STMicroelectronics

STM32L476ZET6 - 80MHz Cortex-M4 512KB MCU | ST

MPN: STM32L476ZET6 ✓ Active
1.8 V, 2.5 V, or 3.3 V Vdss 144-pin LQFP, 20 mm x 20 mm Package 80 MHz Speed 512 KB (512K x 8 bits) Memory
MOQ: 1 |

STM32L476ZET6 Overview

The STMicroelectronics STM32L476ZET6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M4 processor operating up to 80 MHz, 512 KB of Flash memory, and a 144-pin LQFP package measuring 20 mm by 20 mm. It is designed for connected, low-power embedded systems that require strong processing performance, broad peripheral connectivity, and flexible operating-voltage support.

An ultra-low-power microcontroller is a semiconductor device optimized to maintain computing and sensing performance while minimizing energy consumption. The STM32L4 series combines an Arm Cortex-M4 core, embedded Flash, SRAM, analog and digital peripherals, and multiple low-power operating modes within one integrated microcontroller package. This hierarchy places the STM32L476ZET6 in the MCU, embedded-controller, and power-conscious embedded-processing categories.

Key features include a maximum CPU frequency of 80 MHz, 512 KB of Flash organized as 512K by 8 bits, an Arm Cortex-M4 RISC core, and support for 1.8 V, 2.5 V, and 3.3 V operation as identified for this device. The feature set includes an LCD interface, USB OTG, and a hardware floating-point unit according to the manufacturer and distributor product descriptions. These resources support firmware-heavy control systems, human-interface equipment, connected sensors, and portable instruments.

The 32-bit Cortex-M4 architecture provides efficient handling of control loops, communication stacks, and digital signal calculations. The integrated FPU accelerates floating-point operations, while the 512 KB Flash capacity provides room for application code, boot code, configuration data, and protocol libraries. The STM32L4 family also emphasizes energy efficiency, making sleep-mode behavior and peripheral clock management important parts of the overall design strategy.

Typical applications include industrial sensing and control, USB-connected data acquisition, environmental monitoring, medical instrumentation, display interfaces, and embedded communications gateways. A design using the STM32L476ZET6 can combine its 80 MHz processing capability with low-power peripherals while retaining 144 external pins for mixed-signal, serial, and general-purpose I/O expansion.

PCB implementation should preserve the 144-pin LQFP land pattern and route decoupling, reset, clock, boot, and programming signals according to the manufacturer pin-description table. Because the device provides many I/O and peripheral functions, validate pin multiplexing, voltage domains, and power sequencing before committing the board layout.

This product page combines the confirmed processor, memory, voltage, package, and interface characteristics with application guidance, comparison information, and drop-in replacement options. It is intended to help engineers assess board compatibility, firmware support, power requirements, and sourcing requirements before designing the STM32L476ZET6 into a new embedded platform.

Drop-in alternatives for STM32L476ZET6 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with STM32L476ZET6 (same form factor and footprint) — differing in Package, Processor Core, USB Interface, Product Type, Flash Memory.

STMicroelectronics
Package: 144-pin LQFP
Processor Core: Arm Cortex-M4 with FPU
USB Interface: USB OTG FS
Compare with STM32L476ZET6 →
STMicroelectronics
Package: 144-pin LQFP, 20 x 20 mm
Processor Core: Arm Cortex-M4 with FPU
USB Interface: USB OTG FS
Compare with STM32L476ZET6 →
STMicroelectronics
Package: 144-LQFP, 20 x 20 mm
Processor Core: Arm Cortex-M4 with floating-point unit
USB Interface: USB OTG full-speed
Compare with STM32L476ZET6 →

STM32L476ZCT6

✅ Drop-In ⚠️ Specs Unverified
📦 144-LQFP (20x20 mm)
Flash memory is 256 KB versus 512 KB, a 50% reduction, while the Cortex-M4 core remains rated to 80 MHz

📋 Reference alternative (not in catalog)

STM32L476ZGT6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 144-LQFP (20x20 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M4 with FPU · 32-bit RISC · 80 MHz · 100 DMIPS · 1 MB · 128 KB · USB OTG FS

