R5F10PLFLFB#X5 - 16-Bit 32MHz RL78/F14 MCU | Renesas Electronics
MPN: R5F10PLFLFB#X5 ✗ End of LifeR5F10PLFLFB#X5 Overview
An RL78/F14 belongs to the embedded microcontroller hierarchy: MCU -> 16-bit microcontroller -> automotive-grade MCU -> embedded control IC. The RL78 core is designed around efficient instruction execution and low standby current, which helps reduce the energy required in battery-operated, always-connected, and duty-cycled systems. The device is suitable for body electronics, motor control, climate-control modules, lighting controllers, and small industrial controllers.
Key characteristics include 192 KB flash program memory, a 16-bit architecture, operation up to 32 MHz, integrated CAN and LIN interface support, and timer RD and comparator resources for motor-control and sensing applications. The 64-LFQFP package exposes a broad set of general-purpose I/O and communication signals while remaining compatible with standard surface-mount assembly processes. The family also supports functional-safety-oriented design techniques for automotive-oriented systems.
Typical designs use the microcontroller for sensor acquisition, actuator command generation, CAN or LIN network management, and closed-loop motor control. Its low-consumption-current positioning makes it useful in battery-powered sensors, automotive sub-systems, and industrial nodes that spend substantial time in low-power states. The flash memory provides enough space for protocol stacks, diagnostic routines, control algorithms, and boot logic in a single device.
When designing a board around the R5F10PLFLFB#X5, verify the exact pin multiplexing, peripheral instances, and pin electrical limits against the manufacturer datasheet. Confirm the operating voltage, crystal configuration, communication transceiver requirements, and automotive qualification requirements for the selected ordering code. The package drawing and land pattern should be taken from the package information in the Renesas documentation rather than from a generic 64-pin QFP footprint.
Drop-in alternatives for R5F10PLFLFB#X5 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
R5F10PLHLFB#X5
✅ Drop-In📋 Reference alternative (not in catalog)
R5F10PLFLFB#H5
✅ Drop-In📋 Reference alternative (not in catalog)
R5F10BLFLFB#X5
✅ Drop-In📋 Reference alternative (not in catalog)
R5F10PLFLFB#X5 Maximum Ratings & Electrical Characteristics
| Product Type | 16-bit microcontroller |
| Series | RL78/F14 |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 192 KB flash |
| Core Architecture | 16-bit RL78 core |
| Package | 64-LFQFP, 10 mm x 10 mm |
| Mounting Type | Surface mount |
| Connectivity | CAN and LIN support |
| Motor Control Support | Timer RD and comparator resources |
| Packaging | Tape & Reel |
| Lifecycle Status | Obsolete |
R5F10PLFLFB#X5 64-lfqfp, 10 mm x 10 mm Pin Configuration Guide
Pin configuration for R5F10PLFLFB#X5 (64-lfqfp, 10 mm x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for R5F10PLFLFB#X5.
Refer to the datasheet for full pin configuration.
Typical Applications
R5F10PLFLFB#X5 is suitable for 6 applications: Automotive Body Control Module, BLDC Motor Controller, Industrial Sensor and Gateway Node, Climate and HVAC Control, LED Lighting Control, Battery-Powered Remote Sensor.
Automotive Body Control Module
The R5F10PLFLFB#X5 suits body and climate-control modules because its RL78/F14 architecture combines a 16-bit core with CAN and LIN interface support. Its 192 KB flash is sufficient for control routines, diagnostic logic, and network-handling code. A typical implementation uses timers for actuation timing, comparators for input conditioning, and CAN/LIN peripherals for vehicle-network communication. The 64-LFQFP package keeps the design compact while exposing a broad peripheral set. Confirm the exact automotive qualification, temperature range, and transceiver requirements for the production ordering code.
Recommended
BLDC Motor Controller
The R5F10PLFLFB#X5 is appropriate for a compact BLDC motor-control module because the RL78/F14 family supports timer RD and comparator resources for rotor sensing and PWM-driven commutation. The 32 MHz maximum operating frequency supports deterministic control-loop execution, while 192 KB flash accommodates commutation tables, protection logic, and diagnostic routines. Its CAN and LIN peripherals also allow the controller to exchange commands and status with a vehicle or industrial network. Confirm PWM channel allocation, comparator routing, current limits, and thermal conditions in the Renesas datasheet.
