XMC1302T038X0200AAXUMA1 - 32MHz ARM Cortex-M0 MCU | Infineon
MPN: XMC1302T038X0200AAXUMA1 ✓ ActiveXMC1302T038X0200AAXUMA1 Overview
An ARM Cortex-M0 microcontroller is a reduced-instruction-set processor designed for embedded control applications. Within the product hierarchy, the XMC1302 belongs to the XMC1000 family of industrial microcontrollers, combining a 32-bit processor core with integrated flash, SRAM, and communication peripherals. This architecture supports deterministic control tasks while keeping system complexity and power requirements relatively low.
The device provides 200 KB of flash for program storage and 16 KB of SRAM for working data. Its 32 MHz operating frequency supports general-purpose embedded processing, while the 38-pin TSSOP package provides a high pin count for mixed-signal and peripheral connections without requiring a large-footprint BGA package. Operation from 3.3 V and 5 V supply environments makes the device suitable for industrial equipment and other embedded platforms using conventional logic voltage rails.
The XMC1302 integrates the ARM Cortex-M0 core with the XMC1000 peripheral family. Independent instruction execution and a compact 16 KB SRAM footprint make it appropriate for control loops, communication gateways, and supervisory tasks where predictable firmware execution and manageable memory requirements are important. The exact peripheral configuration, timer resources, and analog performance should be confirmed against the device-specific datasheet before final design release.
Typical applications include industrial sensor controllers, building automation modules, motor supervisory controllers, communication equipment, and compact embedded control panels. The 38-pin package is useful when a design requires more I/O than a small 20-pin or 32-pin MCU can offer while still supporting automated PCB assembly. Tape-and-reel ordering is identified by the trailing XUMA1 code.
PCB layout should preserve the manufacturer's recommended power, ground, decoupling, and clock connections. Place decoupling capacitors close to the supply pins, route sensitive analog signals away from fast-switching nodes, and include test access for programming and debugging. Before production, verify the exact exposed-pad or thermal requirements associated with the selected package drawing.
This product record combines the manufacturer ordering information, package data, memory configuration, and cross-reference results into a practical engineering reference. It also highlights the boundary between a confirmed device variant and any true pin-compatible replacement, helping designers avoid assuming that similar ARM Cortex-M0 parts can occupy the same PCB footprint.
Drop-in alternatives for XMC1302T038X0200AAXUMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesXMC1302T038X0200AAXUMA1 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M0 industrial microcontroller |
| Processor Core | ARM Cortex-M0 |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 200 KB |
| Flash Organization | 200 KB (200K x 8) |
| SRAM | 16 KB |
| SRAM Organization | 16 KB (16K x 8) |
| Supply Voltage | 3.3 V / 5 V |
| Package | PG-TSSOP-38-9, 38 pins |
| Package Width | 4.40 mm |
| Mounting Type | Surface mount |
| Ordering Package | Tape and reel |
| Operating Temperature | -40°C to +105°C |
XMC1302T038X0200AAXUMA1 tape and reel Pin Configuration Guide
Pin configuration for XMC1302T038X0200AAXUMA1 (tape and reel package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XMC1302T038X0200AAXUMA1.
Refer to the datasheet for full pin configuration.
Typical Applications
XMC1302T038X0200AAXUMA1 is suitable for 6 applications: Industrial Sensor Controller, Building Automation Module, Motor Supervisory Controller, Communication Gateway, Industrial Power Supply Controller, Embedded Data Acquisition Unit.
Industrial Sensor Controller
The XMC1302T038X0200AAXUMA1 fits distributed sensor-hub and condition-monitoring designs that require a 32-bit control processor, 200 KB of program storage, and 16 KB of SRAM. Its 38-pin package can accommodate digital sensors, status indicators, communication lines, and local supervisory functions without moving to a large BGA device. The 32 MHz ARM Cortex-M0 core is appropriate for sampling, filtering, state-machine, and communication tasks. Designers should verify ADC, timer, serial-interface, and pin-multiplexing details in the family datasheet before assigning every sensing channel and communication signal.
Recommended
Building Automation Module
The XMC1302T038X0200AAXUMA1 is appropriate for local building-automation controllers that combine periodic sensor evaluation, actuator control, and serial communications. Its 200 KB flash supports a bootloader plus application logic, while 16 KB of SRAM accommodates control state and communication buffers. The 38-pin PG-TSSOP-38-9 package provides a practical balance between I/O availability and board size, and operation in a 3.3 V or 5 V system simplifies power architecture planning. Confirm the required timer channels, communication peripherals, and pin assignments before finalizing a BACnet, Modbus, or proprietary-network interface.