Contact for price

View Datasheet →

STM32L486ZGT6

✅ Drop-In
📦 144-LQFP (20x20 mm)
Flash memory is 1 MB versus 512 KB and the device adds 128/256-bit AES hardware encryption

📋 Reference alternative (not in catalog)

STM32L496ZGT6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 144-LQFP (20x20 mm)
Ultra-low-power 32-bit microcontroller · Arm Cortex-M4 with FPU · 32-bit RISC · 80 MHz · 100 DMIPS · 1 MB · 320 KB · 1.71 V to 3.6 V

Contact for price

View Datasheet →

STM32L4A6ZGT6

✅ Drop-In ⚠️ Specs Unverified
STMicroelectronics
📦 144-LQFP (20x20 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M4 with floating-point unit · 80 MHz · 1 MB · 320 KB · 100 DMIPS · 32-bit RISC · 1.8 V, 2.5 V, or 3.3 V

Contact for price

View Datasheet →

STM32L476ZET6 Maximum Ratings & Electrical Characteristics

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4 32-bit RISC
Maximum CPU Frequency 80 MHz
Flash Memory 512 KB (512K x 8 bits)
Operating Voltage Options 1.8 V, 2.5 V, or 3.3 V
Package 144-pin LQFP, 20 mm x 20 mm
Mounting Type Surface mount
Floating-Point Unit Hardware FPU
LCD Interface Supported
USB Interface USB OTG
Address Bus Width 26 bits
Terminal Count 144 pins
Package Code LFQFP
Package Shape Square
Terminal Form Gull wing

STM32L476ZET6 square Pin Configuration Guide

Pin configuration for STM32L476ZET6 (square package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

square package pinout diagram for STM32L476ZET6

No detailed pinout data available for STM32L476ZET6.

Refer to the datasheet for full pin configuration.

Typical Applications

STM32L476ZET6 is suitable for 6 applications: Industrial Sensor and Control Node, USB Data-Acquisition Instrument, Environmental Monitoring Gateway, Medical Instrument Control Panel, Human-Machine Interface Controller, Connected Industrial Communication Gateway.

🏭

Industrial Sensor and Control Node

The STM32L476ZET6 fits industrial sensor nodes that combine acquisition control, local logic, communications, and low-power behavior. Its Arm Cortex-M4 core runs at up to 80 MHz, allowing sensor sampling, filtering, threshold evaluation, and protocol handling to execute without a separate processor. The 512 KB Flash provides room for application firmware, calibration tables, and communication stacks, while the 144-pin LQFP exposes a broad mix of analog and digital I/O. Operating-voltage options of 1.8 V, 2.5 V, and 3.3 V also support multiple industrial power trees. The principal design consideration is validating the complete pin map, peripheral mix, and operating-temperature requirement for the deployed equipment.

🖥️

USB Data-Acquisition Instrument

The STM32L476ZET6 is suitable for a USB-connected data-acquisition instrument because it combines an 80 MHz Cortex-M4 processor with USB OTG and 512 KB of internal Flash. Firmware can sample sensors, preprocess data, maintain calibration information, and present results over USB while remaining within a single 144-pin LQFP package. Its hardware floating-point unit supports efficient numerical operations in filtering and signal-conditioning routines. The MCU's large pin count simplifies access to timers, serial interfaces, control signals, and external converters. Designers should reserve careful routing for USB data lines, place decoupling close to the supply pins, and confirm how USB clock and power requirements interact with the device's low-power modes.

🧩

Environmental Monitoring Gateway

The STM32L476ZET6 supports environmental monitoring gateways that combine sensor conditioning, local data logging, and low-bandwidth communications. The 80 MHz Cortex-M4 core can execute sampling schedules, compensate sensor readings, detect threshold events, and compress records before transmission. Its 512 KB Flash is useful for firmware, protocol stacks, and configuration data, while the 144-pin package provides ample connections for digital sensors, local displays, status indicators, and radio-control lines. The STM32L4 family's ultra-low-power positioning is particularly relevant to battery-operated deployments where duty-cycled sleep time can dominate energy use. A practical design should disable unused peripherals, group wake-capable functions carefully, and confirm that data-retention behavior supports the required logging interval.

