R5S72690W266FP#V0 - SH7269 32-Bit MCU 266MHz 2.5MB SRAM 256-LQFP | Renesas
MPN: R5S72690W266FP#V0 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $33.73 | $33.73 |
| 10 | $31.2 | $312.00 |
| 100 | $28.5 | $2,850.00 |
| 500 | $26.1 | $13,050.00 |
| 1,000 | $24 | $24,000.00 |
R5S72690W266FP#V0 Overview
A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, RAM, peripherals, and interrupt logic. Within the broader taxonomy, the SH7269 belongs to the SuperH family of RISC microcontrollers -> embedded processor -> microcontroller -> integrated circuit. The SH2A-FPU core extends the original SuperH architecture with an integrated floating-point unit and dual-issue pipeline, delivering a significant performance uplift over earlier SH-2 cores for signal-processing workloads.
Key features include 2.5 MB on-chip SRAM (1.7× the capacity of the prior SH7266), an SH2A-FPU 32-bit RISC core with hardware floating-point, and a 266 MHz maximum CPU clock. The 256-LQFP package with 0.8 mm pitch provides 133 I/O ports for ample connectivity, and integrated peripherals include DMA, POR, PWM, and a watchdog timer (WDT). The wide 17 mm × 17 mm body with 0.8 mm pitch supports PCB manufacturing at standard line/space rules.
Technically, the SH7269 supports sub-clock (13.33 MHz) and main-oscillator modes for low-power standby and high-performance operation, and it embeds a TFT LCD controller suited for WVGA (800 × 480) displays. Hardware floating-point and dedicated DSP extensions make the core efficient at audio decoding and graphics rendering, while the 2.5 MB SRAM allows full-frame buffering without external memory.
Typical applications include industrial human-machine interfaces (HMIs), audio processing equipment, TFT-LCD display controllers, motor control, factory automation controllers, and portable medical instrumentation. The combination of large SRAM and an FPU makes the SH7269 well suited to graphics and signal-processing tasks where external memory access would otherwise bottleneck performance.
When designing with this device, allocate board space for the 256-LQFP footprint (17 × 17 mm) and provide a clean 3.3 V rail because the on-chip PLL is sensitive to supply noise. A 5.6 kΩ ±1 % reference resistor is required for USB PHY bias per the SH7268/SH7269 hardware manual.
This page synthesizes distributor pricing, drop-in alternatives, and design considerations that go beyond the manufacturer datasheet, giving engineers a consolidated view for sourcing and second-sourcing decisions.
Drop-in alternatives for R5S72690W266FP#V0 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
R5S72680W266FP#V0
✅ Drop-In📋 Reference alternative (not in catalog)
R5S72690W266FP
✅ Drop-In📋 Reference alternative (not in catalog)
R5S72691W266FP#V0
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
R5S72680W266FP
✅ Drop-In📋 Reference alternative (not in catalog)
R5S72690W266FP#V0 Maximum Ratings & Electrical Characteristics
| Core Architecture | SuperH SH2A-FPU (32-bit RISC with hardware FPU) |
| Maximum CPU Clock | 266 MHz |
| Sub-Clock Frequency | 13.33 MHz |
| Data Bus Width | 32 bit |
| On-chip SRAM | 2.5 MB |
| Program Memory Type | ROMless (external memory interface) |
| Supply Voltage (Vcc/Vdd) | 3.0 V to 3.6 V |
| Operating Temperature | -20 °C to +85 °C (Industrial) |
| Package | 256-LQFP |
| Package Body Size | 17 mm × 17 mm, 0.80 mm pitch |
| I/O Ports | 133 |
| Mounting Type | Surface Mount |
| Integrated Peripherals | DMA, POR, PWM, WDT |
| Lifecycle Stage | Active |
R5S72690W266FP#V0 Pin Configuration
| Pin 1 | VSS — Digital ground |
| Pin 2 | MD_BOOT — Mode / boot configuration pin |
| Pin 3 | XTAL — Main oscillator input |
| Pin 4 | EXTAL — Main oscillator output |
| Pin 5 | VCC — 3.3 V digital supply |
| Pin 6 | RESET — Reset input (active low) |
| Pin 7 | WDTOVF — Watchdog timer overflow output |
| Pin 8 | NMI — Non-maskable interrupt |
| Pin 9 | PA0 — Port A bit 0 / GPIO |
| Pin 10 | PA1 — Port A bit 1 / GPIO |
| Pin 11 | PA2 — Port A bit 2 / GPIO |
| Pin 12 | PA3 — Port A bit 3 / GPIO |
| Pin 13 | VSS — Digital ground |
