only 4 of the 6 functional pins are brought out as GPIO on the 8-DFN package (the SOT-23 6-pin version exposes all 6). Place a 100 nF decoupling capacitor as close to VDD as possible, and consider the in-circuit serial programming (ICSP) pinout when laying out the PCB. The internal 4 MHz oscillator has a factory calibration of +/- 1% typical, eliminating external crystals in most cost-sensitive designs.
This page synthesizes distributor pricing, verified drop-in alternatives within the PIC10F family, and practical PCB layout/design notes that complement the manufacturer datasheet and standard distributor listings.
Drop-in alternatives for PIC10F200-E/MC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC10F200-E/MC (same form factor and footprint) — differing in Timers, Package, I/O Pins, Internal Oscillator, Program Memory (Flash).
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC10F200-I/MC
✅ Drop-In✓ In Stock
$0.42 / Unit
View Datasheet →PIC10F202-E/MC
✅ Drop-In📋 Reference alternative (not in catalog)
PIC10F204-E/MC
✅ Drop-In✓ In Stock
$0.26 / Unit
View Datasheet →PIC10F206-E/MC
✅ Drop-In📋 Reference alternative (not in catalog)
PIC10F220-E/MC
✅ Drop-In✓ In Stock
$0.53 / Unit
View Datasheet →PIC10F200-E/MC Maximum Ratings & Electrical Characteristics
| Core Architecture | 8-bit PIC RISC |
| Program Memory (Flash) | 384 bytes (256 x 12-bit words) |
| Data RAM | 16 bytes |
| Maximum CPU Speed | 4 MHz |
| Instruction Set | 33 single-word/single-cycle instructions |
| Instruction Width | 12-bit |
| I/O Pins | 4 (bidirectional GPIO) |
| Timers | 1 x 8-bit (TMR0) with 8-bit prescaler |
| Watchdog Timer (WDT) | Yes (independent on-chip RC oscillator) |
| Internal Oscillator | 4 MHz factory calibrated (+/- 1% typical) |
| Operating Voltage (VDD) | 2.0 V to 5.5 V |
| Operating Temperature | -40 C to +125 C (Extended) |
| Package | 8-pin DFN (2x3 mm) |
| ICSP Programming | Yes (2-wire in-circuit serial programming via GP0/GP1) |
| Power-on Reset (POR) | Yes |
| RoHS Status | Compliant |
PIC10F200-E/MC Pin Configuration
| Pin 1 | VDD — Positive supply voltage (2.0V to 5.5V) |
| Pin 2 | GP5/OSC1/CLKIN — General-purpose I/O / oscillator input / external clock input |
| Pin 3 | GP4/OSC2/CLKOUT — General-purpose I/O / oscillator output / clock output |
| Pin 4 | GP3/MCLR/VPP — General-purpose input only / Master Clear reset / programming voltage |
| Pin 5 | VSS — Ground reference |
| Pin 6 | GP0/ICSPDAT — General-purpose I/O / ICSP data |
| Pin 7 | GP1/ICSPCLK — General-purpose I/O / ICSP clock |
| Pin 8 | GP2/T0CKI — General-purpose I/O / Timer 0 clock input |
Typical Applications
PIC10F200-E/MC is suitable for 6 applications: Discrete Logic Replacement, LED Driver / PWM Dimming, Battery-Powered Sensor Node, Fan / Motor Speed Control, Toy / Consumer Electronics Controller, Automotive Subsystem Controller.
Discrete Logic Replacement
The PIC10F200-E/MC replaces 2-4 discrete 555 timer or CMOS logic ICs (74HC00 family) in cost-sensitive designs. Its 384-byte Flash, 4 MHz execution, and 4 GPIO are sufficient to implement monostable/astable timing, latch functions, and simple state machines on a 2x3 mm footprint. With only $0.52 per unit at 1k quantity, it often costs less than the discrete parts it replaces, while adding firmware flexibility. Designers gain field-upgradeable behavior via in-circuit serial programming (ICSP) using just pins GP0/GP1, eliminating rework when logic needs to change.
Recommended
LED Driver / PWM Dimming
The PIC10F200-E/MC's TMR0 8-bit timer with prescaler generates accurate PWM for LED brightness control, fading, and color mixing. Software PWM at 4 MHz easily achieves 8-bit PWM resolution at 1 kHz update rate - sufficient for human-perceptible smooth dimming. Its 2.0V-5.5V VDD range allows direct drive of LEDs from single-cell Li-ion or 3x AA supplies without level shifters. The wide -40 C to +125 C operating range suits automotive interior lighting and industrial indicator applications.