💊

Medical Instrument Control Panel

The STM32L476ZET6 can serve as the central controller in a medical monitoring or diagnostic instrument with multiple sensors, a display, and a host interface. Its 80 MHz Cortex-M4 core provides responsive task scheduling, while the hardware FPU accelerates numeric algorithms used in signal processing and calibration. The 512 KB Flash supports embedded firmware and protocol code, and USB OTG can provide a direct connection to a host or service interface. The 144-pin LQFP package offers sufficient pin density for display control, buttons, indicators, communications, and status monitoring. Because medical equipment imposes strict safety, isolation, and quality-system requirements, engineers must verify the electrical limits, environmental range, and application-specific risk controls before approving the MCU.

📺

Human-Machine Interface Controller

The STM32L476ZET6 is well matched to human-machine interface controllers because the STM32L476 family includes LCD connectivity and the device provides 144 LQFP pins for panel peripherals. The Cortex-M4 core can update a display, scan controls, manage alarms, and update status indicators at up to 80 MHz. USB OTG supports configuration transfer or connection to a higher-level controller, while 512 KB Flash provides sufficient space for graphics, localization data, and interface firmware. Designers can route timer outputs for backlight dimming, use serial interfaces for touch or display modules, and leverage low-power modes when the panel is inactive. Validate the panel voltage, interface timing, ESD strategy, and connector layout to prevent display and control failures.

🌐

Connected Industrial Communication Gateway

The STM32L476ZET6 can serve as a connected gateway controller when a design must bridge local I/O, serial equipment, and an Ethernet or USB uplink. Its 80 MHz Cortex-M4 core handles protocol translation, device management, and local control, while 512 KB Flash accommodates gateway firmware and network stacks. The 144-pin package provides a large peripheral footprint for Ethernet interfaces, isolated serial links, status controls, and expansion buses. Operating from 1.8 V, 2.5 V, or 3.3 V supports integration with multiple logic levels within the gateway architecture. The implementation should use short, controlled routing for high-speed interfaces, maintain continuous reference-plane return paths, and provide isolated power where the communication ports connect to external industrial equipment.

