PIC32MZ2048EFH100T-E/GJX - 200MHz 32-bit MCU 2MB Flash TFBGA-100 | Microchip
MPN: PIC32MZ2048EFH100T-E/GJX ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $11.85 | $11.85 |
| 10 | $10.66 | $106.60 |
| 100 | $9.48 | $948.00 |
| 500 | $8.29 | $4,145.00 |
| 1,000 | $7.11 | $7,110.00 |
PIC32MZ2048EFH100T-E/GJX Overview
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, combining high computational throughput with on-chip peripherals such as timers, ADCs, communication interfaces, and memory. The PIC32 family belongs to the broader class of microcontrollers within the integrated circuits (ICs) hierarchy: microcontroller -> embedded processor -> semiconductor device. The EF subfamily adds an FPU and DSP extensions, placing these parts between general-purpose MCUs and full DSP processors.
Key features of this part include a 200 MHz core with up to 415 DMIPS performance, hardware FPU for fast single- and double-precision math, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for high-speed external memory, a 12-bit ADC up to 5 MSPS, and multiple UART/SPI/I2C interfaces. The device supports up to 8 channels of DMA, parallel graphics port for HMI applications, and JTAG/ICSP debug interfaces.
Typical applications include industrial connectivity gateways, IoT edge nodes, automotive HMI displays (AEC-Q100 qualified), motor control (BLDC/PMSM), and graphical user interfaces with TFT LCD panels. The wide peripheral mix and high Flash/RAM capacity make it well-suited for protocol conversion, secure boot, and complex real-time control loops.
When designing with the PIC32MZ EF, plan the PCB layout for the TFBGA-100 7x7 mm footprint using microvia technology and 0.5 mm pitch escape routing. The high 200 MHz operation requires careful power-rail decoupling with 100 nF plus bulk capacitors on each VDD pin pair, and VREF+ filtering for ADC accuracy.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical thermal and PCB layout guidance that is not consolidated in the manufacturer datasheet.
Drop-in alternatives for PIC32MZ2048EFH100T-E/GJX — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC32MZ2048EFH100T-E/GJX (same form factor and footprint) — differing in Core Architecture, Ethernet, Package, ADC, CAN.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC32MZ2048EFH100-E/GJX
✅ Drop-In✓ In Stock
$11.2 / Unit
View Datasheet →PIC32MZ2048EFM100-I/GJX
✅ Drop-In✓ In Stock
$9.05 / Unit
View Datasheet →PIC32MZ1024EFH100-E/GJX
✅ Drop-In✓ In Stock
$7.65 / Unit
View Datasheet →PIC32MZ2048EFH100T-I/PF
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$9.47 / Unit
View Datasheet →PIC32MZ2048EFH100T-E/GJX Maximum Ratings & Electrical Characteristics
| Core | MIPS32 M-Class Warrior |
| Core Architecture | MIPS32 (PIC32MZ EF) |
| Maximum Clock Frequency | 200 MHz (max 252 MHz family capability) |
| Performance | 415 DMIPS |
| Program Memory (Flash) | 2 MB (2M x 8) |
| SRAM | 512 KB |
| FPU | Yes (IEEE 754-compliant, single/double precision) |
| DSP Extensions | Single-cycle MAC, four 64-bit accumulators |
| Package | 100-TFBGA 7x7 mm (GJX) |
| Operating Temperature | -40C to +125C (E suffix = extended) |
| USB | USB 2.0 High-Speed OTG |
| Ethernet | 10/100 MAC |
| CAN | 2x CAN 2.0b |
| SQI | Yes (Serial Quad Interface) |
| ADC | 12-bit, up to 5 MSPS |
| DMA Channels | Up to 8 |
| Mounting Type | Surface Mount (BGA) |
| RoHS Status | Compliant |
PIC32MZ2048EFH100T-E/GJX 100-tfbga 7x7 mm (gjx) Pin Configuration Guide
Pin configuration for PIC32MZ2048EFH100T-E/GJX (100-tfbga 7x7 mm (gjx) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PIC32MZ2048EFH100T-E/GJX.
Refer to the datasheet for full pin configuration.
Typical Applications
PIC32MZ2048EFH100T-E/GJX is suitable for 6 applications: Industrial IoT Gateway, Automotive HMI Display Controller, Motor Control BLDC/PMSM Drive, Connected Medical Device Controller, Robotics and Industrial Automation, Smart Home Edge Node.
Industrial IoT Gateway
The PIC32MZ2048EFH100T-E/GJX excels as the brain of an industrial IoT gateway thanks to its 10/100 Ethernet MAC, dual CAN 2.0b controllers, USB 2.0 High-Speed OTG, and SQI for external flash storage. With 415 DMIPS of MIPS32 Warrior throughput plus an IEEE 754 FPU, the MCU can run TLS handshakes, MQTT-SN protocol stacks, and Modbus/TCP bridging concurrently without timing collapse. The 2 MB dual-panel Flash supports live firmware updates across the 100-TFBGA footprint, ideal for devices that cannot tolerate downtime. AEC-Q100 grade adds headroom for harsh factory-floor environments.
Recommended
Automotive HMI Display Controller
The PIC32MZ2048EFH100T-E/GJX is a strong fit for automotive HMI controllers driving TFT LCD panels up to WVGA resolution. Its parallel graphics port, 2 MB Flash, and 512 KB SRAM hold a full graphical asset set plus the RTOS and graphics library. AEC-Q100 qualification, -40C to +125C operating range, and dual CAN interfaces let it serve cluster displays and HVAC-HMI in haptic robotics while bridging to the vehicle CAN-FD backbone. FPU-accelerated floating-point math supports anti-aliased graphics and animations smoothly.