Recommended
Motor Supervisory Controller
The XMC1302T038X0200AAXUMA1 can monitor motor operation, manage faults, and coordinate system-level safety functions when a dedicated gate driver handles power conversion. The 32 MHz Cortex-M0 core provides responsive execution for supervisory loops, while 200 KB of flash and 16 KB of SRAM are useful for parameter storage, diagnostics, and communication protocols. The 38-pin package offers enough connections for position inputs, fault signals, and communications. Before using it for closed-loop motor control, confirm PWM resolution, ADC performance, comparator resources, and timing behavior against the exact XMC1302 device documentation.
Recommended
Communication Gateway
The XMC1302T038X0200AAXUMA1 can serve as a protocol gateway when a product must translate between local serial interfaces and a higher-level embedded control platform. Its 200 KB flash is useful for protocol stacks and configuration tables, and the 16 KB SRAM supports message buffering without requiring an external memory device. The 38-pin package can expose several communication and status connections. Verify the exact UART, SPI, I2C, CAN, and USB-related resources, peripheral multiplexing, and package-level signal constraints before selecting it for a gateway with high bus traffic.
Recommended
Industrial Power Supply Controller
The XMC1302T038X0200AAXUMA1 is suitable for supervisory control in programmable industrial power systems where the MCU must monitor operating conditions and coordinate external power stages. Its 32-bit Cortex-M0 architecture and 32 MHz clock support deterministic control tasks, while 200 KB of flash can hold configuration, sequencing, and fault-handling logic. The 38-pin package allows connection of monitoring inputs, control outputs, and communications. Verify the analog input accuracy, comparator availability, control-loop timing, and safety requirements in the manufacturer documentation before assigning a supervisory role.
Recommended
Embedded Data Acquisition Unit
The XMC1302T038X0200AAXUMA1 fits compact data-acquisition units that gather local measurements, apply configuration, and forward results through a communications interface. The 200 KB flash capacity supports firmware, calibration tables, and communication code, while 16 KB of SRAM handles acquisition state and packet buffers. Its 38-pin package provides more external connections than a low-pin-count MCU while remaining compatible with automated surface-mount assembly. Validate ADC resolution, sampling characteristics, conversion timing, reference requirements, and multiplexing before finalizing signal-chain assignments.
Recommended
Recommended Products Summary
Engineering reference data for XMC1302T038X0200AAXUMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Infineon Technologies |
| Package | PG-TSSOP-38-9, 38-pin surface-mount package |
| Processor Core | ARM Cortex-M0, 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 200 KB |
| SRAM | 16 KB |
| Supply Voltage | 3.3 V / 5 V |
| Ordering Package | Tape and reel |
Key Differentiators
- Higher flash capacity within the identified 38-pin XMC family positioning (vs XMC1201T038F0200AAXUMA1)
- Same XMC1000-series ecosystem for established firmware continuity (vs XMC1201T038F0200AAXUMA1)
- 38-pin package offers more connectivity than compact low-pin-count alternatives (vs STM32G031C8T6TR)
Design Notes
Assign the layout from the PG-TSSOP-38-9 manufacturer package drawing rather than a generic 38-pin TSSOP footprint. Confirm pin 1 orientation, lead width, pitch, solder-mask clearance, and paste-land dimensions against the Infineon mechanical document. Place all decoupling capacitors close to their associated supply and ground pins, and provide a low-impedance ground return without splitting the ground plane under the device.
Design the 3.3 V and 5 V supply paths for both steady-state and transient demands. Check whether a regulated supply, external reset circuit, brownout behavior, and decoupling arrangement are mandatory for the chosen board topology. Review the exact device supply pins and grounding requirements before connecting circuitry; the stated 3.3 V and 5 V operating modes do not by themselves define every rail, sequencing, or power-consumption condition.
Do not treat a similarly packaged ARM Cortex-M0 MCU as a drop-in replacement solely because it also has 38 pins. Compare every pin name, alternate-function mapping, power input, ground connection, reset behavior, clock source, programming interface, and peripheral resource. The XMC1201 and XMC1302 families can differ in memory and peripheral configuration even when their package dimensions appear similar.
Keep the oscillator path, if used, short and surrounded by a stable ground reference, while keeping it away from switching power nodes and high-current outputs. Route external communication lines away from sensitive analog inputs, and provide accessible programming and reset test points. Review unused pins and termination requirements in the device datasheet rather than leaving their board connections to assumption.
Compliance Information
The exact ordering code was identified as an industrial Infineon XMC1000-series microcontroller. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documents were not stated in the available manufacturer listing.