What is the operating frequency of the STM32L476ZET6?
The STM32L476ZET6 operates at up to 80 MHz using an Arm Cortex-M4 32-bit RISC processor. According to the STMicroelectronics STM32L476ZE product page, the STM32L476xx family is built around the high-performance Cortex-M4 core. This frequency supports responsive real-time control, efficient peripheral management, and connected embedded applications while retaining the low-power characteristics of the STM32L4 series.
How much Flash memory does the STM32L476ZET6 have?
The STM32L476ZET6 contains 512 KB of Flash memory organized as 512K by 8 bits. The DigiKey listing identifies this exact capacity for the target MPN, while the STMicroelectronics product family page confirms the STM32L476ZE family position within the STM32L4 portfolio. This on-chip memory accommodates application firmware, bootloader code, configuration tables, and communication-protocol libraries.
What package does the STM32L476ZET6 use?
The STM32L476ZET6 uses a 144-pin LQFP gull-wing package measuring 20 mm by 20 mm. The DigiKey and Arrow product descriptions both identify the exact MPN as a 144-LQFP device, and the Mouser listing places it in the LQFP-144 class. The package provides 144 external terminals for power, ground, analog inputs, timers, serial interfaces, and general-purpose I/O.
What is the STM32L476ZET6 used for?
The STM32L476ZET6 is used for low-power embedded systems that need 80 MHz processing, 512 KB Flash, extensive I/O, and integrated communications. Its Cortex-M4 core and hardware FPU support control loops and signal processing, while USB OTG and LCD connectivity suit data-acquisition instruments, environmental monitors, industrial controllers, medical equipment, and display-oriented embedded products.
Where can I download the STM32L476ZET6 datasheet PDF?
The official STM32L476ZET6 technical information is available through the STM32L476ZE product page at st.com, which links to the device documentation and supporting resources. Use the manufacturer document link for the authoritative pin description, electrical characteristics, memory map, package information, and timing data. Third-party catalog pages can assist with sourcing, but the STMicroelectronics document should define the design values.
Where can I find the STM32L476ZET6 pinout?
The STM32L476ZET6 pinout is defined in the pin-description section of the STM32L476ZET6 documentation on the STMicroelectronics product page. Because the device uses a 144-pin LQFP package, the diagram includes all 144 terminals and their multiplexing functions. Assign PCB nets from that manufacturer table rather than inferring pin functions from another STM32L4 member with a different package.
What are the key specifications engineers should know about STM32L476ZET6?
The key STM32L476ZET6 specifications are an 80 MHz Arm Cortex-M4 core, 512 KB of Flash, a hardware floating-point unit, USB OTG, LCD connectivity, and operation from 1.8 V, 2.5 V, or 3.3 V. The device is packaged in a 144-pin, 20 mm by 20 mm LQFP. STMicroelectronics identifies the family as ultra-low-power, making mode configuration and peripheral clocking central to real-world battery and thermal performance.
Is the STM32L476ZET6 in stock?
Current stock status for the STM32L476ZET6 should be checked through the Request a Quote form on this page. The manufacturer offers direct ordering for this exact tray-packaged MPN, while the exact target also appears in distributor catalogs. Use the quote form to confirm production allocation, minimum order quantity, current availability, and delivery timing for the 144-pin LQFP configuration.
What is the price of the STM32L476ZET6?
Use the Request a Quote form on this page for the current STM32L476ZET6 price, quantity availability, and delivery schedule. The target is an orderable STMicroelectronics microcontroller with a public manufacturer ordering page and distributor listings. A quote confirms the exact suffix, tray packaging, current lifecycle position, and applicable commercial terms rather than relying on a historical catalog figure.
What is the lead time for the STM32L476ZET6?
The current lead time for the STM32L476ZET6 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, allocation, destination, and packaging configuration. The manufacturer ordering page supports direct order handling for the exact MPN, so a quote request provides the most appropriate channel for a firm schedule and current lead-time confirmation.
STM32L476ZET6 vs STM32L486ZGT6 — which is better for a new design?
The STM32L476ZET6 is preferable when 512 KB of Flash is sufficient and the exact 144-LQFP target is prescribed, while the STM32L486ZGT6 provides 1 MB of Flash and 128/256-bit AES hardware encryption. The Utmel comparison result confirms the STM32L486ZGT6 has 1 MB of Flash in a 144-LQFP package. Choose the L486 only after reviewing its memory, encryption, peripheral, and firmware-support differences.
What is the difference between STM32L476ZET6 and STM32L476ZGT6?
The primary documented difference is Flash capacity: the STM32L476ZET6 has 512 KB, while the STM32L476ZGT6 has 1 MB, with both using the STM32L476ZE family and a 144-pin LQFP package. The additional 512 KB can increase firmware flexibility, but a replacement also requires checking the complete pin description, peripheral configuration, power behavior, and embedded software support.
When should I choose the STM32L476ZET6 instead of a higher-memory STM32 variant?
Choose the STM32L476ZET6 when its 80 MHz Cortex-M4 core, 512 KB Flash, USB OTG, LCD interface, and 144-pin LQFP footprint satisfy the design without requiring the extra memory or encryption features of another family member. It is particularly appropriate when minimizing flash excess is important. Otherwise, a 1 MB variant may provide more room for long-term firmware growth and over-the-air update resilience.
Is the STM32L476ZET6 suitable for an industrial sensor controller?
The STM32L476ZET6 is suitable for an industrial sensor controller when the required voltage range, sensing interfaces, serial links, and I/O map fit the 144-pin device. Its 80 MHz Cortex-M4 core can handle acquisition control and communications, while the ultra-low-power STM32L4 positioning supports battery and energy-constrained installations. Validate industrial temperature, isolation, EMC, and qualification requirements separately.
What can replace the STM32L476ZET6?
The closest same-family drop-in candidates are STM32L476ZCT6, STM32L476ZGT6, STM32L486ZGT6, STM32L496ZGT6, and STM32L4A6ZGT6 because they retain the 144-pin LQFP architecture. Their Flash capacities, encryption features, and peripheral sets differ, so none is automatically interchangeable. Review the manufacturer pin tables, clock tree, memory map, peripheral functions, and firmware configuration before approving a replacement.
Is there a verified cross-brand drop-in equivalent for the STM32L476ZET6?
No verified cross-brand drop-in equivalent has been established for the STM32L476ZET6. Cross-brand MCU substitution requires exact package, pin, voltage, clock, peripheral, memory, boot, and software compatibility rather than a similar core or frequency alone. The available alternatives are same-manufacturer STM32L4 family members; a different-brand substitution should be treated as a redesign unless its manufacturer explicitly documents pin compatibility.