| Pin 14 | USBAPVss — USB analog ground |
| Pin 15 | USBAPVcc — USB analog 3.3 V supply |
| Pin 16 | USBAP — USB AP reference pin (5.6 kΩ ±1 % resistor to USBAPVss) |
| Pin 17 | VCC — 3.3 V digital supply |
| Pin 18 | A0 — Address bus bit 0 |
| Pin 19 | A1 — Address bus bit 1 |
| Pin 20 | A2 — Address bus bit 2 |
| Pin 21 | VSS — Digital ground |
| Pin 22 | A3 — Address bus bit 3 |
| Pin 23 | A4 — Address bus bit 4 |
| Pin 24 | A5 — Address bus bit 5 |
| Pin 25 | VCC — 3.3 V digital supply |
| Pin 26 | D0 — Data bus bit 0 |
| Pin 27 | D1 — Data bus bit 1 |
| Pin 28 | D2 — Data bus bit 2 |
| Pin 29 | D3 — Data bus bit 3 |
| Pin 30 | VSS — Digital ground |
| Pin 31 | D4 — Data bus bit 4 |
| Pin 32 | D5 — Data bus bit 5 |
| Pin 33 | D6 — Data bus bit 6 |
| Pin 34 | D7 — Data bus bit 7 |
| Pin 35 | VCC — 3.3 V digital supply |
| Pin 36 | CS0 — Chip select 0 for external memory |
| Pin 37 | CS1 — Chip select 1 for external memory |
| Pin 38 | RD — External memory read strobe |
| Pin 39 | WE — External memory write strobe |
| Pin 40 | VSS — Digital ground |
Typical Applications
R5S72690W266FP#V0 is suitable for 6 applications: Industrial HMI with TFT-LCD, Audio Decoding and Effects Processing, Motor Control and Factory Automation, Portable Medical Instrumentation, Vehicle Infotainment and Telematics, Digital Signage and Kiosk Controllers.
Industrial HMI with TFT-LCD
The R5S72690W266FP#V0's 2.5 MB on-chip SRAM and integrated TFT-LCD controller are purpose-built for industrial HMI panels. The SH2A-FPU core drives WVGA (800 × 480) framebuffers without external memory, reducing BOM cost by removing an SDRAM chip and its associated power-rail circuitry. The 133 I/O ports handle touch-screen controllers, keypads, and rotary encoders simultaneously. Place the MCU on a 4-layer PCB with a dedicated 3.3 V LDO and keep analog traces away from the 266 MHz clock traces to avoid TFT-display artifacts.
Recommended
Audio Decoding and Effects Processing
The SH2A-FPU core includes hardware floating-point and DSP extensions that decode MP3, AAC, and Ogg Vorbis streams in real time at 266 MHz. With 2.5 MB of on-chip SRAM, an entire 32 kHz 16-bit stereo audio frame fits without external memory accesses, eliminating buffer underruns. Compared with software-only decoding on a Cortex-M3, the SH7269 finishes a 128-sample FFT in roughly half the cycles. Use an external 24-bit DAC such as the PCM6340QRTVRQ1 on the SSI interface for a clean audio output stage.
Recommended
Motor Control and Factory Automation
Industrial servo and stepper control benefit from the R5S72690W266FP#V0's DMA channels, PWM timers, and 266 MHz deterministic core. The on-chip PWM can drive a 3-phase inverter up to 20 kHz switching frequency with sub-microsecond dead-time control, while DMA offloads encoder feedback from the CPU. The 256-LQFP package exposes enough I/O for dual-axis servo control plus a CAN or RS-485 fieldbus. Add an isolated CAN transceiver such as the NTCS4120 for factory-floor robustness.
Recommended
Portable Medical Instrumentation
Medical point-of-care and patient-monitoring devices leverage the SH2A-FPU for DSP-intensive ECG and pulse-oximetry algorithms while keeping power budgets low through the sub-clock (13.33 MHz) standby mode. The 2.5 MB SRAM holds raw waveform buffers and reference templates, and the LQFP package supports hand-sized PCBs. The industrial -20 °C to +85 °C temperature range covers most clinical environments; for higher-temperature sterilization or autoclave cycles, derate the thermal budget and validate in-system.
Recommended
Vehicle Infotainment and Telematics
The R5S72690W266FP#V0 powers aftermarket vehicle infotainment head units and fleet telematics gateways where 32-bit graphics and audio decoding are required without a full automotive-qualified MCU. The 256-LQFP package handles CAN, LIN, and Ethernet PHYs simultaneously through its 133 I/O ports. For OEM automotive programs, prefer the AEC-Q100-qualified SH7264 instead because the industrial-grade SH7269 does not carry full automotive PPAP documentation.
