STM32G484MEY6TR - 170MHz Cortex-M4 512KB MCU | ST
MPN: STM32G484MEY6TR ✓ ActiveSTM32G484MEY6TR Overview
A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, data memory, and peripherals such as timers, communications interfaces, analog converters, and general-purpose input/output ports. The STM32G4 product family belongs to the 32-bit embedded-controller hierarchy, where an Arm Cortex-M4 core executes real-time control algorithms while dedicated hardware handles measurements, waveform generation, communications, and motor-control functions.
The STM32G484MEY6TR combines a 170 MHz Cortex-M4 core with 512 KB of Flash storage. Its feature set includes a math accelerator and high-resolution timer support, which can reduce the computational burden of control loops and improve timing precision. The device also supports 12-bit conversion features and operates from a 3.3 V supply in the identified 81-WLCSP configuration. Its compact package makes it particularly relevant to densely assembled motor-control, power-conversion, and industrial automation boards.
At the architectural level, the Cortex-M4 processor provides a practical balance between performance, memory, and real-time control capability. The math accelerator is useful for digital signal processing and control calculations, while high-resolution timers help capture short timing intervals and generate precise PWM waveforms. These resources allow designers to offload repetitive mathematics and timing tasks without relying entirely on software loops.
Typical applications include digital power supplies, motor-control systems, industrial sensor nodes, compact industrial automation controllers, and embedded measurement equipment. In a motor-control design, the high-resolution timers and math accelerator can support deterministic PWM generation and current-control calculations. In a digital power converter, the same processing capability can improve control-loop responsiveness while the 81-ball WLCSP preserves board area.
The principal design consideration is the density of the 81-ball WLCSP footprint. Its fine pitch requires careful PCB layout, assembly capability, and land-pattern validation. Decoupling, analog grounding, exposed-pad or thermal requirements, and peripheral routing should follow the manufacturer's reference layout rather than a generic WLCSP pattern.
This page organizes the principal electrical, packaging, application, and replacement information for engineers evaluating the STM32G484MEY6TR, including practical guidance for control, analog, and space-constrained embedded designs.
Drop-in alternatives for STM32G484MEY6TR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with STM32G484MEY6TR (same form factor and footprint) — differing in Math Accelerator, Package Type, Product Type.
No drop-in alternatives available for this product.
Request AlternativesSTM32G484MEY6TR Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit microcontroller (MCU) |
| Processor Core | Arm Cortex-M4 32-bit RISC |
| Maximum CPU Frequency | 170 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Supply Voltage | 3.3 V |
| ADC Resolution | 12 bit |
| Math Accelerator | Yes |
| High-Resolution Timer | Yes |
| Core Architecture | Single-core |
| Package Type | 81-WLCSP |
| Package Dimensions | 4.02 mm x 4.27 mm |
| Number of Package Balls | 81 balls |
| Mounting Type | Surface mount |
| Packaging Type | Tape and reel |
STM32G484MEY6TR 81 balls Pin Configuration Guide
Pin configuration for STM32G484MEY6TR (81 balls package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for STM32G484MEY6TR.
Refer to the datasheet for full pin configuration.
Typical Applications
STM32G484MEY6TR is suitable for 6 applications: Digital Power Conversion, Industrial Motor Control, Industrial Sensor Nodes, Precision Measurement Equipment, Communication and Gateway Equipment, Compact Programmable Logic Control.
Digital Power Conversion
The STM32G484MEY6TR fits digital power converters that need fast control-loop execution in a compact board area. Its 170 MHz Cortex-M4 core can execute compensation and supervisory algorithms, while the math accelerator reduces the burden of multiply-intensive control calculations. High-resolution timer resources support precise switching-edge generation and fault-response timing. The 81-ball WLCSP measures only 4.02 mm by 4.27 mm, but its fine pitch requires a qualified assembly process and careful validation of the land pattern.
Recommended
Industrial Motor Control
The STM32G484MEY6TR is suitable for compact motor controllers requiring deterministic PWM generation and computational headroom. The 170 MHz Cortex-M4 core can manage current-control loops, position logic, and fault handling, while the math accelerator assists trigonometric and control-law calculations. High-resolution timer support improves timing precision for inverter control. Its 3.3 V operation and space-saving WLCSP package help reduce controller size, although thermal performance and signal integrity require careful PCB validation.