Engineering reference data for STM32L476ZET6 — comparison, design guidance, and compliance information.

Selection Guide

Choose the STM32L476ZET6 when the design specifically requires the 512 KB Flash configuration, an 80 MHz Arm Cortex-M4 core, USB OTG, LCD connectivity, and a 144-pin LQFP footprint. Its 1.8 V, 2.5 V, and 3.3 V operating options also make it appropriate for mixed-voltage embedded systems. Select STM32L476ZCT6 when 256 KB is sufficient, or STM32L476ZGT6 when 1 MB is needed for larger firmware and update flexibility. Consider STM32L486ZGT6 when the design requires 128/256-bit AES hardware encryption. STM32L496ZGT6 and STM32L4A6ZGT6 may suit applications needing later family peripherals or security improvements, but each substitution requires a complete review of the pin map, clock configuration, peripheral set, startup code, and embedded-software support.

Comparison with Alternatives

Parameter This Product STM32L476ZCT6 STM32L476ZGT6 STM32L486ZGT6 STM32L496ZGT6 STM32L4A6ZGT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm) 144-LQFP (20x20 mm)
Flash Memory 512 KB 256 KB 1 MB 1 MB 1 MB 1 MB

Key Differentiators

  • Exact 512 KB Flash configuration (vs STM32L476ZCT6)
  • Lower Flash capacity than the 1 MB STM32L476 family option (vs STM32L476ZGT6)
  • No need for the STM32L486-specific AES feature (vs STM32L486ZGT6)

Design Notes

Configure unused pins and peripherals to reduce leakage, disable unused clock trees, and select the appropriate low-power mode before enabling battery-oriented operation. The STM32L476ZET6 supports 1.8 V, 2.5 V, and 3.3 V operation, so match the MCU rail to the voltage tolerance of every connected peripheral. Separate sensitive analog supplies from switching or digital loads where the board architecture permits, and validate the wake-up sequence for sensors that remain powered across sleep transitions.

Use the manufacturer LQFP-144 land pattern and follow the pin-description table for every net. Place supply decoupling close to the corresponding VDD and VSS pins, keep the 20 mm by 20 mm package perimeter routable, and avoid placing high-speed or switching nodes beneath sensitive input pins. Verify programming, boot, reset, and clock connections against the selected startup mode because incorrect strap or debug assumptions can prevent firmware execution.

Do not treat another STM32L4 144-pin member as interchangeable solely because the package and core frequency match. Compare Flash size, peripheral availability, clock tree, security features, pin multiplexing, and firmware initialization. After substituting an alternative, regenerate the device support package, update linker and startup assumptions, retest low-power transitions, and verify every peripheral instance and pin assignment.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status was not stated in the manufacturer product-page or distributor snippets. Confirm the applicable declarations and qualification status in the official STM32L476ZE documentation and STMicroelectronics compliance records.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

STM32L476ZET6 datasheet STM32L476ZET6 datasheet pdf STM32L476ZET6 pinout STM32L476ZET6 specifications STM32L476ZET6 price STM32L476ZET6 stock STM32L476ZET6 equivalent STM32L476ZET6 replacement STM32L476ZET6 cross reference STM32L476ZET6 vs STM32L486ZGT6 STM32L476ZET6 LQFP-144 footprint STM32L476ZET6 application circuit

Related Components & Terms

STMicroelectronics STM32L476ZET6 STM32L476ZE STM32L476ZCT6 STM32L476ZGT6 STM32L486ZGT6 STM32L496ZGT6 STM32L4A6ZGT6 Arm Cortex-M4 32-bit RISC core microcontroller MCU ultra-low-power microcontroller embedded controller semiconductor 512 KB Flash 80 MHz USB OTG LCD interface hardware floating-point unit LQFP-144 surface-mount package 1.8 V operation 2.5 V operation 3.3 V operation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details