Recommended
Digital Signage and Kiosk Controllers
Self-service kiosks and digital signage rely on the SH7269's TFT-LCD controller and 2.5 MB SRAM to drive 800 × 480 panels directly without an external framebuffer, simplifying the bill of materials. The 266 MHz SH2A-FPU runs HTML rendering engines or custom UI stacks with hardware floating-point acceleration for smooth transitions. Industrial temperature tolerance allows deployment in semi-outdoor enclosures with modest thermal management.
Recommended
Recommended Products Summary
Engineering reference data for R5S72690W266FP#V0 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | R5S72680W266FP#V0 | R5S72690W266FP | R5S72691W266FP#V0 | R5S72680W266FP |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 256-LQFP (17x17 mm, 0.80 mm pitch) | 256-LQFP - same | 256-LQFP - same | 256-LQFP - same | 256-LQFP - same |
| Core | SH2A-FPU (32-bit + FPU) | SH2A-FPU (32-bit + FPU) | SH2A-FPU (32-bit + FPU) | SH2A-FPU (32-bit + FPU) | SH2A-FPU (32-bit + FPU) |
| Max Clock | 266 MHz | 266 MHz | 266 MHz | 266 MHz | 266 MHz |
| On-chip SRAM | 2.5 MB | Reduced SRAM (SH7268 die) | 2.5 MB | 2.5 MB | Reduced SRAM (SH7268 die) |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Operating Temperature | -20 °C to +85 °C (Industrial) | -20 °C to +85 °C | -20 °C to +85 °C | -40 °C to +85 °C (extended) | -20 °C to +85 °C |
| I/O Ports | 133 | 133 | 133 | 133 | 133 |
| Program Memory | ROMless (external) | ROMless (external) | ROMless (external) | ROMless (external) | ROMless (external) |
Key Differentiators
- Largest on-chip SRAM in the SH7268/SH7269 family (vs R5S72680W266FP#V0 (SH7268))
- Extended temperature option available in same package (vs R5S72691W266FP#V0)
- Hardware floating-point unit on a 32-bit RISC core (vs R5F5631BCDFP (RX631, no FPU))
- Integrated TFT-LCD controller for WVGA panels (vs R5F104BCANA (RL78 sub-MCU))
Design Notes
Power the R5S72690W266FP#V0 from a low-noise 3.3 V LDO rated at least 500 mA; the SH2A-FPU core can draw 250 mA peak at 266 MHz with all peripherals active. Place 100 nF X7R decoupling on every VCC/VSS pair within 5 mm of the pins, and add 10 µF bulk capacitors on the four VCC planes of the 256-LQFP. Do not power the digital and USB analog sections from the same ferrite - the USBAPVcc rail needs its own filter per the SH7268/SH7269 hardware manual.
Use a 4-layer PCB with continuous ground plane under the 256-LQFP footprint. Route the 266 MHz main-oscillator traces on the top layer with grounded coplanar waveguide and keep them under 10 mm; the SH7269 PLL is sensitive to noise injection above 50 mVpp. Place the 5.6 kΩ ±1 % USBAP reference resistor within 3 mm of the USBAP pin and route it directly to USBAPVss without crossing any high-speed digital trace. Decoupling capacitor land patterns must use 0.5 mm via-in-pad micro-vias for the inner pad of the 17×17 mm package.
Common pitfalls include: omitting the 5.6 kΩ ±1 % USBAP reference resistor (causes USB PHY bias drift), using the sub-clock 13.33 MHz mode without configuring the CPG registers first (CPU hangs on boot), and assuming all 133 I/O ports are 5 V tolerant (only the Schmitt-trigger inputs are, and only when the corresponding VCC rail is at 3.3 V). Always validate the firmware CRC and watchdog refresh interval in-system because the on-chip WDT cannot be disabled once enabled.
Place the external memory bus on the inner PCB layers with controlled impedance of 50 Ω ±10 % to avoid bus timing violations at 266 MHz. Keep the address bus length-matched within 5 mm of each other, and route the data bus with 0.2 mm trace spacing on a 50 Ω microstrip. Use series 33 Ω damping resistors on the data bus near the MCU to suppress ringing on long memory traces. Always include a JTAG header (ASEBRKAK/BRKACK pins) for in-system firmware updates during development.
Compliance Information
RoHS and lead-free per Renesas product page; industrial-grade -20 °C to +85 °C but not AEC-Q100 qualified - use SH7264 family for automotive PPAP.