Recommended
Industrial Sensor Nodes
The STM32G484MEY6TR can serve as the processing center in compact industrial sensor nodes that combine timing-critical acquisition with local control. Its 12-bit conversion capability supports measurements from analog sensors, while the 170 MHz core handles filtering, diagnostics, and protocol tasks. The 512 KB Flash provides storage for firmware and calibration information. The 81-ball WLCSP preserves board area in densely packaged monitoring equipment, while the 3.3 V supply simplifies integration with compatible industrial power rails.
Recommended
Precision Measurement Equipment
The STM32G484MEY6TR is appropriate for compact precision measurement instruments where fast sampling support, accurate timing, and local signal processing are needed. Its 170 MHz Cortex-M4 core can execute filtering and calibration routines, while the math accelerator improves throughput for digital signal-processing calculations. High-resolution timers help establish repeatable measurement intervals. The small 4.02 mm by 4.27 mm WLCSP footprint supports compact instruments without requiring a large microcontroller package.
Recommended
Communication and Gateway Equipment
The STM32G484MEY6TR can provide protocol processing and supervisory control in compact communications equipment. Its 170 MHz Cortex-M4 core handles networking stacks, data formatting, and configuration management, while 512 KB Flash accommodates firmware and protocol parameters. The WLCSP package limits the footprint required for the controller, useful in gateway modules with several functions competing for board area. Interface selection, external transceivers, impedance control, and EMC performance remain system-level design considerations.
Recommended
Compact Programmable Logic Control
The STM32G484MEY6TR can implement compact programmable-control logic where high-speed sampling, timing, and local processing are required. The 170 MHz Cortex-M4 core supports state-machine execution, communications, and diagnostics, while high-resolution timers improve pulse and interval measurement. Its 512 KB Flash is useful for retaining logic programs and configuration data. The compact 81-ball package helps minimize controller size, but assemblers must verify fine-pitch solderability, stencil design, and inspection coverage.
Recommended
Recommended Products Summary
Engineering reference data for STM32G484MEY6TR — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | STMicroelectronics |
| Package | 81-WLCSP |
| Package Dimensions | 4.02 mm x 4.27 mm |
| Processor Core | Arm Cortex-M4 32-bit RISC |
| Maximum CPU Frequency | 170 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Supply Voltage | 3.3 V |
| ADC Resolution | 12 bit |
| Math Accelerator | Yes |
| High-Resolution Timer | Yes |
Key Differentiators
- Exceptionally compact package for a 170 MHz STM32G4 controller (vs STM32G474VET6TR)
- Dedicated math acceleration for embedded control workloads (vs STM32G474VET6TR)
- High-resolution timer capability for precision timing (vs STM32G474VET6TR)
Design Notes
Use the STM32G484MEY6TR package drawing and STMicroelectronics reference layout as the controlling documents for the 81-ball WLCSP footprint. Place local decoupling capacitors beside their corresponding supply balls, minimize loop area, and provide adequate via access where the recommended layout requires it. Treat the 4.02 mm by 4.27 mm body dimensions and ball arrangement as exact package constraints rather than relying on a generic 81-ball WLCSP library footprint.
Keep analog sensing paths, communication interfaces, and timing-sensitive signals separated from switching nodes and high-current return paths. The math accelerator and high-resolution timer resources support deterministic control, but those benefits depend on clean references and predictable clock behavior. Route sensitive signals over continuous ground planes where practical, keep return paths short, and validate crosstalk and ground bounce using the final stack-up.
Do not substitute the STM32G474VET6TR as a board-level drop-in replacement for the STM32G484MEY6TR because their package footprints differ. The STM32G484MEY6TR uses 81 balls, whereas the STM32G474VET6TR uses 64 pins. Before changing MPNs, compare the complete ball or pin table, exposed thermal features, voltage limits, clock configuration, peripheral assignments, and firmware dependencies.
Compliance Information
Compliance declarations for the exact STM32G484MEY6TR configuration were not identified. Confirm current environmental and material compliance status with STMicroelectronics before production release.