Recommended
Battery-Powered Sensor Node
The PIC10F200-E/MC's low current draw makes it ideal for battery-powered sensor nodes such as thermostats, smoke detectors, and remote controls. At 4 MHz the core draws under 1 mA active, and sleep current drops to microamp levels for multi-year battery life on 2x AA cells. Its 4 GPIO pins can directly interface thermistors, photo-diodes, or simple switches without external ADC (using TMR0 with internal comparator on the PIC10F204).
Recommended
Fan / Motor Speed Control
The PIC10F200-E/MC implements closed-loop fan or small DC motor speed control via TMR0-based PWM and software PI control. With a 4 MHz clock and 8-bit timer resolution, PWM frequencies up to 62.5 kHz are possible - above the audible range - eliminating motor whine. The internal 4 MHz oscillator with +/- 1% accuracy eliminates external timing components, reducing BOM cost and PCB area. Extended -40 C to +125 C temperature operation supports under-hood automotive and industrial motor applications.
Recommended
Toy / Consumer Electronics Controller
The PIC10F200-E/MC's tiny 2x3 mm DFN footprint and sub-$0.50 unit price make it ideal for toys, novelties, and consumer gadgets where every millimeter and every cent counts. Its 384-byte Flash supports multi-mode sound playback, button debouncing, and motor sequencing. RISC 33-instruction simplicity lets junior engineers program complex behaviors in assembly in days. The 8-pin DFN also fits inside button cells for ultra-compact form factors.
Recommended
Automotive Subsystem Controller
The PIC10F200-E/MC's -40 C to +125 C extended temperature grade and 5.5V VDD tolerance suit non-safety automotive subsystems like accessory lighting, seat controllers, and HVAC auxiliaries. Its 8-DFN package fits within tight under-dash modules, and the ICSP programming allows firmware updates during end-of-line manufacturing. Note: This part is NOT AEC-Q100 qualified - for safety-critical automotive functions, design with PIC16F or PIC18F AEC-Q100 qualified alternatives.
Recommended
Recommended Products Summary
Engineering reference data for PIC10F200-E/MC — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC10F200-I/MC | PIC10F202-E/MC | PIC10F204-E/MC | PIC10F206-E/MC | PIC10F220-E/MC |
|---|---|---|---|---|---|---|
| Package | 8-DFN (2x3 mm) | 8-DFN (2x3 mm) | 8-DFN (2x3 mm) | 8-DFN (2x3 mm) | 8-DFN (2x3 mm) | 8-DFN (2x3 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Program Memory | 384 bytes (256 x 12-bit) | 384 bytes | 512 bytes | 512 bytes | 896 bytes | 384 bytes |
| Data RAM | 16 bytes | 16 bytes | 24 bytes | 24 bytes | 24 bytes | 16 bytes |
| Maximum Clock Speed | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| GPIO Pins | 4 | 4 | 4 | 4 | 4 | 4 |
| Analog Peripherals | None | None | Comparator | Comparator + 8-bit ADC | Comparator + 8-bit ADC | Comparator + 8-bit ADC |
| Operating Temperature | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
Key Differentiators
- Lowest cost Flash PIC with 8-DFN package (vs PIC10F200-E/P)
- Extended temperature range (vs PIC10F200-I/MC)
- Baseline minimal-cost Flash MCU (vs PIC12F629-I/P)
Design Notes
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 1) of the PIC10F200-E/MC. For battery-powered designs, add a 10 uF bulk capacitor at the power source. The MCU draws under 1 mA active at 4 MHz and microamp-level current in sleep - well-suited for 2x AA or coin-cell operation. The POR (power-on reset) and DRT (device reset timer) handle startup reliably down to 2.0V VDD.
The 8-DFN (2x3 mm) package has an exposed thermal pad on the underside for mechanical integrity - ensure the PCB land pattern includes at least 50% thermal via array under the pad to the ground plane for reliable reflow soldering. Keep ICSP pins GP0 (pin 6) and GP1 (pin 7) accessible during layout - either route to test pads or expose via header for in-circuit programming.
Pin GP3 is input-only - using it as output will damage the device. MCLR (pin 4) must be tied to VDD through a 10 kohm resistor for normal operation, or directly to VDD if no external reset is needed. The internal 4 MHz oscillator accuracy is +/- 1% typical at 25 C but degrades at temperature extremes - for UART or precision timing applications across the full -40 C to +125 C range, calibrate the OSCCAL register against a known reference.
Compliance Information
RoHS compliant per Microchip product page. NOT AEC-Q100 qualified - for AEC-Q100 automotive applications use PIC16F or PIC18F series.