Recommended
Industrial Sensor and Gateway Node
The R5F10PLFLFB#X5 works well in an industrial sensor node that must gather analog inputs, run local filtering, and communicate with a higher-level controller. The 16-bit core and 32 MHz clock provide enough performance for sensor conditioning and protocol processing, while the low-consumption-current RL78 positioning supports duty-cycled operation. The 192 KB flash can hold drivers, filtering algorithms, and communication routines. Use CAN or LIN where appropriate, and verify the required operating voltage, I/O count, and low-power wake-up behavior against the device documentation.
Recommended
Climate and HVAC Control
The R5F10PLFLFB#X5 fits compact HVAC control boards that combine temperature sensing, fan or valve control, and networked diagnostics. Its 16-bit architecture and 32 MHz maximum clock support control-loop tasks and debounced input handling, while the flash memory provides room for calibration tables and fault-management code. Comparators and timers can assist with sensing and actuator timing, and the communication peripherals support integration with vehicle or building networks. Verify the specific PWM and ADC resources, operating-temperature limits, and automotive qualification before production release.
Recommended
LED Lighting Control
The R5F10PLFLFB#X5 can serve as the controller in a networked LED or industrial lighting module where accurate timing and low standby consumption are important. Timer resources support PWM generation, and the 32 MHz maximum clock provides margin for dimming logic, fault detection, and communication handling. Its 192 KB flash is ample for calibration data, animation tables, and diagnostic functions. The 64-LFQFP package simplifies assembly using standard surface-mount processes. Confirm LED-driver topology, current-regulation requirements, thermal limits, and the availability of the required timer channels in the datasheet.
Recommended
Battery-Powered Remote Sensor
The R5F10PLFLFB#X5 is a reasonable controller for a battery-powered remote sensor because the RL78/F14 family is positioned around low consumption current. The device can periodically wake to read sensor inputs, filter measurements, update diagnostics, and transmit data through a network interface before returning to a low-power state. Its 32 MHz maximum clock leaves performance headroom for local processing, while 192 KB flash supports firmware and calibration data. Confirm the available sleep modes, wake-up sources, ADC performance, and supply-voltage range in the manufacturer documentation.
Recommended
Recommended Products Summary
Engineering reference data for R5F10PLFLFB#X5 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | R5F10PLHLFB#X5 | R5F10PLFLFB#H5 | R5F10BLFLFB#X5 |
|---|---|---|---|---|
| Package | 64-LFQFP (10x10) | 64-LFQFP (10x10) | 64-LFQFP family configuration | 64-LFQFP family configuration |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Series | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 |
| Core Architecture | 16-bit RL78 core | 16-bit RL78 core | 16-bit RL78 core | 16-bit RL78 core |
Key Differentiators
- Same-family 192 KB flash and 32 MHz performance (vs R5F10PLHLFB#X5)
- Automotive-oriented CAN and LIN integration (vs R5F10PLFLFB#H5)
- Motor-control-oriented peripheral set (vs R5F10BLFLFB#X5)
- Established 64-LFQFP 10 mm by 10 mm footprint (vs R5F10PLHLFB#X5)
Design Notes
Do not assume that the H5 or BL ordering suffix is electrically interchangeable with the X5 code. Confirm the pin mapping, temperature grade, qualification status, flash configuration, and peripheral options in the Renesas ordering table before substitution. The 64-LFQFP footprint is necessary for mechanical fit, but pin-compatible form factors do not by themselves guarantee identical firmware behavior.
Route the MCU power, decoupling, and communication signals according to the Renesas reference layout and package recommendations. Place bulk and high-frequency decoupling close to the device supply pins, keep switching or high-current traces away from sensitive analog inputs, and use a stable return path for CAN and LIN interfaces. External transceivers and termination components must follow their own interface requirements.
For low-power sensor and automotive nodes, plan the sleep-mode budget from the MCU datasheet rather than assuming the maximum 32 MHz clock is active continuously. Determine which peripherals remain powered, which interrupt sources can wake the core, and how the CAN or LIN transceiver behaves during standby. Validate brownout behavior and startup timing across the full supply and temperature range.
Treat the MCU pins used for motor-control PWM and communication as potentially noisy signals. Keep sensitive sensing routes short, separate from motor-drive power paths, and provide local filtering where required. Use the comparator and timer routing shown in the datasheet for rotor sensing and PWM generation, and check timing margins at the highest intended operating frequency.
Compliance Information
The product is an obsolete RL78/F14 microcontroller. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the product information and must be confirmed for the exact ordering code.