Recommended
Motor Control BLDC/PMSM Drive
The PIC32MZ2048EFH100T-E/GJX is well-suited to field-oriented control (FOC) of BLDC and PMSM motors. Its single-cycle MAC DSP extensions, four 64-bit accumulators, and 200 MHz core execute Clarke/Park transforms and PI loops in microseconds, supporting high-RPM motors with smooth torque. The 12-bit ADC at up to 5 MSPS captures current-sense feedback with minimal latency, and dual CAN enables communication with vehicle or factory controllers. Its 100-TFBGA package fits compact integrated drive modules.
Recommended
Connected Medical Device Controller
In connected medical instrumentation such as portable diagnostic monitors or infusion pumps, the PIC32MZ2048EFH100T-E/GJX provides the FPU-accelerated compute for DSP filtering, USB-HS for tethered data transfer, and Ethernet for networked bedside connectivity. With 2 MB Flash and 512 KB SRAM, the MCU holds a real-time OS, full application code, and audit logs in internal non-volatile storage. The AEC-Q100 grade provides extended temperature headroom and reliability margin even in non-automotive medical contexts.
Recommended
Robotics and Industrial Automation
The PIC32MZ2048EFH100T-E/GJX targets robotics controllers with its high-throughput MIPS32 core, dual CAN buses, multi-channel DMA, and parallel capture interfaces. Industrial robot joint controllers demand real-time deterministic computation, which the FPU and DSP extensions accelerate, while the 2 MB Flash hosts full ROS-style protocol stacks and safety logic. AEC-Q100 grade adds reliability margin in factory-floor temperature swings and vibration environments.
Recommended
Smart Home Edge Node
For smart home hubs that aggregate Zigbee/Z-Wave/Wi-Fi/Thread traffic, the PIC32MZ2048EFH100T-E/GJX supplies 415 DMIPS of MIPS32 throughput plus Ethernet MAC and USB-HS for system bridging. The SQI interface accepts large external flash for device databases, and dual-panel Flash supports FOTA updates without bricking deployed units. The 100-TFBGA 7x7 mm footprint fits compact hub enclosures while leaving headroom for Matter protocol stacks running alongside legacy wireless stacks.
Recommended
Recommended Products Summary
Engineering reference data for PIC32MZ2048EFH100T-E/GJX — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC32MZ2048EFH100-E/GJX | PIC32MZ2048EFM100-I/GJX | PIC32MZ1024EFH100-E/GJX |
|---|---|---|---|---|
| Package | 100-TFBGA (7x7 mm) GJX | 100-TFBGA (7x7 mm) GJX - same | 100-TFBGA (7x7 mm) GJX - same | 100-TFBGA (7x7 mm) GJX - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash | 2 MB | 2 MB | 2 MB | 1 MB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB |
| Temperature Grade | -40C to +125C (E, AEC-Q100) | -40C to +125C (E, AEC-Q100) | -40C to +85C (I, Industrial) | -40C to +125C (E, AEC-Q100) |
| Peripherals (Ethernet/CAN/USB-HS) | ENET + 2x CAN + USB-HS + SQI | ENET + 2x CAN + USB-HS + SQI | ENET + 2x CAN + USB-HS + SQI | ENET + 2x CAN + USB-HS + SQI |
| AEC-Q100 Qualified | Yes | Yes | No (Industrial only) | Yes |
Key Differentiators
- AEC-Q100 qualified with same-family 100-TFBGA 7x7 footprint (vs PIC32MZ2048EFM100-I/GJX)
- Tape-and-reel packaging for SMT production (vs PIC32MZ2048EFH100-E/GJX)
- Full 2 MB Flash with dual-panel live update (vs PIC32MZ1024EFH100-E/GJX)
Design Notes
Estimated: at 200 MHz with full peripheral activity, core current draw is approximately 80-100 mA at 1.8V core plus I/O current. Power dissipation on the order of 250-350 mW typical. The 100-TFBGA package depends primarily on PCB copper and inner-plane thermal spreading. For continuous high activity, provide a continuous ground pad under the BGA and 4-layer PCB with dedicated thermal via array to inner ground plane to keep junction temperature below 125C in -E applications.
The 100-TFBGA 7x7 mm has a 0.5 mm ball pitch requiring microvia fan-out (laser-drilled 0.001 mm vias or 0.006 mm drilled microvias with copper-filled plating). Use a 4-layer PCB minimum with dedicated power and ground planes. Decoupling: 100 nF X7R ceramic at every VDD/VSS pin pair plus 4.7 uF bulk on each voltage rail. VREF+ pin requires a low-noise LDO or filtered analog supply plus 10 nF + 1 uF local decoupling for ADC accuracy.
Do not skip the PGECx/PGEDx ICSP programming pins - the PIC32MZ EF has multiple pair options (PGEC1/PGED1, PGEC2/PGED2, etc.). The pair chosen must be consistent (e.g., if PGEC2 is used for ICSPCLK then ICSPDAT must be PGED2). Forgetting this causes programming failures in production. Also note: TFBGA-100 has corner balls omitted - do not assume a full 10x10 grid; consult DS60001320 for the exact ball map.
Keep analog and digital grounds separated at the chip, joining only at a single point near the MCU. Place the Ethernet PHY close to the MCU and route RMII/MII signals with controlled impedance (50 ohm) and matched length pairs. USB-HS D+/D- lines need 90 ohm differential impedance. Place series ferrite beads on analog supply rails to keep ADC SNR high when switching regulators are nearby.
Compliance Information
AEC-Q100 qualified per Microchip's automotive-grade PIC32MZ EF product listing on DigiKey. RoHS compliant. Halogen-free status not explicitly stated in provided data.
